[dpdk-dev] [PATCH v5 3/8] ethdev: reserve capability flags for PMD-specific API

Ananyev, Konstantin konstantin.ananyev at intel.com
Wed Jan 4 18:44:18 CET 2017



> -----Original Message-----
> From: Bie, Tiwei
> Sent: Wednesday, January 4, 2017 5:00 PM
> To: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Cc: dev at dpdk.org; adrien.mazarguil at 6wind.com; Lu, Wenzhuo <wenzhuo.lu at intel.com>; Mcnamara, John <john.mcnamara at intel.com>;
> olivier.matz at 6wind.com; thomas.monjalon at 6wind.com; Zhang, Helin <helin.zhang at intel.com>; Dai, Wei <wei.dai at intel.com>; Wang,
> Xiao W <xiao.w.wang at intel.com>
> Subject: Re: [PATCH v5 3/8] ethdev: reserve capability flags for PMD-specific API
> 
> On Wed, Jan 04, 2017 at 11:14:25PM +0800, Ananyev, Konstantin wrote:
> >
> >
> > > -----Original Message-----
> > > From: Bie, Tiwei
> > > Sent: Wednesday, January 4, 2017 2:39 PM
> > > To: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> > > Cc: dev at dpdk.org; adrien.mazarguil at 6wind.com; Lu, Wenzhuo <wenzhuo.lu at intel.com>; Mcnamara, John
> <john.mcnamara at intel.com>;
> > > olivier.matz at 6wind.com; thomas.monjalon at 6wind.com; Zhang, Helin <helin.zhang at intel.com>; Dai, Wei <wei.dai at intel.com>;
> Wang,
> > > Xiao W <xiao.w.wang at intel.com>
> > > Subject: Re: [PATCH v5 3/8] ethdev: reserve capability flags for PMD-specific API
> > >
> > > On Wed, Jan 04, 2017 at 10:21:08PM +0800, Ananyev, Konstantin wrote:
> > > > Hi Twei,
> > > >
> > > > > -----Original Message-----
> > > > > From: Bie, Tiwei
> > > > > Sent: Wednesday, January 4, 2017 7:22 AM
> > > > > To: dev at dpdk.org
> > > > > Cc: adrien.mazarguil at 6wind.com; Lu, Wenzhuo <wenzhuo.lu at intel.com>; Mcnamara, John <john.mcnamara at intel.com>;
> > > > > olivier.matz at 6wind.com; thomas.monjalon at 6wind.com; Ananyev, Konstantin <konstantin.ananyev at intel.com>; Zhang, Helin
> > > > > <helin.zhang at intel.com>; Dai, Wei <wei.dai at intel.com>; Wang, Xiao W <xiao.w.wang at intel.com>
> > > > > Subject: [PATCH v5 3/8] ethdev: reserve capability flags for PMD-specific API
> > > > >
> > > > > Reserve a Tx capability flag and a Rx capability flag, that can be
> > > > > used by PMD to define its own capability flags when implementing the
> > > > > PMD-specific API.
> > > > >
> > > > > Suggested-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> > > > > Signed-off-by: Tiwei Bie <tiwei.bie at intel.com>
> > > > > Acked-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> > > > > ---
> > > > >  lib/librte_ether/rte_ethdev.h | 2 ++
> > > > >  1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> > > > > index d465825..8800b39 100644
> > > > > --- a/lib/librte_ether/rte_ethdev.h
> > > > > +++ b/lib/librte_ether/rte_ethdev.h
> > > > > @@ -857,6 +857,7 @@ struct rte_eth_conf {
> > > > >  #define DEV_RX_OFFLOAD_TCP_LRO     0x00000010
> > > > >  #define DEV_RX_OFFLOAD_QINQ_STRIP  0x00000020
> > > > >  #define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
> > > > > +#define DEV_RX_OFFLOAD_RESERVED_0  0x00000080 /**< Used for PMD-specific API. */
> > > > >
> > > > >  /**
> > > > >   * TX offload capabilities of a device.
> > > > > @@ -874,6 +875,7 @@ struct rte_eth_conf {
> > > > >  #define DEV_TX_OFFLOAD_GRE_TNL_TSO      0x00000400    /**< Used for tunneling packet. */
> > > > >  #define DEV_TX_OFFLOAD_IPIP_TNL_TSO     0x00000800    /**< Used for tunneling packet. */
> > > > >  #define DEV_TX_OFFLOAD_GENEVE_TNL_TSO   0x00001000    /**< Used for tunneling packet. */
> > > > > +#define DEV_TX_OFFLOAD_RESERVED_0  0x00002000 /**< Used for PMD-specific API. */
> > > > >
> > > > >  /**
> > > > >   * Ethernet device information
> > > > > --
> > > > > 2.7.4
> > > >
> > > > I am not sure how that supposed to work and how user should know that DEV_RX_OFFLOAD_RESERVED_0
> > > > is actually a MACSEC for ixgbe?
> > >
> > > Users are not supposed to use DEV_RX_OFFLOAD_RESERVED_0, instead, they
> > > should use the capabilities and the likes defined in rte_pmd_ixgbe.h
> > > where the PMD-specifics APIs are declared:
> > >
> > > /**
> > >  * If these flags are advertised by the PMD, the NIC supports the MACsec
> > >  * offload. The incoming MACsec traffics can be offloaded transparently
> > >  * after the MACsec offload is configured correctly by the application.
> > >  * And the application can set the PKT_TX_IXGBE_MACSEC flag in mbufs to
> > >  * enable the MACsec offload for the packets to be transmitted.
> > >  */
> > > #define DEV_RX_OFFLOAD_IXGBE_MACSEC_STRIP	DEV_RX_OFFLOAD_RESERVED_0
> > > #define DEV_TX_OFFLOAD_IXGBE_MACSEC_INSERT	DEV_TX_OFFLOAD_RESERVED_0
> > >
> > > /**
> > >  * This event will occur when the PN counter in a MACsec connection
> > >  * reach the exhaustion threshold.
> > >  */
> > > #define RTE_ETH_EVENT_IXGBE_MACSEC		RTE_ETH_EVENT_RESERVED_0
> > >
> > > /**
> > >  * Offload the MACsec. This flag must be set by the application in mbuf
> > >  * to enable this offload feature for a packet to be transmitted.
> > >  */
> > > #define PKT_TX_IXGBE_MACSEC			PKT_TX_RESERVED_0
> > >
> > > PMD-specific APIs can only be used on the corresponding driver/device,
> > > so different PMD can share the same reserved bit to represent different
> > > things when implementing their own PMD-specific APIs.
> >
> > Ok, and why do we need it?
> > Why we can't just have PKT_TX_MACSEC straightway?
> > What are you trying to gain here?
> > Is it just for future opportunity to save an extra bit in mbuf.ol_flags?
> > I don't think we are short of bits here right now, and we don't consume them exra-fast
> > to start to worry about it.
> > Again, if it *really* would be for ixgbe only forever, and y don't want to waste a bit in tx_olflags,
> > why not to introduce device specific ol_flags in mbuf second cache line?
> > Probably uint16_t would be enough for that.
> >
> > >
> > > > Another question what to do if you would like to create a bonded device over two devices with different NIC types?
> > > > As I understand you can end up in situation when  DEV_RX_OFFLOAD_RESERVED_0  would mean different capabilities.
> > > > Why not to have this MACSEC capability and ol_flag value as generic ones, as you have them in previous versions of your patch?
> > >
> > > Those flags are only used in PMD-specific APIs. I don't think we could
> > > use the PMD-specific APIs provided by a certain PMD on a bonded device.
> >
> > I understand that.
> > My question was: suppose user would like to create a bonded device over 2 NICs.
> > One of them is ixgbe, while other would be some other type.
> > In future get_dev_info() for each of them might return DEV_RX_OFFLOAD_RESERVED_0  bit as set.
> > But it would mean completely different thing.
> > How bonded device would know that to deal properly?
> >
> > Another example - user has 2 NICs of different type and would like to send the same packet on both of them simultaneously.
> > As PKT_TX_RESERVED might mean different things for these devices, and user would like to use let say
> > PKT_TX_IXGBE_MACSEC on one of them, he would need to do a copy of them, instead just increment a refcnt.
> >
> > Similar issues might arise at RX handling: user got a packet with PKT_RX_RESERVED_0 set.
> > What does it really mean if there are different NIC types in the system?
> > The only way to answer that question, as I can see,  is to keep track from what NIC that packet was received.
> > Which I suppose, is not always convenient.
> >
> 
> The main purpose is to put the PMD-specific APIs in a separate
> namespace instead of mixing the PMD-specific APIs and global APIs
> up, and also save the bits in mbuf.ol_flags.
> 
> There are other ways to achieve this goal, such as introducing
> the PMD specific ol_flags in mbuf second cache line as you said.
> I just thought defining some reserved bits seems to be the most
> simple way which won't introduce many changes.
> 
> What's your suggestions? Should I just revert the changes and
> define the generic flags directly?

Yes, that would be my preference.
As I said above - spending extra bit in ol_flags  doesn't look like a big problem to me.
In return there would be no need to consider how to handle all that confusing scenarios in future.
Konstantin


> 
> Thanks & regards,
> Tiwei Bie


More information about the dev mailing list