[dpdk-dev] [PATCH] net/ixgbe: support detection of hot swapped SFP/SFP+

[Lu, Wenzhuo]

Hi Srini,

> -----Original Message-----
> From: Srini J [mailto:srinidpdk at gmail.com]
> Sent: Thursday, April 20, 2017 6:48 PM
> To: Lu, Wenzhuo; Ananyev, Konstantin
> Cc: dev at dpdk.org; Srinivasan Jayarajan
> Subject: [PATCH] net/ixgbe: support detection of hot swapped SFP/SFP+
> 
> From: Srinivasan Jayarajan <srinidpdk at gmail.com>
> 
>     Adds support to use a different SFP/SFP+ without restarting the
>     DPDK app. rte_eth_dev_stop()/rte_eth_dev_start() will need
>     to be called on the port to detect the SFP/SFP+ change.
> 
> Signed-off-by: Srinivasan Jayarajan <srinidpdk at gmail.com>
> ---
>  drivers/net/ixgbe/ixgbe_ethdev.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> b/drivers/net/ixgbe/ixgbe_ethdev.c
> index c226e0a..85407a9 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -2520,6 +2520,19 @@ static int eth_ixgbevf_pci_remove(struct
> rte_pci_device *pci_dev)
>  	status = ixgbe_pf_reset_hw(hw);
>  	if (status != 0)
>  		return -1;
> +
> +	/* Set phy type as unknown so that PHY scan is always done */
> +	hw->phy.type = ixgbe_phy_unknown;
> +
> +	/* Identify PHY and related function pointers */
> +	status = hw->phy.ops.init(hw);
> +
> +	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) {
> +		PMD_INIT_LOG(ERR, "Found unsupported SFP in "
> +					"ixgbe_dev_start(): %d", status);
> +		return -1;
> +	}
> +
I have the concern if it's a good idea to move the functions from dev_init to dev_start. Especially this function named init.
Anyway, let's listen to others opinion.


>  	hw->mac.ops.start_hw(hw);
>  	hw->mac.get_link_status = true;
> 
> --
> 1.8.1.4