[dpdk-dev] [PATCH v3 02/12] net/virtio: setup and start cq in configure callback

Yao, Lei A lei.a.yao at intel.com
Wed Nov 2 02:38:47 CET 2016


Hi, Olivier

During the validation work with v16.11-rc2, I find that this patch will cause VM crash if enable virtio bonding in VM. Could you have a check at your side? The following is steps at my side. Thanks a lot

1. bind PF port to igb_uio.
modprobe uio
insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
./tools/dpdk-devbind.py --bind=igb_uio 84:00.1

2. start vhost switch.
./examples/vhost/build/vhost-switch -c 0x1c0000 -n 4 --socket-mem 4096,4096 - -p 0x1 --mergeable 0 --vm2vm 0 --socket-file ./vhost-net

3. bootup one vm with four virtio net device
qemu-system-x86_64 \
-name vm0 -enable-kvm -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
-device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
-daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
-net nic,vlan=0,macaddr=00:00:00:c7:56:64,addr=1f \
net user,vlan=0,hostfwd=tcp:10.239.129.127:6107:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
-chardev socket,id=char1,path=./vhost-net \
-netdev type=vhost-user,id=netdev1,chardev=char1,vhostforce \
-device virtio-net-pci,netdev=netdev1,mac=52:54:00:00:00:02 \
-chardev socket,id=char2,path=./vhost-net \
-netdev type=vhost-user,id=netdev2,chardev=char2,vhostforce \
-device virtio-net-pci,netdev=netdev2,mac=52:54:00:00:00:03 \
-chardev socket,id=char3,path=./vhost-net \
-netdev type=vhost-user,id=netdev3,chardev=char3,vhostforce \
-device virtio-net-pci,netdev=netdev3,mac=52:54:00:00:00:04 \
-cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img -vnc :10

4. on vm:
bind virtio net device to igb_uio
modprobe uio
insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
tools/dpdk-devbind.py --bind=igb_uio 00:04.0 00:05.0 00:06.0 00:07.0
5. startup test_pmd app
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 - -i --txqflags=0xf00 --disable-hw-vlan-filter
6. create one bonding device (port 4)
create bonded device 0 0 (the first 0: mode, the second: the socket number)
show bonding config 4
7. bind port 0, 1, 2 to port 4
add bonding slave 0 4
add bonding slave 1 4
add bonding slave 2 4
port start 4
Result: just after port start 4(port 4 is bonded port), the vm shutdown immediately.

BRs
Lei

-----Original Message-----
From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Olivier Matz
Sent: Thursday, October 13, 2016 10:16 PM
To: dev at dpdk.org; yuanhan.liu at linux.intel.com
Cc: Ananyev, Konstantin <konstantin.ananyev at intel.com>; Chandran, Sugesh <sugesh.chandran at intel.com>; Richardson, Bruce <bruce.richardson at intel.com>; Tan, Jianfeng <jianfeng.tan at intel.com>; Zhang, Helin <helin.zhang at intel.com>; adrien.mazarguil at 6wind.com; stephen at networkplumber.org; dprovan at bivio.net; Wang, Xiao W <xiao.w.wang at intel.com>; maxime.coquelin at redhat.com
Subject: [dpdk-dev] [PATCH v3 02/12] net/virtio: setup and start cq in configure callback

Move the configuration of control queue in the configure callback.
This is needed by next commit, which introduces the reinitialization of the device in the configure callback to change the feature flags.
Therefore, the control queue will have to be restarted at the same place.

As virtio_dev_cq_queue_setup() is called from a place where
config->max_virtqueue_pairs is not available, we need to store this in
the private structure. It replaces max_rx_queues and max_tx_queues which have the same value. The log showing the value of max_rx_queues and max_tx_queues is also removed since config->max_virtqueue_pairs is already displayed above.

Signed-off-by: Olivier Matz <olivier.matz at 6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin at redhat.com>
---
 drivers/net/virtio/virtio_ethdev.c | 43 +++++++++++++++++++-------------------
 drivers/net/virtio/virtio_ethdev.h |  4 ++--
 drivers/net/virtio/virtio_pci.h    |  3 +--
 3 files changed, 24 insertions(+), 26 deletions(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 77ca569..f3921ac 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -552,6 +552,9 @@ virtio_dev_close(struct rte_eth_dev *dev)
 	if (hw->started == 1)
 		virtio_dev_stop(dev);
 
+	if (hw->cvq)
+		virtio_dev_queue_release(hw->cvq->vq);
+
 	/* reset the NIC */
 	if (dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
 		vtpci_irq_config(hw, VIRTIO_MSI_NO_VECTOR); @@ -1191,16 +1194,7 @@ virtio_init_device(struct rte_eth_dev *eth_dev)
 			config->max_virtqueue_pairs = 1;
 		}
 
-		hw->max_rx_queues =
-			(VIRTIO_MAX_RX_QUEUES < config->max_virtqueue_pairs) ?
-			VIRTIO_MAX_RX_QUEUES : config->max_virtqueue_pairs;
-		hw->max_tx_queues =
-			(VIRTIO_MAX_TX_QUEUES < config->max_virtqueue_pairs) ?
-			VIRTIO_MAX_TX_QUEUES : config->max_virtqueue_pairs;
-
-		virtio_dev_cq_queue_setup(eth_dev,
-					config->max_virtqueue_pairs * 2,
-					SOCKET_ID_ANY);
+		hw->max_queue_pairs = config->max_virtqueue_pairs;
 
 		PMD_INIT_LOG(DEBUG, "config->max_virtqueue_pairs=%d",
 				config->max_virtqueue_pairs);
@@ -1211,19 +1205,15 @@ virtio_init_device(struct rte_eth_dev *eth_dev)
 				config->mac[2], config->mac[3],
 				config->mac[4], config->mac[5]);
 	} else {
-		hw->max_rx_queues = 1;
-		hw->max_tx_queues = 1;
+		PMD_INIT_LOG(DEBUG, "config->max_virtqueue_pairs=1");
+		hw->max_queue_pairs = 1;
 	}
 
-	PMD_INIT_LOG(DEBUG, "hw->max_rx_queues=%d   hw->max_tx_queues=%d",
-			hw->max_rx_queues, hw->max_tx_queues);
 	if (pci_dev)
 		PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
 			eth_dev->data->port_id, pci_dev->id.vendor_id,
 			pci_dev->id.device_id);
 
-	virtio_dev_cq_start(eth_dev);
-
 	return 0;
 }
 
@@ -1285,7 +1275,6 @@ static int
 eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev)  {
 	struct rte_pci_device *pci_dev;
-	struct virtio_hw *hw = eth_dev->data->dev_private;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -1301,9 +1290,6 @@ eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev)
 	eth_dev->tx_pkt_burst = NULL;
 	eth_dev->rx_pkt_burst = NULL;
 
-	if (hw->cvq)
-		virtio_dev_queue_release(hw->cvq->vq);
-
 	rte_free(eth_dev->data->mac_addrs);
 	eth_dev->data->mac_addrs = NULL;
 
@@ -1352,6 +1338,7 @@ virtio_dev_configure(struct rte_eth_dev *dev)  {
 	const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
 	struct virtio_hw *hw = dev->data->dev_private;
+	int ret;
 
 	PMD_INIT_LOG(DEBUG, "configure");
 
@@ -1360,6 +1347,16 @@ virtio_dev_configure(struct rte_eth_dev *dev)
 		return -EINVAL;
 	}
 
+	/* Setup and start control queue */
+	if (vtpci_with_feature(hw, VIRTIO_NET_F_CTRL_VQ)) {
+		ret = virtio_dev_cq_queue_setup(dev,
+			hw->max_queue_pairs * 2,
+			SOCKET_ID_ANY);
+		if (ret < 0)
+			return ret;
+		virtio_dev_cq_start(dev);
+	}
+
 	hw->vlan_strip = rxmode->hw_vlan_strip;
 
 	if (rxmode->hw_vlan_filter
@@ -1553,8 +1550,10 @@ virtio_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		dev_info->driver_name = dev->driver->pci_drv.driver.name;
 	else
 		dev_info->driver_name = "virtio_user PMD";
-	dev_info->max_rx_queues = (uint16_t)hw->max_rx_queues;
-	dev_info->max_tx_queues = (uint16_t)hw->max_tx_queues;
+	dev_info->max_rx_queues =
+		RTE_MIN(hw->max_queue_pairs, VIRTIO_MAX_RX_QUEUES);
+	dev_info->max_tx_queues =
+		RTE_MIN(hw->max_queue_pairs, VIRTIO_MAX_TX_QUEUES);
 	dev_info->min_rx_bufsize = VIRTIO_MIN_RX_BUFSIZE;
 	dev_info->max_rx_pktlen = VIRTIO_MAX_RX_PKTLEN;
 	dev_info->max_mac_addrs = VIRTIO_MAX_MAC_ADDRS; diff --git a/drivers/net/virtio/virtio_ethdev.h b/drivers/net/virtio/virtio_ethdev.h
index 04d626b..dc18341 100644
--- a/drivers/net/virtio/virtio_ethdev.h
+++ b/drivers/net/virtio/virtio_ethdev.h
@@ -47,8 +47,8 @@
 #define PAGE_SIZE 4096
 #endif
 
-#define VIRTIO_MAX_RX_QUEUES 128
-#define VIRTIO_MAX_TX_QUEUES 128
+#define VIRTIO_MAX_RX_QUEUES 128U
+#define VIRTIO_MAX_TX_QUEUES 128U
 #define VIRTIO_MAX_MAC_ADDRS 64
 #define VIRTIO_MIN_RX_BUFSIZE 64
 #define VIRTIO_MAX_RX_PKTLEN  9728
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h index b8295a7..6930cd6 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -246,8 +246,7 @@ struct virtio_hw {
 	struct virtnet_ctl *cvq;
 	struct rte_pci_ioport io;
 	uint64_t    guest_features;
-	uint32_t    max_tx_queues;
-	uint32_t    max_rx_queues;
+	uint32_t    max_queue_pairs;
 	uint16_t    vtnet_hdr_size;
 	uint8_t	    vlan_strip;
 	uint8_t	    use_msix;
--
2.8.1



More information about the dev mailing list