[dpdk-dev] [PATCH 1/4] ixgbe: support UDP tunnel add/del

[Qiu, Michael]

On 1/11/2016 3:08 PM, Wenzhuo Lu wrote:
> Add UDP tunnel add/del support on ixgbe. Now it only support
> VxLAN port configuration.
> Although the VxLAN port has a default value 4789, it can be
> changed. We support VxLAN port configuration to meet the
> change.
> Note, the default value of VxLAN port in ixgbe NICs is 0. So
> please set it when using VxLAN off-load.
>
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> ---
>  drivers/net/ixgbe/ixgbe_ethdev.c | 93 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 93 insertions(+)
>
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
> index 4c4c6df..381cbad 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -337,6 +337,10 @@ static int ixgbe_timesync_read_time(struct rte_eth_dev *dev,
>  				   struct timespec *timestamp);
>  static int ixgbe_timesync_write_time(struct rte_eth_dev *dev,
>  				   const struct timespec *timestamp);
> +static int ixgbe_dev_udp_tunnel_add(struct rte_eth_dev *dev,
> +				    struct rte_eth_udp_tunnel *udp_tunnel);
> +static int ixgbe_dev_udp_tunnel_del(struct rte_eth_dev *dev,
> +				    struct rte_eth_udp_tunnel *udp_tunnel);
>  
>  /*
>   * Define VF Stats MACRO for Non "cleared on read" register
> @@ -495,6 +499,8 @@ static const struct eth_dev_ops ixgbe_eth_dev_ops = {
>  	.timesync_adjust_time = ixgbe_timesync_adjust_time,
>  	.timesync_read_time   = ixgbe_timesync_read_time,
>  	.timesync_write_time  = ixgbe_timesync_write_time,
> +	.udp_tunnel_add       = ixgbe_dev_udp_tunnel_add,
> +	.udp_tunnel_del       = ixgbe_dev_udp_tunnel_del,
>  };
>  
>  /*
> @@ -6191,6 +6197,93 @@ ixgbe_dev_get_dcb_info(struct rte_eth_dev *dev,
>  	return 0;
>  }
>  
> +#define DEFAULT_VXLAN_PORT 4789
> +
> +/* on x550, there's only one register for VxLAN UDP port.
> + * So, we cannot add or del the port. We only update it.
> + */
> +static int
> +ixgbe_update_vxlan_port(struct ixgbe_hw *hw,
> +			uint16_t port)
> +{
> +	IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, port);
> +	IXGBE_WRITE_FLUSH(hw);
> +
> +	return 0;
> +}
> +
> +/* Add UDP tunneling port */
> +static int
> +ixgbe_dev_udp_tunnel_add(struct rte_eth_dev *dev,
> +			 struct rte_eth_udp_tunnel *udp_tunnel)
> +{
> +	int ret = 0;
> +	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +
> +	if (hw->mac.type != ixgbe_mac_X550 &&
> +	    hw->mac.type != ixgbe_mac_X550EM_x) {
> +		return -ENOTSUP;
> +	}
> +
> +	if (udp_tunnel == NULL)
> +		return -EINVAL;
> +
> +	switch (udp_tunnel->prot_type) {
> +	case RTE_TUNNEL_TYPE_VXLAN:
> +		/* cannot add a port, update the port value */
> +		ret = ixgbe_update_vxlan_port(hw, udp_tunnel->udp_port);
> +		break;
> +
> +	case RTE_TUNNEL_TYPE_GENEVE:
> +	case RTE_TUNNEL_TYPE_TEREDO:
> +		PMD_DRV_LOG(ERR, "Tunnel type is not supported now.");
> +		ret = -1;
> +		break;
> +
> +	default:
> +		PMD_DRV_LOG(ERR, "Invalid tunnel type");
> +		ret = -1;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +/* Remove UDP tunneling port */
> +static int
> +ixgbe_dev_udp_tunnel_del(struct rte_eth_dev *dev,
> +			 struct rte_eth_udp_tunnel *udp_tunnel)
> +{
> +	int ret = 0;
> +	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +
> +	if (hw->mac.type != ixgbe_mac_X550 &&
> +	    hw->mac.type != ixgbe_mac_X550EM_x) {
> +		return -ENOTSUP;
> +	}
> +
> +	if (udp_tunnel == NULL)
> +		return -EINVAL;
> +
> +	switch (udp_tunnel->prot_type) {
> +	case RTE_TUNNEL_TYPE_VXLAN:
> +		/* cannot del the port, reset it to default */
> +		ret = ixgbe_update_vxlan_port(hw, DEFAULT_VXLAN_PORT);
> +		break;
> +	case RTE_TUNNEL_TYPE_GENEVE:
> +	case RTE_TUNNEL_TYPE_TEREDO:
> +		PMD_DRV_LOG(ERR, "Tunnel type is not supported now.");
> +		ret = -1;

Better to use the -EINVAL or other, mixed style always not good.

Thanks,
Michael
> +		break;
> +	default:
> +		PMD_DRV_LOG(ERR, "Invalid tunnel type");
> +		ret = -1;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
>  static struct rte_driver rte_ixgbe_driver = {
>  	.type = PMD_PDEV,
>  	.init = rte_ixgbe_pmd_init,