[dpdk-dev] [PATCH v2] bnx2x: fix icc compilation error

Ferruh Yigit ferruh.yigit at intel.com
Mon Jun 27 18:02:33 CEST 2016


Fix icc warning:
error #188: enumerated type mixed with another type

Fixed the code for simple cases caused the warning.
Still need to disable compiler warning because of more complex case.

Signed-off-by: Ferruh Yigit <ferruh.yigit at intel.com>
---
 drivers/net/bnx2x/Makefile | 4 ++++
 drivers/net/bnx2x/elink.c  | 8 ++++----
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/bnx2x/Makefile b/drivers/net/bnx2x/Makefile
index 6f1f385..c2ddd8d 100644
--- a/drivers/net/bnx2x/Makefile
+++ b/drivers/net/bnx2x/Makefile
@@ -14,6 +14,10 @@ EXPORT_MAP := rte_pmd_bnx2x_version.map
 
 LIBABIVER := 1
 
+ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
+CFLAGS += -wd188 #188: enumerated type mixed with another type
+endif
+
 #
 # all source are stored in SRCS-y
 #
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c
index b9149b8..149cc97 100644
--- a/drivers/net/bnx2x/elink.c
+++ b/drivers/net/bnx2x/elink.c
@@ -5029,7 +5029,7 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
 	if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
 		PMD_DRV_LOG(DEBUG, "1G parallel detect link on port %d",
 			    params->port);
-		return 1;
+		return ELINK_STATUS_ERROR;
 	}
 
 	CL22_RD_OVER_CL45(sc, phy,
@@ -5039,7 +5039,7 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
 	if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
 		PMD_DRV_LOG(DEBUG, "10G parallel detect link on port %d",
 			    params->port);
-		return 1;
+		return ELINK_STATUS_ERROR;
 	}
 	return ELINK_STATUS_OK;
 }
@@ -6735,7 +6735,7 @@ static elink_status_t elink_8073_is_snr_needed(struct bnx2x_softc *sc,
 	if (val != 0x102)
 		return ELINK_STATUS_OK;
 
-	return 1;
+	return ELINK_STATUS_ERROR;
 }
 
 static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
@@ -7557,7 +7557,7 @@ static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
 						   uint16_t byte_cnt,
 						   uint8_t * o_buf)
 {
-	elink_status_t rc = 0;
+	elink_status_t rc = ELINK_STATUS_OK;
 	uint8_t xfer_size;
 	uint8_t *user_data = o_buf;
 	read_sfp_module_eeprom_func_p read_func;
-- 
2.5.5



More information about the dev mailing list