[dpdk-dev] [PATCH 1/8] snow3g: rename libsso reference due to library update

Pablo de Lara pablo.de.lara.guarch at intel.com
Fri May 6 16:03:42 CEST 2016


The underlying libsso library that SNOW3G PMD uses has been updated,
so now it is called libsso_snow3g. Also, the path to the library
has been renamed to reflect this changes (now called LIBSSO_SNOW3G_PATH).

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
---
 doc/guides/cryptodevs/snow3g.rst |  6 +++---
 drivers/crypto/snow3g/Makefile   | 10 +++++-----
 mk/rte.app.mk                    |  4 ++--
 scripts/test-build.sh            |  6 +++---
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/doc/guides/cryptodevs/snow3g.rst b/doc/guides/cryptodevs/snow3g.rst
index c1098b1..8564c9f 100644
--- a/doc/guides/cryptodevs/snow3g.rst
+++ b/doc/guides/cryptodevs/snow3g.rst
@@ -58,7 +58,7 @@ Installation
 ------------
 
 To build DPDK with the SNOW3G_PMD the user is required to download
-the export controlled ``libsso`` library, by requesting it from
+the export controlled ``libsso_snow3g`` library, by requesting it from
 `<https://networkbuilders.intel.com/network-technologies/dpdk>`_,
 and compiling it on their system before building DPDK::
 
@@ -96,10 +96,10 @@ Initialization
 
 In order to enable this virtual crypto PMD, user must:
 
-* Export the environmental variable LIBSSO_PATH with the path where
+* Export the environmental variable LIBSSO_SNOW3G_PATH with the path where
   the library was extracted.
 
-* Build the LIBSSO library (explained in Installation section).
+* Build the LIBSSO_SNOW3G library (explained in Installation section).
 
 * Set CONFIG_RTE_LIBRTE_PMD_SNOW3G=y in config/common_base.
 
diff --git a/drivers/crypto/snow3g/Makefile b/drivers/crypto/snow3g/Makefile
index ee58270..b86e608 100644
--- a/drivers/crypto/snow3g/Makefile
+++ b/drivers/crypto/snow3g/Makefile
@@ -30,8 +30,8 @@
 
 include $(RTE_SDK)/mk/rte.vars.mk
 
-ifeq ($(LIBSSO_PATH),)
-$(error "Please define LIBSSO_PATH environment variable")
+ifeq ($(LIBSSO_SNOW3G_PATH),)
+$(error "Please define LIBSSO_SNOW3G_PATH environment variable")
 endif
 
 # library name
@@ -48,9 +48,9 @@ LIBABIVER := 1
 EXPORT_MAP := rte_pmd_snow3g_version.map
 
 # external library include paths
-CFLAGS += -I$(LIBSSO_PATH)
-CFLAGS += -I$(LIBSSO_PATH)/include
-CFLAGS += -I$(LIBSSO_PATH)/build
+CFLAGS += -I$(LIBSSO_SNOW3G_PATH)
+CFLAGS += -I$(LIBSSO_SNOW3G_PATH)/include
+CFLAGS += -I$(LIBSSO_SNOW3G_PATH)/build
 
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += rte_snow3g_pmd.c
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 65352a7..afa251c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -162,9 +162,9 @@ else ifeq ($(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM),y)
 _LDLIBS-y += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
 endif
 
-# SNOW3G PMD is dependent on the LIBSSO library
+# SNOW3G PMD is dependent on the LIBSSO-SNOW3G library
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -lrte_pmd_snow3g
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -L$(LIBSSO_PATH)/build -lsso
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
 
 # KASUMI PMD is dependent on the LIBSSO-KASUMI library
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI)     += -lrte_pmd_kasumi
diff --git a/scripts/test-build.sh b/scripts/test-build.sh
index 55e3e58..53d0ca0 100755
--- a/scripts/test-build.sh
+++ b/scripts/test-build.sh
@@ -44,7 +44,7 @@ default_path=$PATH
 # - DPDK_DEP_ZLIB (y/[n])
 # - DPDK_MAKE_JOBS (int)
 # - DPDK_NOTIFY (notify-send)
-# - LIBSSO_PATH
+# - LIBSSO_SNOW3G_PATH
 # - LIBSSO_KASUMI_PATH
 . $(dirname $(readlink -e $0))/load-devel-config.sh
 
@@ -120,7 +120,7 @@ reset_env ()
 	unset DPDK_DEP_SZE
 	unset DPDK_DEP_ZLIB
 	unset AESNI_MULTI_BUFFER_LIB_PATH
-	unset LIBSSO_PATH
+	unset LIBSSO_SNOW3G_PATH
 	unset LIBSSO_KASUMI_PATH
 	unset PQOS_INSTALL_PATH
 }
@@ -164,7 +164,7 @@ config () # <directory> <target> <options>
 		sed -ri       's,(PMD_AESNI_MB=)n,\1y,' $1/.config
 		test -z "$AESNI_MULTI_BUFFER_LIB_PATH" || \
 		sed -ri      's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
-		test -z "$LIBSSO_PATH" || \
+		test -z "$LIBSSO_SNOW3G_PATH" || \
 		sed -ri         's,(PMD_SNOW3G=)n,\1y,' $1/.config
 		test -z "$LIBSSO_KASUMI_PATH" || \
 		sed -ri         's,(PMD_KASUMI=)n,\1y,' $1/.config
-- 
2.5.0



More information about the dev mailing list