[dpdk-dev] [PATCH 1/4] net/tap: move private elements to external header

Wiles, Keith keith.wiles at intel.com
Fri Mar 3 16:38:11 CET 2017


> On Mar 3, 2017, at 4:45 AM, Pascal Mazon <pascal.mazon at 6wind.com> wrote:
> 
> In the next patch, access to struct pmd_internals will be necessary in
> tap_flow.c to store the flows.
> 
> Signed-off-by: Pascal Mazon <pascal.mazon at 6wind.com>
> Acked-by: Olga Shern <olgas at mellanox.com>
> ---
> drivers/net/tap/Makefile      |  1 +
> drivers/net/tap/rte_eth_tap.c | 34 ++------------------
> drivers/net/tap/tap.h         | 73 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 76 insertions(+), 32 deletions(-)
> create mode 100644 drivers/net/tap/tap.h
> 
> diff --git a/drivers/net/tap/Makefile b/drivers/net/tap/Makefile
> index e18f30c56f52..bdbe69e62a4e 100644
> --- a/drivers/net/tap/Makefile
> +++ b/drivers/net/tap/Makefile
> @@ -40,6 +40,7 @@ EXPORT_MAP := rte_pmd_tap_version.map
> LIBABIVER := 1
> 
> CFLAGS += -O3
> +CFLAGS += -I$(SRCDIR)
> CFLAGS += $(WERROR_FLAGS)
> 
> #
> diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
> index 3fd057225ab3..fa57d645f3b1 100644
> --- a/drivers/net/tap/rte_eth_tap.c
> +++ b/drivers/net/tap/rte_eth_tap.c
> @@ -51,6 +51,8 @@
> #include <linux/if_ether.h>
> #include <fcntl.h>
> 
> +#include <tap.h>
> +
> /* Linux based path to the TUN device */
> #define TUN_TAP_DEV_PATH        "/dev/net/tun"
> #define DEFAULT_TAP_NAME        "dtap"
> @@ -83,38 +85,6 @@ static struct rte_eth_link pmd_link = {
> 	.link_autoneg = ETH_LINK_SPEED_AUTONEG
> };
> 
> -struct pkt_stats {
> -	uint64_t opackets;		/* Number of output packets */
> -	uint64_t ipackets;		/* Number of input packets */
> -	uint64_t obytes;		/* Number of bytes on output */
> -	uint64_t ibytes;		/* Number of bytes on input */
> -	uint64_t errs;			/* Number of error packets */
> -};
> -
> -struct rx_queue {
> -	struct rte_mempool *mp;		/* Mempool for RX packets */
> -	uint16_t in_port;		/* Port ID */
> -	int fd;
> -
> -	struct pkt_stats stats;		/* Stats for this RX queue */
> -};
> -
> -struct tx_queue {
> -	int fd;
> -	struct pkt_stats stats;		/* Stats for this TX queue */
> -};
> -
> -struct pmd_internals {
> -	char name[RTE_ETH_NAME_MAX_LEN];	/* Internal Tap device name */
> -	uint16_t nb_queues;		/* Number of queues supported */
> -	struct ether_addr eth_addr;	/* Mac address of the device port */
> -
> -	int if_index;			/* IF_INDEX for the port */
> -
> -	struct rx_queue rxq[RTE_PMD_TAP_MAX_QUEUES];	/* List of RX queues */
> -	struct tx_queue txq[RTE_PMD_TAP_MAX_QUEUES];	/* List of TX queues */
> -};
> -
> /* Tun/Tap allocation routine
>  *
>  * name is the number of the interface to use, unless NULL to take the host
> diff --git a/drivers/net/tap/tap.h b/drivers/net/tap/tap.h
> new file mode 100644
> index 000000000000..88f62b895feb
> --- /dev/null
> +++ b/drivers/net/tap/tap.h
> @@ -0,0 +1,73 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright 2017 6WIND S.A.
> + *   Copyright 2017 Mellanox.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of 6WIND S.A. nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _TAP_H_
> +#define _TAP_H_
> +
> +#include <inttypes.h>
> +
> +#include <rte_ethdev.h>
> +#include <rte_ether.h>
> +
> +#define RTE_PMD_TAP_MAX_QUEUES 16
> +
> +struct pkt_stats {
> +	uint64_t opackets; /* Number of output packets */
> +	uint64_t ipackets; /* Number of input packets */
> +	uint64_t obytes; /* Number of bytes on output */
> +	uint64_t ibytes; /* Number of bytes on input */
> +	uint64_t errs; /* Number of error packets */
> +};
> +
> +struct rx_queue {
> +	struct rte_mempool *mp; /* Mempool for RX packets */
> +	uint16_t in_port; /* Port ID */
> +	int fd;
> +	struct pkt_stats stats; /* Stats for this RX queue */
> +};
> +
> +struct tx_queue {
> +	int fd;
> +	struct pkt_stats stats; /* Stats for this TX queue */
> +};
> +
> +struct pmd_internals {
> +	char name[RTE_ETH_NAME_MAX_LEN]; /* Internal Tap device name */
> +	uint16_t nb_queues; /* Number of queues supported */
> +	struct ether_addr eth_addr; /* Mac address of the device port */
> +	int if_index; /* IF_INDEX for the port */
> +	struct rx_queue rxq[RTE_PMD_TAP_MAX_QUEUES]; /* List of RX queues */
> +	struct tx_queue txq[RTE_PMD_TAP_MAX_QUEUES]; /* List of TX queues */
> +};

I guess I am going to be a bit picky here on the formatting. Moving the code from .c to .h you compress a lot of white space out and now I think it is very hard to read. Can you add back some of the white space for readability.

> +
> +#endif /* _TAP_H_ */
> -- 
> 2.8.0.rc0
> 

Regards,
Keith



More information about the dev mailing list