[dpdk-dev] [PATCH v5 0/2] fm10k: enable FTAG based forwarding

[Wang, Xiao W]

Hi,

We reached a consensus on configuring FTAG by devargs method, any other suggestion
or concern for this patch?

Best Regards,
Xiao

> -----Original Message-----
> From: Liu, Yong
> Sent: Tuesday, March 8, 2016 3:58 PM
> To: Wang, Xiao W <xiao.w.wang at intel.com>; Chen, Jing D
> <jing.d.chen at intel.com>
> Cc: dev at dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v5 0/2] fm10k: enable FTAG based forwarding
> 
> Tested-by: Yong Liu <yong.liu at intel.com>
> 
> - Tested Branch: dpdk-next-net/rel_16_04
> - Tested Commit: 4ac366ba647909c3b71818f9be9db86ba5e871da
> - OS: Fedora20 3.11.10-301.fc20.x86_64
> - GCC: gcc version 4.8.3 20140911
> - CPU: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
> - NIC: Intel Corporation Device RedrockCanyou [8086:15a4]
> - Default x86_64-native-linuxapp-gcc configuration
> - Prerequisites:
> - Total 1 cases, 1 passed, 0 failed
> 
> - Prerequisites command / instruction:
>   Apply fm_ftag unit test patch.
>   export Port0 and Port1's GLORT ID to environment variables
>     export PORT1_GLORT=0x4200
>     export PORT0_GLORT=0x4000
> 
> - Case: Ftag forwarding unit test
>   Description: check fm10k nic can forwarding packets based on FTAG
>   Command / instruction:
>     Start test application and run fm10k_ftag_autotest
>       test -c f -n 4 -w 83:00.0,enable_ftag=1 -w 85:00.0,enable_ftag=1
>       RTE>>fm10k_ftag_autotest
>     Send packet to Port0 and verify packet forwarded to Port1
>       Receive 1 packets on port 0
>       test for FTAG RX passed
>       Send out 1 packets with FTAG on port 0
>       Receive 1 packets on port 1
>       test for FTAG TX passed
>       Test OK
> 
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Wang Xiao W
> > Sent: Wednesday, March 02, 2016 7:19 PM
> > To: Chen, Jing D
> > Cc: dev at dpdk.org
> > Subject: [dpdk-dev] [PATCH v5 0/2] fm10k: enable FTAG based forwarding
> >
> > v5:
> > * Used kvargs api to parse the devargs parameter.
> > * Put release note into the driver patch.
> >
> > v4:
> > * Removed the build time config option, used devargs to config FTAG.
> > * Rebased on head of dpdk-next-net/rel_16_04 branch.
> >
> > v3:
> > * Removed "\n" in PMD_INIT_LOG.
> > * Returned "-ENOTSUP" instead of -1 in VF FTAG use case.
> >
> > v2:
> > * Gave an error message for VF FTAG use case.
> > * Added a notice in the doc to emphasize that application should ensure
> >   an appropriate FTAG for every frame in FTAG based forwarding mode.
> >
> > Wang Xiao W (2):
> >   fm10k: enable FTAG based forwarding
> >   doc: add introduction for fm10k FTAG based forwarding
> >
> >  doc/guides/nics/fm10k.rst              | 16 ++++++++-
> >  doc/guides/rel_notes/release_16_04.rst |  2 ++
> >  drivers/net/fm10k/fm10k.h              |  2 ++
> >  drivers/net/fm10k/fm10k_ethdev.c       | 65
> > +++++++++++++++++++++++++++++++++-
> >  drivers/net/fm10k/fm10k_rxtx.c         | 15 ++++++++
> >  drivers/net/fm10k/fm10k_rxtx_vec.c     |  3 ++
> >  6 files changed, 101 insertions(+), 2 deletions(-)
> >
> > --
> > 1.9.3