[dpdk-dev] [PATCH] ip_pipeline: add Python script file for creating visual diagram of IP pipeline config file
Jasvinder Singh
jasvinder.singh at intel.com
Thu Jun 23 19:50:13 CEST 2016
This commit adds Python script for generating diagram of the application
configuration file. This script requires graphviz package to be installed
on the machine. The input config file is translated to an output file in
DOT syntax, which is then used to create the image file using graphviz.
To run the script, following command is used;
./diagram-generator.py -f <input configuration file>
Some optional arguments are as follows:
-h, --help show this help message and exit
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu at intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh at intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu at intel.com>
---
examples/ip_pipeline/config/diagram-generator.py | 331 +++++++++++++++++++++++
1 file changed, 331 insertions(+)
create mode 100755 examples/ip_pipeline/config/diagram-generator.py
diff --git a/examples/ip_pipeline/config/diagram-generator.py b/examples/ip_pipeline/config/diagram-generator.py
new file mode 100755
index 0000000..3aafe3e
--- /dev/null
+++ b/examples/ip_pipeline/config/diagram-generator.py
@@ -0,0 +1,331 @@
+#! /usr/bin/python2
+
+# BSD LICENSE
+#
+# Copyright(c) 2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#
+# This script creates a visual representation for the configuration file. The
+# input config file is translated to an output file in DOT syntax, which is
+# then used to create the image file using graphviz (www.graphviz.org).
+#
+
+import argparse
+import re
+import os
+
+#
+# Command to generate the image file
+#
+DOT_COMMAND = "dot -Gsize=20,30 -Tpng %s > %s"
+DOT_NOT_FOUND_MSG = """Unable to locate \"dot\" executable.
+ You may need to install the \"graphviz\" package (www.graphviz.org)."""
+
+#
+# Layout of generated DOT file
+#
+DOT_GRAPH_BEGIN = \
+ "digraph g {\n graph [ splines = true rankdir = \"LR\" ]\n"
+DOT_NODE_LINK_RX = \
+ " \"%s RX\" [ shape = box style = filled fillcolor = yellowgreen ]\n"
+DOT_NODE_LINK_TX = \
+ " \"%s TX\" [ shape = box style = filled fillcolor = yellowgreen ]\n"
+DOT_NODE_KNI_RX = \
+ " \"%s RX\" [ shape = box style = filled fillcolor = orange ]\n"
+DOT_NODE_KNI_TX = \
+ " \"%s TX\" [ shape = box style = filled fillcolor = orange ]\n"
+DOT_NODE_TAP_RX = \
+ " \"%s RX\" [ shape = box style = filled fillcolor = gold ]\n"
+DOT_NODE_TAP_TX = \
+ " \"%s TX\" [ shape = box style = filled fillcolor = gold ]\n"
+DOT_NODE_SOURCE = \
+ " \"%s\" [ shape = box style = filled fillcolor = darkgreen ]\n"
+DOT_NODE_SINK = \
+ " \"%s\" [ shape = box style = filled fillcolor = peachpuff ]\n"
+DOT_NODE_PIPELINE = \
+ " \"%s\" [ shape = box style = filled fillcolor = royalblue ]\n"
+DOT_NODE_EDGE_PKTQ = \
+ " \"%s\" -> \"%s\" [ label = \"%s\" color = gray ]\n"
+DOT_GRAPH_END = \
+ "}\n"
+
+# Edge ID | Edge Label | Writer | Reader | Dependencies
+# --------+------------+-----------+-----------+--------------
+# RXQx.y | RXQx.y | LINKx | PIPELINEz | LINKx
+# TXQx.y | TXQx.y | PIPELINEz | LINKx | LINKx
+# SWQx | SWQx | PIPELINEy | PIPELINEz | -
+# TMx | TMx | PIPELINEy | PIPELINEz | LINKx
+# KNIx RX | KNIx | KNIx RX | PIPELINEy | KNIx, LINKx
+# KNIx TX | KNIx | PIPELINEy | KNIx TX | KNIx, LINKx
+# TAPx RX | TAPx | TAPx RX | PIPELINEy | TAPx
+# TAPx TX | TAPx | PIPELINEy | TAPx TX | TAPx
+# SOURCEx | SOURCEx | SOURCEx | PIPELINEy | SOURCEx
+# SINKx | SINKx | PIPELINEy | SINKx | SINKx
+
+
+def process_config_file(cfgfile):
+ edges = dict()
+ links = set()
+ knis = set()
+ taps = set()
+ sources = set()
+ sinks = set()
+ pipelines = set()
+ pipeline = ""
+
+ dotfile = cfgfile + ".txt"
+ imgfile = cfgfile + ".png"
+
+ #
+ # Read config file
+ #
+ lines = tuple(open(cfgfile, 'r'))
+ for line in lines:
+ # Remove any leading and trailing white spaces
+ line = line.strip()
+
+ # Remove any comment at end of line
+ line, sep, tail = line.partition(";")
+
+ # Look for next "PIPELINE" section
+ match = re.search(r'\[(PIPELINE\d+)\]', line)
+ if match:
+ pipeline = match.group(1)
+ continue
+
+ # Look for next "pktq_in" section entry
+ match = re.search(r'pktq_in\s*=\s*(.+)', line)
+ if match:
+ pipelines.add(pipeline)
+ for q in re.findall('\S+', match.group(1)):
+ match_rxq = re.search(r'^RXQ(\d+)\.\d+$', q)
+ match_swq = re.search(r'^SWQ\d+$', q)
+ match_tm = re.search(r'^TM(\d+)$', q)
+ match_kni = re.search(r'^KNI(\d+)$', q)
+ match_tap = re.search(r'^TAP\d+$', q)
+ match_source = re.search(r'^SOURCE\d+$', q)
+
+ # ID
+ q_id = ""
+ if match_rxq or match_swq or match_tm or match_source:
+ q_id = q
+ elif match_kni or match_tap:
+ q_id = q + " RX"
+ else:
+ print "Unrecognized pktq_in element \"%s\"" % q
+ return
+
+ # Add new edge
+ if q_id not in edges:
+ edges[q_id] = dict()
+ if "label" not in edges[q_id]:
+ edges[q_id]["label"] = q
+ if "readers" not in edges[q_id]:
+ edges[q_id]["readers"] = list()
+ if "writers" not in edges[q_id]:
+ edges[q_id]["writers"] = list()
+
+ # Add reader for the new edge
+ edges[q_id]["readers"].append(pipeline)
+
+ # RXQ
+ if match_rxq:
+ link = "LINK" + str(match_rxq.group(1))
+ edges[q_id]["writers"].append(link + " RX")
+ links.add(link)
+ continue
+
+ # SWQ
+ if match_swq:
+ continue
+
+ # TM
+ if match_tm:
+ link = "LINK" + str(match_tm.group(1))
+ links.add(link)
+ continue
+
+ # KNI
+ if match_kni:
+ link = "LINK" + str(match_kni.group(1))
+ edges[q_id]["writers"].append(q_id)
+ knis.add(q)
+ links.add(link)
+ continue
+
+ # TAP
+ if match_tap:
+ edges[q_id]["writers"].append(q_id)
+ taps.add(q)
+ continue
+
+ # SOURCE
+ if match_source:
+ edges[q_id]["writers"].append(q)
+ sources.add(q)
+ continue
+
+ continue
+
+ # Look for next "pktq_out" section entry
+ match = re.search(r'pktq_out\s*=\s*(.+)', line)
+ if match:
+ for q in re.findall('\S+', match.group(1)):
+ match_txq = re.search(r'^TXQ(\d+)\.\d+$', q)
+ match_swq = re.search(r'^SWQ\d+$', q)
+ match_tm = re.search(r'^TM(\d+)$', q)
+ match_kni = re.search(r'^KNI(\d+)$', q)
+ match_tap = re.search(r'^TAP(\d+)$', q)
+ match_sink = re.search(r'^SINK(\d+)$', q)
+
+ # ID
+ q_id = ""
+ if match_txq or match_swq or match_tm or match_sink:
+ q_id = q
+ elif match_kni or match_tap:
+ q_id = q + " TX"
+ else:
+ print "Unrecognized pktq_out element \"%s\"" % q
+ return
+
+ # Add new edge
+ if q_id not in edges:
+ edges[q_id] = dict()
+ if "label" not in edges[q_id]:
+ edges[q_id]["label"] = q
+ if "readers" not in edges[q_id]:
+ edges[q_id]["readers"] = list()
+ if "writers" not in edges[q_id]:
+ edges[q_id]["writers"] = list()
+
+ # Add writer for the new edge
+ edges[q_id]["writers"].append(pipeline)
+
+ # TXQ
+ if match_txq:
+ link = "LINK" + str(match_txq.group(1))
+ edges[q_id]["readers"].append(link + " TX")
+ links.add(link)
+ continue
+
+ # SWQ
+ if match_swq:
+ continue
+
+ # TM
+ if match_tm:
+ link = "LINK" + str(match_tm.group(1))
+ links.add(link)
+ continue
+
+ # KNI
+ if match_kni:
+ link = "LINK" + str(match_kni.group(1))
+ edges[q_id]["readers"].append(q_id)
+ knis.add(q)
+ links.add(link)
+ continue
+
+ # TAP
+ if match_tap:
+ edges[q_id]["readers"].append(q_id)
+ taps.add(q)
+ continue
+
+ # SINK
+ if match_sink:
+ edges[q_id]["readers"].append(q)
+ sinks.add(q)
+ continue
+
+ continue
+
+ #
+ # Write DOT file
+ #
+ dot_cmd = DOT_COMMAND % (dotfile, imgfile)
+ file = open(dotfile, "w")
+ file.write("#\n# Command to generate image file:\n# \t%s\n#\n\n" % dot_cmd)
+
+ file.write(DOT_GRAPH_BEGIN)
+ for l in sorted(links):
+ file.write(DOT_NODE_LINK_RX % l)
+ file.write(DOT_NODE_LINK_TX % l)
+ for k in sorted(knis):
+ file.write(DOT_NODE_KNI_RX % k)
+ file.write(DOT_NODE_KNI_TX % k)
+ for t in sorted(taps):
+ file.write(DOT_NODE_TAP_RX % t)
+ file.write(DOT_NODE_TAP_TX % t)
+ for s in sorted(sources):
+ file.write(DOT_NODE_SOURCE % s)
+ for s in sorted(sinks):
+ file.write(DOT_NODE_SINK % s)
+ for p in sorted(pipelines):
+ file.write(DOT_NODE_PIPELINE % p)
+
+ for q in sorted(edges.keys()):
+ rw = edges[q]
+ if "writers" not in rw:
+ print "\"%s\" has no writer" % q
+ return
+ if "readers" not in rw:
+ print "\"%s\" has no reader" % q
+ return
+ for w in rw["writers"]:
+ for r in rw["readers"]:
+ file.write(DOT_NODE_EDGE_PKTQ % (w, r, rw["label"]))
+
+ file.write(DOT_GRAPH_END)
+ file.close()
+
+ #
+ # Execute dot
+ #
+ if os.system("which dot"):
+ print dot_not_found_msg
+ return
+
+ os.system(dot_cmd)
+
+
+if __name__ == "__main__":
+ parser = argparse.ArgumentParser(description="""Create visual diagram for
+ IP pipeline configuration file.""")
+
+ parser.add_argument(
+ '-f',
+ '--file',
+ help="Input configuration file",
+ required=True)
+
+ args = parser.parse_args()
+
+ process_config_file(args.file)
--
2.5.5
More information about the dev
mailing list