[dpdk-dev] [PATCH v2 11/18] net/ixgbe: parse n-tuple filter
Zhao1, Wei
wei.zhao1 at intel.com
Wed Jan 11 09:27:57 CET 2017
Hi, yigit
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Saturday, January 7, 2017 12:56 AM
> To: Zhao1, Wei <wei.zhao1 at intel.com>; dev at dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu at intel.com>
> Subject: Re: [dpdk-dev] [PATCH v2 11/18] net/ixgbe: parse n-tuple filter
>
> On 12/30/2016 7:53 AM, Wei Zhao wrote:
> > Add rule validate function and check if the rule is a n-tuple rule,
> > and get the n-tuple info.
> >
> > Signed-off-by: Wei Zhao <wei.zhao1 at intel.com>
> > Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> >
> > ---
> >
> > v2:add new error set function
> > ---
> > drivers/net/ixgbe/ixgbe_ethdev.c | 414
> > ++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 409 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > index 0de1318..198cc4b 100644
> > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > @@ -388,6 +388,24 @@ static int ixgbe_dev_udp_tunnel_port_del(struct
> rte_eth_dev *dev,
> > struct rte_eth_udp_tunnel
> *udp_tunnel);
>
> <...>
>
> > +
> > +/**
> > + * Parse the rule to see if it is a n-tuple rule.
> > + * And get the n-tuple filter info BTW.
> > + */
>
> It would be nice to comment here valid/expected pattern values
> (spec/mask/last). Otherwise it is hard to decode from code also it is good to
> document intention, so makes easy if there is any defect.
>
I will do as your suggestion in v3.
> Also valid actions.
>
> > +static int
> > +cons_parse_ntuple_filter(const struct rte_flow_attr *attr,
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[],
> > + struct rte_eth_ntuple_filter *filter,
> > + struct rte_flow_error *error)
> > +{
> > + const struct rte_flow_item *item;
> > + const struct rte_flow_action *act;
> > + const struct rte_flow_item_ipv4 *ipv4_spec;
> > + const struct rte_flow_item_ipv4 *ipv4_mask;
> > + const struct rte_flow_item_tcp *tcp_spec;
> > + const struct rte_flow_item_tcp *tcp_mask;
> > + const struct rte_flow_item_udp *udp_spec;
> > + const struct rte_flow_item_udp *udp_mask;
> > + uint32_t index;
> > +
> > + if (!pattern) {
> > + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ITEM_NUM,
> > + NULL, "NULL pattern.");
> > + return -rte_errno;
> > + }
> > +
> > + /* parse pattern */
> > + index = 0;
> > +
> > + /* the first not void item can be MAC or IPv4 */
> > + NEXT_ITEM_OF_PATTERN(item, pattern, index);
> > +
> > + if (item->type != RTE_FLOW_ITEM_TYPE_ETH &&
> > + item->type != RTE_FLOW_ITEM_TYPE_IPV4) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > + /* Skip Ethernet */
> > + if (item->type == RTE_FLOW_ITEM_TYPE_ETH) {
> > + /*Not supported last point for range*/
> > + if (item->last) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + item, "Not supported last point for range");
> > + return -rte_errno;
> > +
> > + }
> > + /* if the first item is MAC, the content should be NULL */
> > + if (item->spec || item->mask) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > + /* check if the next not void item is IPv4 */
> > + index++;
> > + NEXT_ITEM_OF_PATTERN(item, pattern, index);
> > + if (item->type != RTE_FLOW_ITEM_TYPE_IPV4) {
> > + rte_flow_error_set(error,
> > + EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
>
> Wrong indentation.
I will do as your suggestion in v3.
>
> > + return -rte_errno;
> > + }
> > + }
> > +
> > + /* get the IPv4 info */
> > + if (!item->spec || !item->mask) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Invalid ntuple mask");
> > + return -rte_errno;
> > + }
> > + /*Not supported last point for range*/
> > + if (item->last) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + item, "Not supported last point for range");
> > + return -rte_errno;
> > +
> > + }
> > +
> > + ipv4_mask = (const struct rte_flow_item_ipv4 *)item->mask;
> > + /**
> > + * Only support src & dst addresses, protocol,
> > + * others should be masked.
> > + */
> > + if (ipv4_mask->hdr.version_ihl ||
> > + ipv4_mask->hdr.type_of_service ||
> > + ipv4_mask->hdr.total_length ||
> > + ipv4_mask->hdr.packet_id ||
> > + ipv4_mask->hdr.fragment_offset ||
> > + ipv4_mask->hdr.time_to_live ||
> > + ipv4_mask->hdr.hdr_checksum) {
> > + rte_flow_error_set(error,
> > + EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > +
> > + filter->dst_ip_mask = ipv4_mask->hdr.dst_addr;
> > + filter->src_ip_mask = ipv4_mask->hdr.src_addr;
> > + filter->proto_mask = ipv4_mask->hdr.next_proto_id;
> > +
> > + ipv4_spec = (const struct rte_flow_item_ipv4 *)item->spec;
> > + filter->dst_ip = ipv4_spec->hdr.dst_addr;
> > + filter->src_ip = ipv4_spec->hdr.src_addr;
> > + filter->proto = ipv4_spec->hdr.next_proto_id;
> > +
> > + /* check if the next not void item is TCP or UDP */
> > + index++;
> > + NEXT_ITEM_OF_PATTERN(item, pattern, index);
> > + if (item->type != RTE_FLOW_ITEM_TYPE_TCP &&
> > + item->type != RTE_FLOW_ITEM_TYPE_UDP) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
>
> Sometimes meset filter before return from error, sometimes not. Is memset
> required at all?
Not all necessary, at the beginning ,filter is not config any value, so it do not need to memset .
>
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > +
> > + /* get the TCP/UDP info */
> > + if (!item->spec || !item->mask) {
>
> For example there is no memset here for filter ..
>
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Invalid ntuple mask");
> > + return -rte_errno;
> > + }
> > +
> > + /*Not supported last point for range*/
> > + if (item->last) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + item, "Not supported last point for range");
> > + return -rte_errno;
> > +
> > + }
> > +
> > + if (item->type == RTE_FLOW_ITEM_TYPE_TCP) {
> > + tcp_mask = (const struct rte_flow_item_tcp *)item->mask;
> > +
> > + /**
> > + * Only support src & dst ports, tcp flags,
> > + * others should be masked.
> > + */
> > + if (tcp_mask->hdr.sent_seq ||
> > + tcp_mask->hdr.recv_ack ||
> > + tcp_mask->hdr.data_off ||
> > + tcp_mask->hdr.rx_win ||
> > + tcp_mask->hdr.cksum ||
> > + tcp_mask->hdr.tcp_urp) {
> > + memset(filter, 0, sizeof(struct
> rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > +
> > + filter->dst_port_mask = tcp_mask->hdr.dst_port;
> > + filter->src_port_mask = tcp_mask->hdr.src_port;
> > + if (tcp_mask->hdr.tcp_flags == 0xFF) {
> > + filter->flags |= RTE_NTUPLE_FLAGS_TCP_FLAG;
> > + } else if (!tcp_mask->hdr.tcp_flags) {
> > + filter->flags &= ~RTE_NTUPLE_FLAGS_TCP_FLAG;
> > + } else {
> > + memset(filter, 0, sizeof(struct
> rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > +
> > + tcp_spec = (const struct rte_flow_item_tcp *)item->spec;
> > + filter->dst_port = tcp_spec->hdr.dst_port;
> > + filter->src_port = tcp_spec->hdr.src_port;
> > + filter->tcp_flags = tcp_spec->hdr.tcp_flags;
> > + } else {
> > + udp_mask = (const struct rte_flow_item_udp *)item->mask;
> > +
> > + /**
> > + * Only support src & dst ports,
> > + * others should be masked.
> > + */
> > + if (udp_mask->hdr.dgram_len ||
> > + udp_mask->hdr.dgram_cksum) {
> > + memset(filter, 0, sizeof(struct
> rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > +
> > + filter->dst_port_mask = udp_mask->hdr.dst_port;
> > + filter->src_port_mask = udp_mask->hdr.src_port;
> > +
> > + udp_spec = (const struct rte_flow_item_udp *)item->spec;
> > + filter->dst_port = udp_spec->hdr.dst_port;
> > + filter->src_port = udp_spec->hdr.src_port;
> > + }
> > +
> > + /* check if the next not void item is END */
> > + index++;
> > + NEXT_ITEM_OF_PATTERN(item, pattern, index);
> > + if (item->type != RTE_FLOW_ITEM_TYPE_END) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item, "Not supported by ntuple filter");
> > + return -rte_errno;
> > + }
> > +
> > + /* parse action */
> > + index = 0;
> > +
> > + if (!actions) {
>
> Although there is no harm, I would do input check at the beginning of the
> function, to not do extra work if we hit this case.
I will do as your suggestion in v3.
>
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION_NUM,
> > + NULL, "NULL action.");
> > + return -rte_errno;
> > + }
> > +
> > + /**
> > + * n-tuple only supports forwarding,
> > + * check if the first not void action is QUEUE.
> > + */
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + item, "Not supported action.");
> > + return -rte_errno;
> > + }
> > + filter->queue =
> > + ((const struct rte_flow_action_queue *)act->conf)->index;
> > +
> > + /* check if the next not void item is END */
> > + index++;
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > +
> > + /* parse attr */
> > + /* must be input direction */
>
> May be good idea to check if attr is NULL.
I will do as your suggestion in v3. Add it at the beginning of function.
>
> > + if (!attr->ingress) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> > + attr, "Only support ingress.");
> > + return -rte_errno;
> > + }
> > +
> > + /* not supported */
> > + if (attr->egress) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + attr, "Not support egress.");
> > + return -rte_errno;
> > + }
> > +
> > + if (attr->priority > 0xFFFF) {
> > + memset(filter, 0, sizeof(struct rte_eth_ntuple_filter));
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
> > + attr, "Error priority.");
> > + return -rte_errno;
> > + }
> > + filter->priority = (uint16_t)attr->priority;
>
> Should check attr->group? Do we support groups?
No , we do not.
>
> > +
> > + return 0;
> > +}
> > +
>
> <...>
More information about the dev
mailing list