[dpdk-dev] [PATCH v2 09/39] examples/bond: convert to new ethdev offloads API
Shahaf Shuler
shahafs at mellanox.com
Tue Dec 12 13:26:26 CET 2017
Ethdev offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new API.
Signed-off-by: Shahaf Shuler <shahafs at mellanox.com>
Reviewed-by: Radu Nicolau <radu.nicolau at intel.com>
---
examples/bond/main.c | 65 +++++++++++++++++++++++++++++++++++++++--------
1 file changed, 55 insertions(+), 10 deletions(-)
diff --git a/examples/bond/main.c b/examples/bond/main.c
index 8e3b1f3..d0050b3 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -151,11 +151,8 @@
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .ignore_offload_bitfield = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.rx_adv_conf = {
.rss_conf = {
@@ -165,6 +162,7 @@
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
+ .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
},
};
@@ -174,10 +172,28 @@
int retval;
uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
if (portid >= rte_eth_dev_count())
rte_exit(EXIT_FAILURE, "Invalid port\n");
+ rte_eth_dev_info_get(portid, &dev_info);
+ if ((dev_info.rx_offload_capa & port_conf.rxmode.offloads) !=
+ port_conf.rxmode.offloads) {
+ printf("Some Rx offloads are not supported "
+ "by port %d: requested 0x%lx supported 0x%lx\n",
+ portid, port_conf.rxmode.offloads,
+ dev_info.rx_offload_capa);
+ }
+ if ((dev_info.tx_offload_capa & port_conf.txmode.offloads) !=
+ port_conf.txmode.offloads) {
+ printf("Some Tx offloads are not supported "
+ "by port %d: requested 0x%lx supported 0x%lx\n",
+ portid, port_conf.txmode.offloads,
+ dev_info.tx_offload_capa);
+ }
retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
@@ -189,16 +205,22 @@
"failed (res=%d)\n", portid, retval);
/* RX setup */
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = port_conf.rxmode.offloads;
retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
- rte_eth_dev_socket_id(portid), NULL,
+ rte_eth_dev_socket_id(portid),
+ &rxq_conf,
mbuf_pool);
if (retval < 0)
rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)",
portid, retval);
/* TX setup */
+ txq_conf = dev_info.default_txconf;
+ txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txq_conf.offloads = port_conf.txmode.offloads;
retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
- rte_eth_dev_socket_id(portid), NULL);
+ rte_eth_dev_socket_id(portid), &txq_conf);
if (retval < 0)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
@@ -225,6 +247,9 @@
uint8_t i;
uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
retval = rte_eth_bond_create("bond0", BONDING_MODE_ALB,
0 /*SOCKET_ID_ANY*/);
@@ -234,6 +259,21 @@
BOND_PORT = retval;
+ rte_eth_dev_info_get(BOND_PORT, &dev_info);
+ if ((dev_info.rx_offload_capa & port_conf.rxmode.offloads) !=
+ port_conf.rxmode.offloads) {
+ printf("Some Rx offloads are not supported "
+ "by port %d: requested 0x%lx supported 0x%lx\n",
+ BOND_PORT, port_conf.rxmode.offloads,
+ dev_info.rx_offload_capa);
+ }
+ if ((dev_info.tx_offload_capa & port_conf.txmode.offloads) !=
+ port_conf.txmode.offloads) {
+ printf("Some Tx offloads are not supported "
+ "by port %d: requested 0x%lx supported 0x%lx\n",
+ BOND_PORT, port_conf.txmode.offloads,
+ dev_info.tx_offload_capa);
+ }
retval = rte_eth_dev_configure(BOND_PORT, 1, 1, &port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
@@ -245,16 +285,21 @@
"failed (res=%d)\n", BOND_PORT, retval);
/* RX setup */
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = port_conf.rxmode.offloads;
retval = rte_eth_rx_queue_setup(BOND_PORT, 0, nb_rxd,
- rte_eth_dev_socket_id(BOND_PORT), NULL,
- mbuf_pool);
+ rte_eth_dev_socket_id(BOND_PORT),
+ &rxq_conf, mbuf_pool);
if (retval < 0)
rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)",
BOND_PORT, retval);
/* TX setup */
+ txq_conf = dev_info.default_txconf;
+ txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txq_conf.offloads = port_conf.txmode.offloads;
retval = rte_eth_tx_queue_setup(BOND_PORT, 0, nb_txd,
- rte_eth_dev_socket_id(BOND_PORT), NULL);
+ rte_eth_dev_socket_id(BOND_PORT), &txq_conf);
if (retval < 0)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
--
1.8.3.1
More information about the dev
mailing list