[dpdk-dev] [PATCH] net/bonding: enable bonding pmd in ppc64le

[Ferruh Yigit]

On 6/14/2017 11:16 AM, Gowrishankar wrote:
> From: Gowrishankar Muthukrishnan <gowrishankar.m at linux.vnet.ibm.com>
> 
> Earlier bonding pmd was disabled in default config for ppc64le. Same has
> been verified, with active-backup mode for an instance (to bond two VFs in each
> phy port):
> 
> testpmd-bonding-cmd.txt:
> create bonded device 1 0
> create bonded device 1 0
> add bonding slave 0 4
> add bonding slave 1 4
> add bonding slave 2 5
> add bonding slave 3 5
> set bonding primary 0 4
> set bonding primary 2 5
> port start 4
> port start 5
> show bonding config 4
> show bonding config 5
> set portlist 4,5
> 
> ./ppc_64-power8-linuxapp-gcc/app/testpmd -l 0,8,16
>   -b 0002:01:00.0 -b 0002:01:00.1
>   --socket-mem 512,512
>   -- -i --cmdline-file=../testpmd-bonding-cmd.txt
> 
> EAL: PCI device 0002:01:00.0 on NUMA socket 1
> EAL:   Device is blacklisted, not initializing
> EAL: PCI device 0002:01:00.1 on NUMA socket 1
> EAL:   Device is blacklisted, not initializing
> EAL: PCI device 0002:01:00.2 on NUMA socket 1
> EAL:   probe driver: 15b3:1014 net_mlx5
> PMD: net_mlx5: PCI information matches, using device "mlx5_2" (SR-IOV: true, MPS: false)
> PMD: net_mlx5: 1 port(s) detected
> PMD: net_mlx5: MPS is disabled
> PMD: net_mlx5: port 1 MAC address is 00:22:33:44:55:02
> EAL: PCI device 0002:01:00.3 on NUMA socket 1
> EAL:   probe driver: 15b3:1014 net_mlx5
> PMD: net_mlx5: PCI information matches, using device "mlx5_3" (SR-IOV: true, MPS: false)
> PMD: net_mlx5: 1 port(s) detected
> PMD: net_mlx5: MPS is disabled
> PMD: net_mlx5: port 1 MAC address is 00:22:33:44:55:03
> EAL: PCI device 0002:01:00.6 on NUMA socket 1
> EAL:   probe driver: 15b3:1014 net_mlx5
> PMD: net_mlx5: PCI information matches, using device "mlx5_4" (SR-IOV: true, MPS: false)
> PMD: net_mlx5: 1 port(s) detected
> PMD: net_mlx5: MPS is disabled
> PMD: net_mlx5: port 1 MAC address is 00:22:33:44:55:06
> EAL: PCI device 0002:01:00.7 on NUMA socket 1
> EAL:   probe driver: 15b3:1014 net_mlx5
> PMD: net_mlx5: PCI information matches, using device "mlx5_5" (SR-IOV: true, MPS: false)
> PMD: net_mlx5: 1 port(s) detected
> PMD: net_mlx5: MPS is disabled
> PMD: net_mlx5: port 1 MAC address is 00:22:33:44:55:07
> Interactive-mode selected
> CLI commands to be read from ../testpmd-bonding-cmd.txt
> USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=163456, size=2176, socket=0
> USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=163456, size=2176, socket=1
> Configuring Port 0 (socket 1)
> PMD: net_mlx5: 0x33518f80: TX queues number update: 0 -> 1
> PMD: net_mlx5: 0x33518f80: RX queues number update: 0 -> 1
> Port 0: 00:22:33:44:55:02
> Configuring Port 1 (socket 1)
> PMD: net_mlx5: 0x3351d000: TX queues number update: 0 -> 1
> PMD: net_mlx5: 0x3351d000: RX queues number update: 0 -> 1
> Port 1: 00:22:33:44:55:03
> Configuring Port 2 (socket 1)
> PMD: net_mlx5: 0x33521080: TX queues number update: 0 -> 1
> PMD: net_mlx5: 0x33521080: RX queues number update: 0 -> 1
> Port 2: 00:22:33:44:55:06
> Configuring Port 3 (socket 1)
> PMD: net_mlx5: 0x33525100: TX queues number update: 0 -> 1
> PMD: net_mlx5: 0x33525100: RX queues number update: 0 -> 1
> Port 3: 00:22:33:44:55:07
> Checking link statuses...
> Done
> EAL: Initializing pmd_bond for net_bond_testpmd_0
> EAL: Create bonded device net_bond_testpmd_0 on port 4 in mode 1 on socket 0.
> Created new bonded device net_bond_testpmd_0 on (port 4).
> EAL: Initializing pmd_bond for net_bond_testpmd_1
> EAL: Create bonded device net_bond_testpmd_1 on port 5 in mode 1 on socket 0.
> Created new bonded device net_bond_testpmd_1 on (port 5).
> Configuring Port 4 (socket 0)
> 
> Port 4: LSC event
> Port 4: 00:22:33:44:55:02
> Checking link statuses...
> Done
> Configuring Port 5 (socket 0)
> 
> Port 5: LSC event
> Port 5: 00:22:33:44:55:06
> Checking link statuses...
> Done
>     Bonding mode: 1
>     Slaves (2): [0 1]
>     Active Slaves (2): [0 1]
>     Primary: [0]
>     Bonding mode: 1
>     Slaves (2): [2 3]
>     Active Slaves (2): [2 3]
>     Primary: [2]
> previous number of forwarding ports 4 - changed to number of configured ports 2
> Read CLI commands from ../testpmd-bonding-cmd.txt
> testpmd> start
> 
> Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m at linux.vnet.ibm.com>
> ---
>  config/defconfig_ppc_64-power8-linuxapp-gcc | 2 +>  1 file changed, 1 insertion(+), 1 deletion(-)

Can you please update bonding features file [1] to announce PowerPC support.

btw, I have recognized that bonding hasn't documented any feature yet,
having only "Power8" will look confusing, but hopefully we can document
more for this release.

Anyone willing to document bonding features? Declan :)

[1]
doc/guides/nics/features/bonding.ini

> 
> diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc
> index 71e4c35..4fce585 100644
> --- a/config/defconfig_ppc_64-power8-linuxapp-gcc
> +++ b/config/defconfig_ppc_64-power8-linuxapp-gcc
> @@ -51,7 +51,7 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
>  CONFIG_RTE_LIBRTE_IXGBE_PMD=n
>  CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
>  CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
> -CONFIG_RTE_LIBRTE_PMD_BOND=n
> +CONFIG_RTE_LIBRTE_PMD_BOND=y

Bonding is enabled in base config, removing this line will enable it.

>  CONFIG_RTE_LIBRTE_ENIC_PMD=n
>  CONFIG_RTE_LIBRTE_FM10K_PMD=n
>  CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
>