[dpdk-dev] [PATCH 1/6] ethdev: add descriptor status API
Olivier Matz
olivier.matz at 6wind.com
Wed Mar 1 18:19:07 CET 2017
Introduce a new API to get the status of a descriptor.
For Rx, it is almost similar to rx_descriptor_done API, except it
differentiates "used" descriptors (which are hold by the driver and not
returned to the hardware).
For Tx, it is a new API.
The descriptor_done() API, and probably the rx_queue_count() API could
be replaced by this new API as soon as it is implemented on all PMDs.
Signed-off-by: Olivier Matz <olivier.matz at 6wind.com>
---
lib/librte_ether/rte_ethdev.h | 86 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 97f3e2d..9ac9c61 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1179,6 +1179,14 @@ typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
/**< @internal Check DD bit of specific RX descriptor */
+typedef int (*eth_rx_descriptor_status_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id, uint16_t offset);
+/**< @internal Check the status of a Rx descriptor */
+
+typedef int (*eth_tx_descriptor_status_t)(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id, uint16_t offset);
+/**< @internal Check the status of a Tx descriptor */
+
typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev,
char *fw_version, size_t fw_size);
/**< @internal Get firmware information of an Ethernet device. */
@@ -1483,6 +1491,10 @@ struct eth_dev_ops {
eth_queue_release_t rx_queue_release; /**< Release RX queue. */
eth_rx_queue_count_t rx_queue_count;/**< Get Rx queue count. */
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */
+ eth_rx_descriptor_status_t rx_descriptor_status;
+ /**< Check the status of a Rx descriptor. */
+ eth_tx_descriptor_status_t tx_descriptor_status;
+ /**< Check the status of a Tx descriptor. */
eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */
@@ -2768,6 +2780,80 @@ rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
dev->data->rx_queues[queue_id], offset);
}
+#define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */
+#define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */
+#define RTE_ETH_RX_DESC_USED 2 /**< Desc used by driver. */
+
+/**
+ * Check the status of a Rx descriptor in the queue
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The Rx queue identifier on this port.
+ * @param offset
+ * The offset of the descriptor starting from tail (0 is the next
+ * packet to be received by the driver).
+ *
+ * @return
+ * - (RTE_ETH_DESC_AVAIL): Descriptor is available for the hardware to
+ * receive a packet.
+ * - (RTE_ETH_DESC_DONE): Descriptor is done, it is filled by hw, but
+ * not yet processed by the driver (i.e. in the receive queue).
+ * - (RTE_ETH_DESC_USED): Descriptor is unavailable (hold by driver,
+ * not yet returned to hw).
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) bad descriptor offset.
+ * - (-ENOTSUP) if the device does not support this function.
+ */
+static inline int
+rte_eth_rx_descriptor_status(uint8_t port_id, uint16_t queue_id,
+ uint16_t offset)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_status, -ENOTSUP);
+
+ return (*dev->dev_ops->rx_descriptor_status)(dev, queue_id, offset);
+}
+
+#define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled by pmd for hw, waiting xmit. */
+#define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */
+
+/**
+ * Check the status of a Tx descriptor in the queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The Tx queue identifier on this port.
+ * @param offset
+ * The offset of the descriptor starting from tail (0 is the place where
+ * the next packet will be send).
+ *
+ * @return
+ * - (RTE_ETH_DESC_FULL) Descriptor is being processed by the hw, i.e.
+ * in the transmit queue.
+ * - (RTE_ETH_DESC_DONE) Hardware is done with this descriptor, it can be
+ * reused by the driver.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) bad descriptor offset.
+ * - (-ENOTSUP) if the device does not support this function.
+ */
+static inline int rte_eth_tx_descriptor_status(uint8_t port_id,
+ uint16_t queue_id, uint16_t offset)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_descriptor_status, -ENOTSUP);
+
+ return (*dev->dev_ops->tx_descriptor_status)(dev, queue_id, offset);
+}
+
/**
* Send a burst of output packets on a transmit queue of an Ethernet device.
*
--
2.8.1
More information about the dev
mailing list