[dpdk-dev] [PATCH v3] eal: read and parse device option separately

[Gaetan Rivet]

When the EAL parses the common options given to the application,
not all subsystems are available. Some device drivers are registered
afterward upon dynamic plugin loading.

Devices using those drivers are thus unable to be parsed by any drivers
and are rejected.

Store the device options first and keep them for later processing.
Parse these right before initializing the buses, the drivers must have
been stabilized at this point.

Signed-off-by: Gaetan Rivet <gaetan.rivet at 6wind.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz at ng4t.com>
---

v2:

  - Fix the -w / -b incompatibility check.
    It was checking that no two incompatible rte_devargs were inserted.
    As rte_devargs are now generated right before buses scan, this check
    was always correct, even when it should have failed.

v3:

  - Fix variable name (deo --> devopt)
  - Use static variables to check for -w and -b concomitant use.

 lib/librte_eal/bsdapp/eal/eal.c            |  5 ++
 lib/librte_eal/common/eal_common_options.c | 83 ++++++++++++++++++++++++++----
 lib/librte_eal/common/eal_options.h        |  1 +
 lib/librte_eal/linuxapp/eal/eal.c          |  5 ++
 4 files changed, 84 insertions(+), 10 deletions(-)

diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c
index 80fe21d..5fa5988 100644
--- a/lib/librte_eal/bsdapp/eal/eal.c
+++ b/lib/librte_eal/bsdapp/eal/eal.c
@@ -614,6 +614,11 @@ rte_eal_init(int argc, char **argv)
 		rte_config.master_lcore, thread_id, cpuset,
 		ret == 0 ? "" : "...");
 
+	if (eal_option_device_parse()) {
+		rte_errno = ENODEV;
+		return -1;
+	}
+
 	if (rte_bus_scan()) {
 		rte_eal_init_alert("Cannot scan the buses for devices\n");
 		rte_errno = ENODEV;
diff --git a/lib/librte_eal/common/eal_common_options.c b/lib/librte_eal/common/eal_common_options.c
index 56c368c..1da185e 100644
--- a/lib/librte_eal/common/eal_common_options.c
+++ b/lib/librte_eal/common/eal_common_options.c
@@ -47,6 +47,7 @@
 #include <rte_eal.h>
 #include <rte_log.h>
 #include <rte_lcore.h>
+#include <rte_tailq.h>
 #include <rte_version.h>
 #include <rte_devargs.h>
 #include <rte_memcpy.h>
@@ -125,11 +126,67 @@ static const char *default_solib_dir = RTE_EAL_PMD_PATH;
 static const char dpdk_solib_path[] __attribute__((used)) =
 "DPDK_PLUGIN_PATH=" RTE_EAL_PMD_PATH;
 
+TAILQ_HEAD(device_option_list, device_option);
+
+struct device_option {
+	TAILQ_ENTRY(device_option) next;
+
+	enum rte_devtype type;
+	char arg[];
+};
+
+static struct device_option_list devopt_list =
+TAILQ_HEAD_INITIALIZER(devopt_list);
 
 static int master_lcore_parsed;
 static int mem_parsed;
 static int core_parsed;
 
+static int
+eal_option_device_add(enum rte_devtype type, const char *optarg)
+{
+	struct device_option *devopt;
+	size_t optlen;
+	int ret;
+
+	optlen = strlen(optarg) + 1;
+	devopt = calloc(1, sizeof(*devopt) + optlen);
+	if (devopt == NULL) {
+		RTE_LOG(ERR, EAL, "Unable to allocate device option\n");
+		return -ENOMEM;
+	}
+
+	devopt->type = type;
+	ret = snprintf(devopt->arg, optlen, "%s", optarg);
+	if (ret < 0) {
+		RTE_LOG(ERR, EAL, "Unable to copy device option\n");
+		free(devopt);
+		return -EINVAL;
+	}
+	TAILQ_INSERT_TAIL(&devopt_list, devopt, next);
+	return 0;
+}
+
+int
+eal_option_device_parse(void)
+{
+	struct device_option *devopt;
+	void *tmp;
+	int ret = 0;
+
+	TAILQ_FOREACH_SAFE(devopt, &devopt_list, next, tmp) {
+		if (ret == 0) {
+			ret = rte_eal_devargs_add(devopt->type, devopt->arg);
+			if (ret)
+				RTE_LOG(ERR, EAL, "Unable to parse device '%s'\n",
+					devopt->arg);
+		}
+		TAILQ_REMOVE(&devopt_list, devopt, next);
+		free(devopt);
+	}
+	return ret;
+}
+
 void
 eal_reset_internal_config(struct internal_config *internal_cfg)
 {
@@ -941,20 +998,29 @@ int
 eal_parse_common_option(int opt, const char *optarg,
 			struct internal_config *conf)
 {
+	static int b_used;
+	static int w_used;
+
 	switch (opt) {
 	/* blacklist */
 	case 'b':
-		if (rte_eal_devargs_add(RTE_DEVTYPE_BLACKLISTED_PCI,
+		if (w_used)
+			goto bw_used;
+		if (eal_option_device_add(RTE_DEVTYPE_BLACKLISTED_PCI,
 				optarg) < 0) {
 			return -1;
 		}
+		b_used = 1;
 		break;
 	/* whitelist */
 	case 'w':
-		if (rte_eal_devargs_add(RTE_DEVTYPE_WHITELISTED_PCI,
+		if (b_used)
+			goto bw_used;
+		if (eal_option_device_add(RTE_DEVTYPE_WHITELISTED_PCI,
 				optarg) < 0) {
 			return -1;
 		}
+		w_used = 1;
 		break;
 	/* coremask */
 	case 'c':
@@ -1061,7 +1127,7 @@ eal_parse_common_option(int opt, const char *optarg,
 		break;
 
 	case OPT_VDEV_NUM:
-		if (rte_eal_devargs_add(RTE_DEVTYPE_VIRTUAL,
+		if (eal_option_device_add(RTE_DEVTYPE_VIRTUAL,
 				optarg) < 0) {
 			return -1;
 		}
@@ -1100,6 +1166,10 @@ eal_parse_common_option(int opt, const char *optarg,
 	}
 
 	return 0;
+bw_used:
+	RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "
+		"cannot be used at the same time\n");
+	return -1;
 }
 
 static void
@@ -1187,13 +1257,6 @@ eal_check_common_options(struct internal_config *internal_cfg)
 		return -1;
 	}
 
-	if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 &&
-		rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) {
-		RTE_LOG(ERR, EAL, "Options blacklist (-b) and whitelist (-w) "
-			"cannot be used at the same time\n");
-		return -1;
-	}
-
 	return 0;
 }
 
diff --git a/lib/librte_eal/common/eal_options.h b/lib/librte_eal/common/eal_options.h
index a881c62..439a261 100644
--- a/lib/librte_eal/common/eal_options.h
+++ b/lib/librte_eal/common/eal_options.h
@@ -91,6 +91,7 @@ extern const struct option eal_long_options[];
 
 int eal_parse_common_option(int opt, const char *argv,
 			    struct internal_config *conf);
+int eal_option_device_parse(void);
 int eal_adjust_config(struct internal_config *internal_cfg);
 int eal_check_common_options(struct internal_config *internal_cfg);
 void eal_common_usage(void);
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c
index b28bbab..48f12f4 100644
--- a/lib/librte_eal/linuxapp/eal/eal.c
+++ b/lib/librte_eal/linuxapp/eal/eal.c
@@ -889,6 +889,11 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (eal_option_device_parse()) {
+		rte_errno = ENODEV;
+		return -1;
+	}
+
 	if (rte_bus_scan()) {
 		rte_eal_init_alert("Cannot scan the buses for devices\n");
 		rte_errno = ENODEV;
-- 
2.1.4