[dpdk-dev] [PATCH v6 14/18] net/ixgbe: parse L2 tunnel filter

Adrien Mazarguil adrien.mazarguil at 6wind.com
Mon Jan 16 14:03:48 CET 2017


Hi,

On Fri, Jan 13, 2017 at 04:13:08PM +0800, Wei Zhao wrote:
> check if the rule is a L2 tunnel rule, and get the L2 tunnel info.
> 
> Signed-off-by: Wei Zhao <wei.zhao1 at intel.com>
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> ---
>  drivers/net/ixgbe/ixgbe_ethdev.c |   3 +-
>  drivers/net/ixgbe/ixgbe_flow.c   | 216 +++++++++++++++++++++++++++++++++++++++
>  lib/librte_ether/rte_flow.h      |  48 +++++++++
>  3 files changed, 266 insertions(+), 1 deletion(-)
[...]
> diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
> index 98084ac..7142479 100644
> --- a/lib/librte_ether/rte_flow.h
> +++ b/lib/librte_ether/rte_flow.h
> @@ -268,6 +268,20 @@ enum rte_flow_item_type {
>  	 * See struct rte_flow_item_vxlan.
>  	 */
>  	RTE_FLOW_ITEM_TYPE_VXLAN,
> +
> +	/**
> +	 * Matches a E_TAG header.
> +	 *
> +	 * See struct rte_flow_item_e_tag.
> +	 */
> +	RTE_FLOW_ITEM_TYPE_E_TAG,
> +
> +	/**
> +	 * Matches a NVGRE header.
> +	 *
> +	 * See struct rte_flow_item_nvgre.
> +	 */
> +	RTE_FLOW_ITEM_TYPE_NVGRE,
>  };
>  
>  /**
> @@ -454,6 +468,40 @@ struct rte_flow_item_vxlan {
>  };
>  
>  /**
> + * RTE_FLOW_ITEM_TYPE_E_TAG.
> + *
> + * Matches a E-tag header.
> + */
> +struct rte_flow_item_e_tag {
> +	uint16_t tpid; /**< Tag protocol identifier (0x893F). */
> +	/** E-Tag control information (E-TCI). */
> +	/**< E-PCP (3b), E-DEI (1b), ingress E-CID base (12b). */
> +	uint16_t epcp_edei_in_ecid_b;
> +	/**< Reserved (2b), GRP (2b), E-CID base (12b). */
> +	uint16_t rsvd_grp_ecid_b;
> +	uint8_t in_ecid_e; /**< Ingress E-CID ext. */
> +	uint8_t ecid_e; /**< E-CID ext. */
> +};
> +
> +/**
> + * RTE_FLOW_ITEM_TYPE_NVGRE.
> + *
> + * Matches a NVGRE header.
> + */
> +struct rte_flow_item_nvgre {
> +     /**
> +      * Checksum (1b), undefined (1b), key bit (1b), sequence number (1b),
> +      * reserved 0 (9b), version (3b).
> +      *
> +      * \c_k_s_rsvd0_ver must have value 0x2000 according to RFC 7637.
> +      */
> +	uint16_t c_k_s_rsvd0_ver;
> +	uint16_t protocol; /**< Protocol type (0x6558). */
> +	uint8_t tni[3]; /**< Virtual subnet ID. */
> +	uint8_t flow_id; /**< Flow ID. */
> +};
> +
> +/**
>   * Matching pattern item definition.
>   *
>   * A pattern is formed by stacking items starting from the lowest protocol
> -- 
> 2.5.5
> 

OK for these definitions, however API documentation
(doc/guides/prog_guide/rte_flow.rst) must be kept up to date, and it would
be great if testpmd support for these new items was added simultaneously
(changes in app/test-pmd/cmdline.c, app/test-pmd/cmdline_flow.c and
doc/guides/testpmd_app_ug/testpmd_funcs.rst).

How about putting all rte_flow changes (API & testpmd) in their own separate
patch?

You could use VLAN PCP/DEI/VID definitions as an example to expose partial
bit-fields (e.g. epcp_edei_in_ecid_b) in testpmd, see:

 1419fd5a6c9f ("app/testpmd: add protocol fields to flow command")

Now if re-spinning this series yet again is too much work, you can go ahead
with this commit as long as you do not forget to submit the rest later,
thanks.

-- 
Adrien Mazarguil
6WIND


More information about the dev mailing list