[dpdk-dev] A question about GRO neighbor packet matching

Hu, Jiayu jiayu.hu at intel.com
Thu Dec 7 09:31:35 CET 2017


Hi all,

> -----Original Message-----
> From: Stephen Hemminger [mailto:stephen at networkplumber.org]
> Sent: Thursday, December 7, 2017 9:02 AM
> To: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Cc: Ilya Matveychikov <matvejchikov at gmail.com>; dev at dpdk.org; Hu, Jiayu
> <jiayu.hu at intel.com>
> Subject: Re: [dpdk-dev] A question about GRO neighbor packet matching
> 
> On Thu, 7 Dec 2017 00:19:46 +0000
> "Ananyev, Konstantin" <konstantin.ananyev at intel.com> wrote:
> 
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Stephen
> Hemminger
> > > Sent: Wednesday, December 6, 2017 11:16 PM
> > > To: Ilya Matveychikov <matvejchikov at gmail.com>
> > > Cc: dev at dpdk.org; Hu, Jiayu <jiayu.hu at intel.com>
> > > Subject: Re: [dpdk-dev] A question about GRO neighbor packet matching
> > >
> > > On Wed, 6 Dec 2017 22:38:12 +0400
> > > Ilya Matveychikov <matvejchikov at gmail.com> wrote:
> > >
> > > > > On Dec 6, 2017, at 10:12 PM, Stephen Hemminger
> <stephen at networkplumber.org> wrote:
> > > > >
> > > > > On Wed, 6 Dec 2017 18:02:21 +0400
> > > > > Ilya Matveychikov <matvejchikov at gmail.com> wrote:
> > > > >
> > > > >> Hello all,
> > > > >>
> > > > >>
> > > > >> My question is about neighbor packet matching algorithm for TCP. Is
> it
> > > > >> correct to expect that IP packets should have continuous ID
> enumeration
> > > > >> (i.e. iph-next.id = iph-prev.id + 1)?
> > > > >
> > > > >
> > > > > No.
> > > > >
> > > > >> ~~~
> > > > >> lib/librte_gro/gro_tcp4.c:check_seq_option()
> > > > >> 	...
> > > > >> 	/* check if the two packets are neighbors */
> > > > >> 	tcp_dl0 = pkt0->pkt_len - pkt0->l2_len - pkt0->l3_len -
> tcp_hl0;
> > > > >> 	if ((sent_seq == (item->sent_seq + tcp_dl0)) &&
> > > > >> 			(ip_id == (item->ip_id + 1)))
> > > > >> 		/* append the new packet */
> > > > >> 		return 1;
> > > > >> 	else if (((sent_seq + tcp_dl) == item->sent_seq) &&
> > > > >> 			((ip_id + item->nb_merged) == item->ip_id))
> > > > >> 		/* pre-pend the new packet */
> > > > >> 		return -1;
> > > > >> 	else
> > > > >> 		return 0;
> > > > >> ~~~
> > > > >>
> > > > >> As per RFC791:
> > > > >>
> > > > >>  Identification:  16 bits
> > > > >>
> > > > >>    An identifying value assigned by the sender to aid in assembling the
> > > > >>    fragments of a datagram.
> > > > >
> > > > > The IP header id is meaningless in most TCP sessions.
> > > > > Good TCP implementations use PMTU discovery which sets the Don't
> Fragment bit.
> > > > > With DF, the IP id is unused (since no fragmentation).
> > > > > Many implementations just send 0 since generating unique IP id
> requires an
> > > > > atomic operation which is potential bottleneck.
> > > >
> > > > So, is my question correct and the code is wrong?
> > > >
> > >
> > > Yes. This code is wrong on several areas.
> > > * The ip_id on TCP flows is irrelevant.

@Stephen and @Konstantin:
In the latest linux, its GRO supports two kinds of IP ID: fixed or incremental.
You can see the commit 1530545ed64b42e87acb43c0c16401bd1ebae6bf.
It uses "skb->is_atomic" to reflect if the IP ID is ignored. Linux GRO only checks
 IP ID for the packets which are non-atomic (is_atomic is 0), and these packets use
incremental IP ID. Others, which are atomic, use fixed IP ID and Linux doesn't check
their IP ID.

You can see the codes in tcp_offload.c:
	if (NAPI_GRO_CB(p)->flush_id != 1 || NAPI_GRO_CB(p)->count != 1 ||
		!NAPI_GRO_CB(p)->is_atomic)
			flush |= NAPI_GRO_CB(p)->flush_id;

In af_inet.c, is_atomic is set:
	NAPI_GRO_CB(skb)->is_atomic = !!(iph->frag_off & htons(IP_DF));

I haven't figured out which kind of packets are set to is_atomic in Linux.
Maybe Linux has followed RFC 6864. I need to investigate further.
Especially, we plan to support tunneled GRO. The outer IP ID will encounter
the same issue.

If you have any suggestions, that will be highly appreciated.

> > > * packet should only be merged if TCP flags are the same.

@Stephen, we do check TCP flags when decide if two packets can be merged.

Thanks,
Jiayu
> > >
> > >
> > > The author should look at Linux net/ipv4/tcp_offload.c
> >
> > As I remember, linux GRO implementation *does* require that IP IDs
> > of the merging packets to be continuous.
> >
> > net/ipv4/af_inet.c:
> > static struct sk_buff **inet_gro_receive(struct sk_buff **head,
> > 					 struct sk_buff *skb)
> > {
> >   	...
> >  	id = ntohl(*(__be32 *)&iph->id);
> > 	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id &
> ~IP_DF));
> > 	id >>= 16;
> >
> > 	...
> >
> > 	NAPI_GRO_CB(p)->flush_id =
> > 			    ((u16)(ntohs(iph2->id) + NAPI_GRO_CB(p)->count)
> ^ id);
> > 	NAPI_GRO_CB(p)->flush |= flush;
> >                ....
> >
> > And then at net/ipv4/tcp_offload.c:
> > struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
> > {
> > 	...
> > 	/* Include the IP ID check below from the inner most IP hdr */
> > 	flush = NAPI_GRO_CB(p)->flush | NAPI_GRO_CB(p)->flush_id;
> > 	...
> > 	if (flush || skb_gro_receive(head, skb)) {
> >  	...
> >
> > The reason why we do need to check that IP ID is continuous -
> > DPDK GRO library doesn't strip off IPv4 header, instead it has to merge
> them into one.
> > If IP ID would be non-contiguous it is unclear which one should be to used.
> > By same reason packets with different IP/TCP options are not allowed.
> > So in that case GRO lib makes a decision that it isn't safe to merge these
> packets.
> > As I understand linux does pretty much the same.
> > Konstantin
> 
> You are right, but still not sure that Linux and DPDK are doing
> the same thing with reordered packets.
> 
> Ok, went RFC hunting and the relevant one seems to be RFC 6864.
> It mandates unique id's for each datagram so TCP does send them.
> 



More information about the dev mailing list