[dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test.

Jianbo Liu jianbo.liu at linaro.org
Mon Jul 10 09:55:57 CEST 2017


On 10 July 2017 at 15:20, Herbert Guan <herbert.guan at arm.com> wrote:
> There were double-free problems in some test cases of link_bonding,
> which will cause a duplicated mbuf will be added into mempool.  After
> double-free, some new allocated mbuf will hold a same address and
> thus cause the memory corruption.
>
> Another minor issue is that in some test cases, allocated mbuf will
> not be released after test case exits.  Hopefully these leaked mbuf
> will be released by the next test case in its setup phase when
> stopping the virtual pmd ports, while this do is a memory leak of
> the exited test case.
>
> To fix above 2 issues, this patch will do:
> 1) Release virtual pmd ports' tx queue in the clean up function
>    remove_slaves_and_stop_bonded_device() of each test cases.
> 2) Do not release allocated mbufs for test bursts.  These mbufs
>    will be released in remove_slaves_and_stop_bonded_device() when
>    test case exits.
>
> Signed-off-by: Herbert Guan <herbert.guan at arm.com>
> ---
>  test/test/test_link_bonding.c | 54 +++----------------------------------------
>  1 file changed, 3 insertions(+), 51 deletions(-)
>
> diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
> index aa2a1a2..c4f5c70 100644
> --- a/test/test/test_link_bonding.c
> +++ b/test/test/test_link_bonding.c
> @@ -221,6 +221,8 @@ struct rte_fdir_conf fdir_conf = {
>
>  };
>
> +static void free_virtualpmd_tx_queue(void);
> +
>  static int
>  configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
>  {
> @@ -684,6 +686,7 @@ struct rte_fdir_conf fdir_conf = {
>  remove_slaves_and_stop_bonded_device(void)
>  {
>         /* Clean up and remove slaves from bonded device */
> +       free_virtualpmd_tx_queue();
>         while (test_params->bonded_slave_count > 0)
>                 TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
>                                 "test_remove_slave_from_bonded_device failed");
> @@ -1621,9 +1624,6 @@ struct rte_fdir_conf fdir_conf = {
>
>         /* free mbufs */
>         for (i = 0; i < MAX_PKT_BURST; i++) {
> -               if (gen_pkt_burst[i] != NULL)
> -                       rte_pktmbuf_free(gen_pkt_burst[i]);
> -
>                 if (rx_pkt_burst[i] != NULL)
>                         rte_pktmbuf_free(rx_pkt_burst[i]);
>         }
> @@ -1970,12 +1970,6 @@ struct rte_fdir_conf fdir_conf = {
>         for (i = 0; i < MAX_PKT_BURST; i++) {
>                 if (rx_pkt_burst[i] != NULL)
>                         rte_pktmbuf_free(rx_pkt_burst[i]);
> -
> -               if (gen_pkt_burst[1][i] != NULL)
> -                       rte_pktmbuf_free(gen_pkt_burst[1][i]);
> -
> -               if (gen_pkt_burst[3][i] != NULL)
> -                       rte_pktmbuf_free(gen_pkt_burst[1][i]);
>         }
>
>         /* Clean up and remove slaves from bonded device */
> @@ -2547,16 +2541,6 @@ struct rte_fdir_conf fdir_conf = {
>                         "(%d) port_stats.opackets not as expected",
>                         test_params->slave_port_ids[3]);
>
> -       /* free mbufs */
> -       for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
> -               for (j = 0; j < MAX_PKT_BURST; j++) {
> -                       if (pkt_burst[i][j] != NULL) {
> -                               rte_pktmbuf_free(pkt_burst[i][j]);
> -                               pkt_burst[i][j] = NULL;
> -                       }
> -               }
> -       }
> -
>         /* Clean up and remove slaves from bonded device */
>         return remove_slaves_and_stop_bonded_device();
>  }
> @@ -3456,16 +3440,6 @@ struct rte_fdir_conf fdir_conf = {
>                         test_params->bonded_port_id, (int)port_stats.ipackets,
>                         burst_size * 3);
>
> -       /* free mbufs allocate for rx testing */
> -       for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
> -               for (j = 0; j < MAX_PKT_BURST; j++) {
> -                       if (pkt_burst[i][j] != NULL) {
> -                               rte_pktmbuf_free(pkt_burst[i][j]);
> -                               pkt_burst[i][j] = NULL;
> -                       }
> -               }
> -       }
> -
>         /* Clean up and remove slaves from bonded device */
>         return remove_slaves_and_stop_bonded_device();
>  }
> @@ -3984,16 +3958,6 @@ struct rte_fdir_conf fdir_conf = {
>                         "(%d) port_stats.ipackets not as expected\n",
>                         test_params->bonded_port_id);
>
> -       /* free mbufs allocate for rx testing */
> -       for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
> -               for (j = 0; j < MAX_PKT_BURST; j++) {
> -                       if (pkt_burst[i][j] != NULL) {
> -                               rte_pktmbuf_free(pkt_burst[i][j]);
> -                               pkt_burst[i][j] = NULL;
> -                       }
> -               }
> -       }
> -
>         /* Clean up and remove slaves from bonded device */
>         return remove_slaves_and_stop_bonded_device();
>  }
> @@ -4527,18 +4491,6 @@ struct rte_fdir_conf fdir_conf = {
>                         "(%d) port_stats.ipackets not as expected\n",
>                         test_params->bonded_port_id);
>
> -       /* free mbufs */
> -
> -       for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
> -               for (j = 0; j < MAX_PKT_BURST; j++) {
> -                       if (pkt_burst[i][j] != NULL) {
> -                               rte_pktmbuf_free(pkt_burst[i][j]);
> -                               pkt_burst[i][j] = NULL;
> -                       }
> -               }
> -       }
> -
> -
>         /* Clean up and remove slaves from bonded device */
>         return remove_slaves_and_stop_bonded_device();
>  }
> --
> 1.8.3.1
>

Acked-by: Jianbo Liu <jianbo.liu at linaro.org>


More information about the dev mailing list