[dpdk-dev] [PATCH 12/16] e1000/base: always request clock during K1 at 1G link speed
Wenzhuo Lu
wenzhuo.lu at intel.com
Wed Nov 23 18:22:56 CET 2016
This works around a possible stalled packet issue, which may
occur due to clock recovery from the PCH being too slow, when
the LAN is transitioning from K1 at 1G link speed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
drivers/net/e1000/base/e1000_ich8lan.c | 10 ++++++++++
drivers/net/e1000/base/e1000_ich8lan.h | 2 +-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/e1000/base/e1000_ich8lan.c b/drivers/net/e1000/base/e1000_ich8lan.c
index 7ab0f7c..89265d2 100644
--- a/drivers/net/e1000/base/e1000_ich8lan.c
+++ b/drivers/net/e1000/base/e1000_ich8lan.c
@@ -1584,6 +1584,16 @@ STATIC s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
hw->phy.ops.write_reg_locked(hw,
I217_PLL_CLOCK_GATE_REG,
phy_reg);
+
+ if (speed == SPEED_1000) {
+ hw->phy.ops.read_reg_locked(hw, HV_PM_CTRL,
+ &phy_reg);
+
+ phy_reg |= HV_PM_CTRL_K1_CLK_REQ;
+
+ hw->phy.ops.write_reg_locked(hw, HV_PM_CTRL,
+ phy_reg);
+ }
}
hw->phy.ops.release(hw);
diff --git a/drivers/net/e1000/base/e1000_ich8lan.h b/drivers/net/e1000/base/e1000_ich8lan.h
index 50e0e79..bc4ed1d 100644
--- a/drivers/net/e1000/base/e1000_ich8lan.h
+++ b/drivers/net/e1000/base/e1000_ich8lan.h
@@ -250,7 +250,7 @@ POSSIBILITY OF SUCH DAMAGE.
/* PHY Power Management Control */
#define HV_PM_CTRL PHY_REG(770, 17)
-#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
+#define HV_PM_CTRL_K1_CLK_REQ 0x200
#define HV_PM_CTRL_K1_ENABLE 0x4000
#define I217_PLL_CLOCK_GATE_REG PHY_REG(772, 28)
--
1.9.3
More information about the dev
mailing list