[dpdk-dev] [PATCH] i40e: fix i40e_validate_mac_addr to permit multicast addresses
Ferruh Yigit
ferruh.yigit at intel.com
Thu Aug 31 17:53:33 CEST 2017
On 8/22/2017 11:21 PM, David Harton wrote:
> The i40e maintains a single MAC filter table for both
> unicast and multicast addresses. The i40e_validate_mac_addr
> function was preventing multicast addresses from being added
> to the table via i40evf_add_mac_addr. Fixed the issue by
> removing the multicast address check in i40e_validate_mac_addr.
>
> Signed-off-by: David Harton <dharton at cisco.com>
> ---
> drivers/net/i40e/base/i40e_common.c | 12 +++++-------
> drivers/net/i40e/i40e_ethdev.c | 3 ++-
> 2 files changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
> index 900d379..9779854 100644
> --- a/drivers/net/i40e/base/i40e_common.c
> +++ b/drivers/net/i40e/base/i40e_common.c
> @@ -969,10 +969,10 @@ struct i40e_rx_ptype_decoded i40e_ptype_lookup[] = {
>
>
> /**
> - * i40e_validate_mac_addr - Validate unicast MAC address
> + * i40e_validate_mac_addr - Validate MAC address
> * @mac_addr: pointer to MAC address
> *
> - * Tests a MAC address to ensure it is a valid Individual Address
> + * Tests a MAC address to ensure it is a valid Address
> **/
> enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr)
> {
> @@ -980,13 +980,11 @@ enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr)
>
> DEBUGFUNC("i40e_validate_mac_addr");
>
> - /* Broadcast addresses ARE multicast addresses
> - * Make sure it is not a multicast address
> + /*
> * Reject the zero address
> */
> - if (I40E_IS_MULTICAST(mac_addr) ||
> - (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
> - mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0))
> + if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
> + mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
> status = I40E_ERR_INVALID_MAC_ADDR;
>
> return status;
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 5f26e24..00b6082 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -1199,7 +1199,8 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
>
> /* Get and check the mac address */
> i40e_get_mac_addr(hw, hw->mac.addr);
> - if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS) {
> + if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS ||
> + I40E_IS_MULTICAST(hw->mac.addr)) {
As far as I can see this is to set PF permanent mac address during
init(), i40e_macaddr_add() can be used to set multicast address filters.
Why do you want to set multicast address as mac permanent address?
Any chance that you want to update i40evf_add_mac_addr() to let
multicast addresses?
> PMD_INIT_LOG(ERR, "mac address is not valid");
> ret = -EIO;
> goto err_get_mac_addr;
>
More information about the dev
mailing list