[dpdk-dev] Port stats zero when using MLX5 DPDK driver

[Shahaf Shuler]

Hi Georgios,

It is not support on Mellanox PMD to read the primary process counters from a secondary process.


--Shahaf


-----Original Message-----
From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of george.dit at gmail.com
Sent: Sunday, January 8, 2017 3:38 PM
To: dev at dpdk.org
Subject: [dpdk-dev] Port stats zero when using MLX5 DPDK driver

Hi,

I have a simple setup with a machine that contains a dual port 10 GbE Intel 82599ES NIC and another dual port 100 GbE Mellanox ConnectX-4 NIC. The Intel ports are 0 and 1, while the Mellanox ones are 2 and 3.

I properly compiled DPDK 16.11 and test-pmd works just fine for all 4 ports.
Then, I ran a simple primary application that forwards packets from 0 <-->
1 and 2 <--> 3 and started dpdk-procinfo -- --stats (or --xstats) as a secondary monitoring process, while sending some traffic to all 4 ports.
The problem I see is that the statistics reported by the Mellanox NICs are always zero (Intel ports report just fine).

What is the reason behind this behavior? Is there a bug in the driver (maybe recently fixed by DPDK 17.02 rc?) or is it simply a lack of this functionality?

Thanks and best regards,

-- 
   Georgios Katsikas
   Ph.D. Student and Research Assistant
   Network Systems Lab (NSL)



       *E-Mail:*  george <george.katsikas at imdea.org>.dit at gmail.com
   *Web Site:*  http://www.di.uoa.gr/~katsikas/ <http://people.networks.imdea.org/~george_katsikas/index.html>