[dpdk-dev] [PATCH 50/50] doc: added documents

Shijith Thotton shijith.thotton at caviumnetworks.com
Tue Feb 21 10:27:05 CET 2017


Added doc/guides/nics/liquidio.rst and
doc/guides/nics/features/liquidio.ini. Updated release notes.

Signed-off-by: Shijith Thotton <shijith.thotton at caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob at caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles at caviumnetworks.com>
---
 doc/guides/nics/features/liquidio.ini  |  29 ++++
 doc/guides/nics/index.rst              |   1 +
 doc/guides/nics/liquidio.rst           | 269 +++++++++++++++++++++++++++++++++
 doc/guides/rel_notes/release_17_05.rst |   3 +
 4 files changed, 302 insertions(+)
 create mode 100644 doc/guides/nics/features/liquidio.ini
 create mode 100644 doc/guides/nics/liquidio.rst

diff --git a/doc/guides/nics/features/liquidio.ini b/doc/guides/nics/features/liquidio.ini
new file mode 100644
index 0000000..eac32ba
--- /dev/null
+++ b/doc/guides/nics/features/liquidio.ini
@@ -0,0 +1,29 @@
+;
+; Supported features of the 'LiquidIO' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status          = Y
+Link status event    = Y
+MTU update           = Y
+Jumbo frame          = Y
+Scattered Rx         = Y
+Allmulticast mode    = Y
+RSS hash             = Y
+RSS key update       = Y
+RSS reta update      = Y
+SR-IOV               = Y
+VLAN filter          = Y
+CRC offload          = Y
+VLAN offload         = P
+L3 checksum offload  = Y
+L4 checksum offload  = Y
+Inner L3 checksum    = Y
+Inner L4 checksum    = Y
+Basic stats          = Y
+Extended stats       = Y
+Linux UIO            = Y
+Linux VFIO           = Y
+x86-64               = Y
+Usage doc            = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 5248625..37e6416 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -47,6 +47,7 @@ Network Interface Controller Drivers
     ixgbe
     intel_vf
     kni
+    liquidio
     mlx4
     mlx5
     nfp
diff --git a/doc/guides/nics/liquidio.rst b/doc/guides/nics/liquidio.rst
new file mode 100644
index 0000000..4bf586b
--- /dev/null
+++ b/doc/guides/nics/liquidio.rst
@@ -0,0 +1,269 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Cavium, Inc.. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Cavium, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+LiquidIO VF Poll Mode Driver
+============================
+
+The LiquidIO VF PMD library(librte_pmd_lio) provides poll mode driver support for
+Cavium LiquidIO® II server adapter VFs. PF management and VF creation can be
+done using kernel driver.
+
+Supported LiquidIO Adapters
+-----------------------------
+
+- LiquidIO II CN2350 210SV
+
+
+Pre-Installation Configuration
+------------------------------
+
+The following options can be modified in the ``config`` file.
+Please note that enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_LIO_PMD`` (default ``y``)
+
+  Toggle compilation of LiquidIO PMD.
+
+- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER`` (default ``n``)
+
+  Toggle display of generic debugging messages.
+
+- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT`` (default ``n``)
+
+  Toggle display of initialization related messages.
+
+- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_RX`` (default ``n``)
+
+  Toggle display of receive fast path run-time messages.
+
+- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_TX`` (default ``n``)
+
+  Toggle display of transmit fast path run-time messages.
+
+- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX`` (default ``n``)
+
+  Toggle display of mailbox messages.
+
+- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS`` (default ``n``)
+
+  Toggle display of register reads and writes.
+
+
+.. _lio_driver-compilation:
+
+Driver Compilation
+------------------
+
+To compile LiquidIO PMD for Linux x86_64 gcc target, run the following "make"
+command:
+
+.. code-block:: console
+
+   cd <DPDK-source-directory>
+   make install T=x86_64-native-linuxapp-gcc
+
+
+Sample Application Notes
+------------------------
+
+This section demonstrates how to launch ``testpmd`` with LiquidIO® CN23X0
+device managed by ``librte_pmd_lio`` in Linux operating system.
+
+#. Mount huge pages:
+
+   .. code-block:: console
+
+      mkdir /mnt/huge
+      mount -t hugetlbfs nodev /mnt/huge
+
+#. Request huge pages:
+
+   .. code-block:: console
+
+      echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+
+#. Load ``vfio-pci`` driver:
+
+   .. code-block:: console
+
+      modprobe vfio-pci
+
+#. Bind the LiquidIO VFs to ``vfio-pci`` loaded in previous step:
+
+   Setup VFIO permissions for regular users and then bind to ``vfio-pci``:
+
+   .. code-block:: console
+
+      sudo chmod a+x /dev/vfio
+
+      sudo chmod 0666 /dev/vfio/*
+
+      ./usertools/dpdk-devbind.py --bind vfio-pci 0000:03:00.3 0000:03:08.3
+
+#. Start ``testpmd`` with basic parameters:
+
+   .. code-block:: console
+
+      ./build/app/testpmd -c 0xf -n 4 -- -i
+
+   Example output:
+
+   .. code-block:: console
+
+      [...]
+      EAL: PCI device 0000:03:00.3 on NUMA socket 0
+      EAL:   probe driver: 177d:9712 net_liovf
+      EAL:   using IOMMU type 1 (Type 1)
+      PMD: net_liovf[03:00.3]INFO: DEVICE : CN23XX VF
+      EAL: PCI device 0000:03:08.3 on NUMA socket 0
+      EAL:   probe driver: 177d:9712 net_liovf
+      PMD: net_liovf[03:08.3]INFO: DEVICE : CN23XX VF
+      Interactive-mode selected
+      USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
+      Configuring Port 0 (socket 0)
+      PMD: net_liovf[03:00.3]INFO: Starting port 0
+      Port 0: F2:A8:1B:5E:B4:66
+      Configuring Port 1 (socket 0)
+      PMD: net_liovf[03:08.3]INFO: Starting port 1
+      Port 1: 32:76:CC:EE:56:D7
+      Checking link statuses...
+      Port 0 Link Up - speed 10000 Mbps - full-duplex
+      Port 1 Link Up - speed 10000 Mbps - full-duplex
+      Done
+      testpmd>
+
+
+SR-IOV: Prerequisites and Sample Application Notes
+--------------------------------------------------
+
+This section provides instructions to configure SR-IOV with Linux OS.
+
+#. Verify SR-IOV and ARI capabilities are enabled on the adapter using ``lspci``:
+
+   .. code-block:: console
+
+      lspci -s <slot> -vvv
+
+   Example output:
+
+   .. code-block:: console
+
+      [...]
+      Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
+      [...]
+      Capabilities: [178 v1] Single Root I/O Virtualization (SR-IOV)
+      [...]
+      Kernel driver in use: LiquidIO
+
+#. Load the kernel module:
+
+   .. code-block:: console
+
+      modprobe liquidio
+
+#. Bring up the PF ports:
+
+   .. code-block:: console
+
+      ifconfig p4p1 up
+      ifconfig p4p2 up
+
+#. Change PF MTU if required:
+
+   .. code-block:: console
+
+      ifconfig p4p1 mtu 9000
+      ifconfig p4p2 mtu 9000
+
+#. Create VF device(s):
+
+   Echo number of VFs to be created into ``"sriov_numvfs"`` sysfs entry
+   of the parent PF.
+
+   .. code-block:: console
+
+      echo 1 > /sys/bus/pci/devices/0000:03:00.0/sriov_numvfs
+      echo 1 > /sys/bus/pci/devices/0000:03:00.1/sriov_numvfs
+
+
+#. Assign VF MAC address:
+
+   Assign MAC address to the VF using iproute2 utility. The syntax is::
+
+      ip link set <PF iface> vf <VF id> mac <macaddr>
+
+   Example output:
+
+   .. code-block:: console
+
+      ip link set p4p1 vf 0 mac F2:A8:1B:5E:B4:66
+
+
+#. Assign VF(s) to VM.
+
+   The VF devices may be passed through to the guest VM using qemu or
+   virt-manager or virsh etc.
+
+   Example qemu guest launch command:
+
+   .. code-block:: console
+
+      ./qemu-system-x86_64 -name lio-vm -machine accel=kvm \
+      -cpu host -m 4096 -smp 4 \
+      -drive file=<disk_file>,if=none,id=disk1,format=<type> \
+      -device virtio-blk-pci,scsi=off,drive=disk1,id=virtio-disk1,bootindex=1 \
+      -device vfio-pci,host=03:00.3 -device vfio-pci,host=03:08.3
+
+
+#. Running testpmd
+
+   Refer :ref:`notes above <lio_driver-compilation>`
+   to compile and run ``testpmd`` application.
+   Use ``igb_uio`` instead of ``vfio-pci`` in VM.
+
+
+Limitations
+-----------
+
+VF MTU
+~~~~~~
+
+VF MTU is limited by PF MTU. Raise PF value before configuring VF for larger packet size.
+
+VLAN offload
+~~~~~~~~~~~~
+
+Tx VLAN insertion is not supported and consequently VLAN offload feature is
+marked partial.
+
+Ring size
+~~~~~~~~~
+
+Number of descriptors for Rx/Tx ring should be in the range 128 to 512.
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 48fb5bd..23a4bfe 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -41,6 +41,9 @@ New Features
      Also, make sure to start the actual text at the margin.
      =========================================================
 
+* **Added LiquidIO network PMD.**
+
+  Added poll mode driver support for Cavium LiquidIO II server adapter VFs.
 
 Resolved Issues
 ---------------
-- 
1.8.3.1



More information about the dev mailing list