[dpdk-dev] pktgen counters not

[Wiles, Keith]

Most of the counters come from the NIC hardware, but I have to do the different sizes in software. If the packet was received then it will get counted as that works in my machine and many others. Unless I broke something in Pktgen it would mean to me that the packets are not getting received by the hardware or something else is going on.

Regards,
Keith



On 6/20/16, 4:16 PM, "dev on behalf of Posadas, Emerson" <dev-bounces at dpdk.org on behalf of emerson.posadas at intel.com> wrote:

>Hello
>
>I'm running the pktgen application to do some benchmarking. My current issue with pktgen is that I don't get any packet counted against the packet size on the application even after sending some traffic. 
>
>  Flags:Port    :   P--------------:0   P--------------:1
>Link State      :       <UP-10000-FD>       <UP-10000-FD>       ----TotalRate----
>Pkts/s Max/Rx   :                 0/0                 0/0                     0/0
>       Max/Tx   :          14194206/0          14194254/0              28388460/0
>MBits/s Rx/Tx   :                 0/0                 0/0                     0/0
>Broadcast       :                   0                   0
>Multicast       :                   0                   0
>  64 Bytes      :                   0                   0
>  65-127        :                   0                   0
>  128-255       :                   0                   0
>  256-511       :                   0                   0
>  512-1023      :                   0                   0
>  1024-1518     :                   0                   0
>
>I'm using DPDK 16.04 with pktgen 3.0.00 and using the following pktgen configuration flags:
>./app/app/x86_64-native-linuxapp-gcc/app/pktgen -c 0x1ff  -n 2 -- -P -m "[1-4].0, [5-8].1"
>
>My NIC device is a dual port 10GbE Intel Corporation 82599EB PCIe card. 
>
>EP
>
>