[dpdk-dev] [PATCH 02/10] linuxapp/eal_pci: get iommu class
santosh
santosh.shukla at caviumnetworks.com
Wed Jul 5 12:05:46 CEST 2017
On Wednesday 05 July 2017 01:47 PM, Maxime Coquelin wrote:
>
> On 06/08/2017 01:05 PM, Santosh Shukla wrote:
>> Get iommu class of PCI device on the bus and returns preferred iova
>> mapping mode for that bus.
>>
>> IOVA mapping scheme for linuxapp case:
>> - uio/uio_generic/vfio_noiommu --> default i.e.. (RTE_IOVA_PA)
>> - vfio --> RTE_IOVA_VA.
>> - In case of no device attached to any driver,
>> return RTE_IOVA_DC.
>>
>> Signed-off-by: Santosh Shukla <santosh.shukla at caviumnetworks.com>
>> Signed-off-by: Jerin Jacob <jerin.jacob at caviumnetworks.com>
>> ---
>> lib/librte_eal/linuxapp/eal/eal_pci.c | 38 +++++++++++++++++++++++++
>> lib/librte_eal/linuxapp/eal/eal_vfio.c | 23 +++++++++++++++
>> lib/librte_eal/linuxapp/eal/eal_vfio.h | 4 +++
>> lib/librte_eal/linuxapp/eal/rte_eal_version.map | 7 +++++
>> 4 files changed, 72 insertions(+)
>>
>> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
>> index 595622b21..2772e883e 100644
>> --- a/lib/librte_eal/linuxapp/eal/eal_pci.c
>> +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
>> @@ -45,6 +45,7 @@
>> #include "eal_filesystem.h"
>> #include "eal_private.h"
>> #include "eal_pci_init.h"
>> +#include "eal_vfio.h"
>> /**
>> * @file
>> @@ -488,6 +489,43 @@ rte_pci_scan(void)
>> return -1;
>> }
>> +/*
>> + * Get iommu class of PCI devices on the bus.
>> + * Check that those devices are attached to iommu driver.
>> + * If attached then return iova_va or iova_pa mode, else
>> + * return with dont_care(_DC).
>> + */
>> +enum rte_iova_mode
>> +rte_pci_get_iommu_class(void)
>> +{
>> + struct rte_pci_device *dev = NULL;
>> + int ret = RTE_IOVA_DC;
>> +
>> + TAILQ_FOREACH(dev, &rte_pci_bus.device_list, next) {
>> +
>> + if (dev->kdrv == RTE_KDRV_UNKNOWN ||
>> + dev->kdrv == RTE_KDRV_NONE)
>> + continue;
>> +
>> + if (dev->kdrv != RTE_KDRV_VFIO) {
>> + ret = RTE_IOVA_PA;
>> + return ret;
>> + }
>> +
>> + ret = RTE_IOVA_VA;
>> + }
>> +
>> + /* In case of iova_va, check for vfio_noiommu mode */
>> + if (ret == RTE_IOVA_VA) {
>> +#ifdef VFIO_PRESENT
>> + if (vfio_noiommu_is_enabled() == 1)
>> +#endif
>> + ret = RTE_IOVA_PA;
>> + }
>
>
>> +
>> + return ret;
>> +}
>> +
>> /* Read PCI config space. */
>> int rte_pci_read_config(const struct rte_pci_device *device,
>> void *buf, size_t len, off_t offset)
>> diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c
>> index 946df7e31..04914406f 100644
>> --- a/lib/librte_eal/linuxapp/eal/eal_vfio.c
>> +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
>> @@ -816,4 +816,27 @@ vfio_noiommu_dma_map(int __rte_unused vfio_container_fd)
>> return 0;
>> }
>> +int
>> +vfio_noiommu_is_enabled(void)
>> +{
>> +#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0)
>
> Please don't check against Kernel version, as distros may
> have backported the feature on older Kernels versions (RHEL
> for exmaple).
>
> Also, it doesn't look necessary since open should fail below
> on older kernels.
>
valid point. in v2. Thanks.
>> + return -1;
>> +#else
>> + int fd, ret, cnt __rte_unused;
>> + char c;
>> +
>> + ret = -1;
>> + fd = open(VFIO_NOIOMMU_MODE, O_RDONLY);
>> + if (fd < 0)
>> + return -1;
>> +
>> + cnt = read(fd, &c, 1);
>> + if (c == 'Y')
>> + ret = 1;
>> +
>> + close(fd);
>> + return ret;
>> +#endif
>> +}
>> +
>> #endif
>> diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h
>> index 5ff63e5d7..26ea8e119 100644
>> --- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
>> +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
>> @@ -150,6 +150,8 @@ struct vfio_config {
>> #define VFIO_NOIOMMU_GROUP_FMT "/dev/vfio/noiommu-%u"
>> #define VFIO_GET_REGION_ADDR(x) ((uint64_t) x << 40ULL)
>> #define VFIO_GET_REGION_IDX(x) (x >> 40)
>> +#define VFIO_NOIOMMU_MODE \
>> + "/sys/module/vfio/parameters/enable_unsafe_noiommu_mode"
>> /* DMA mapping function prototype.
>> * Takes VFIO container fd as a parameter.
>> @@ -210,6 +212,8 @@ int pci_vfio_is_enabled(void);
>> int vfio_mp_sync_setup(void);
>> +int vfio_noiommu_is_enabled(void);
>> +
>> #define SOCKET_REQ_CONTAINER 0x100
>> #define SOCKET_REQ_GROUP 0x200
>> #define SOCKET_CLR_GROUP 0x300
>> diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
>> index 670bab3a5..2cea7c272 100644
>> --- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map
>> +++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
>> @@ -198,3 +198,10 @@ DPDK_17.05 {
>> vfio_get_group_no;
>> } DPDK_17.02;
>> +
>> +DPDK_17.08 {
>> + global:
>> +
>> + rte_pci_get_iommu_class;
>> +
>> +} DPDK_17.05;
>>
More information about the dev
mailing list