[dpdk-dev] [PATCH v3] eal: sPAPR IOMMU support in pci probing for vfio-pci in ppc64le

Burakov, Anatoly anatoly.burakov at intel.com
Mon Mar 6 17:46:27 CET 2017


> From: Gowrishankar [mailto:gowrishankar.m at linux.vnet.ibm.com]
> Sent: Monday, March 6, 2017 3:04 PM
> To: dev at dpdk.org
> Cc: Chao Zhu <chaozhu at linux.vnet.ibm.com>; Burakov, Anatoly
> <anatoly.burakov at intel.com>; Thomas Monjalon
> <thomas.monjalon at 6wind.com>; Gowrishankar Muthukrishnan
> <gowrishankar.m at linux.vnet.ibm.com>
> Subject: [PATCH v3] eal: sPAPR IOMMU support in pci probing for vfio-pci in
> ppc64le
> 
> From: Gowrishankar Muthukrishnan <gowrishankar.m at linux.vnet.ibm.com>
> 
> Below changes adds pci probing support for vfio-pci devices in power8.
> 
> v3 - better validation for kernel not implementing few iocts called
> v2 - kernel version checked and doc updated
> 
> Signed-off-by: Gowrishankar Muthukrishnan
> <gowrishankar.m at linux.vnet.ibm.com>
> ---
>  doc/guides/rel_notes/release_17_05.rst |  4 ++
> lib/librte_eal/linuxapp/eal/eal_vfio.c | 90
> ++++++++++++++++++++++++++++++++++
>  lib/librte_eal/linuxapp/eal/eal_vfio.h | 25 ++++++++++
>  3 files changed, 119 insertions(+)
> 
> diff --git a/doc/guides/rel_notes/release_17_05.rst
> b/doc/guides/rel_notes/release_17_05.rst
> index e25ea9f..4b90036 100644
> --- a/doc/guides/rel_notes/release_17_05.rst
> +++ b/doc/guides/rel_notes/release_17_05.rst
> @@ -42,6 +42,10 @@ New Features
> 
> =========================================================
> 
> 
> +* **Added powerpc support in pci probing for vfio-pci devices.**
> +
> +  sPAPR IOMMU based pci probing enabled for vfio-pci devices.
> +
>  Resolved Issues
>  ---------------
> 
> diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c
> b/lib/librte_eal/linuxapp/eal/eal_vfio.c
> index 702f7a2..9377a66 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_vfio.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
> @@ -50,12 +50,15 @@
>  static struct vfio_config vfio_cfg;
> 
>  static int vfio_type1_dma_map(int);
> +static int vfio_spapr_dma_map(int);
>  static int vfio_noiommu_dma_map(int);
> 
>  /* IOMMU types we support */
>  static const struct vfio_iommu_type iommu_types[] = {
>  	/* x86 IOMMU, otherwise known as type 1 */
>  	{ RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
> +	/* ppc64 IOMMU, otherwise known as spapr */
> +	{ RTE_VFIO_SPAPR, "sPAPR", &vfio_spapr_dma_map},
>  	/* IOMMU-less mode */
>  	{ RTE_VFIO_NOIOMMU, "No-IOMMU",
> &vfio_noiommu_dma_map},  }; @@ -540,6 +543,93 @@ int
> vfio_setup_device(const char *sysfs_base, const char *dev_addr,  }
> 
>  static int
> +vfio_spapr_dma_map(int vfio_container_fd) {
> +	const struct rte_memseg *ms = rte_eal_get_physmem_layout();
> +	int i, ret;
> +
> +	struct vfio_iommu_spapr_register_memory reg = {
> +		.argsz = sizeof(reg),
> +		.flags = 0
> +	};
> +	struct vfio_iommu_spapr_tce_info info = {
> +		.argsz = sizeof(info),
> +	};
> +	struct vfio_iommu_spapr_tce_create create = {
> +		.argsz = sizeof(create),
> +	};
> +	struct vfio_iommu_spapr_tce_remove remove = {
> +		.argsz = sizeof(remove),
> +	};
> +
> +	/* query spapr iommu info */
> +	ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO,
> &info);
> +	if (ret) {
> +		RTE_LOG(ERR, EAL, "  cannot get iommu info, "
> +				"error %i (%s)\n", errno, strerror(errno));
> +		return -1;
> +	}
> +
> +	/* remove default DMA of 32 bit window */
> +	remove.start_addr = info.dma32_window_start;
> +	ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_REMOVE,
> &remove);
> +	if (ret) {
> +		RTE_LOG(ERR, EAL, "  cannot remove default DMA window, "
> +				"error %i (%s)\n", errno, strerror(errno));
> +		return -1;
> +	}
> +
> +	/* calculate window size based on number of hugepages configured
> */
> +	create.window_size = rte_eal_get_physmem_size();
> +	create.page_shift = __builtin_ctzll(ms->hugepage_sz);
> +	create.levels = 2;
> +
> +	ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_CREATE,
> &create);
> +	if (ret) {
> +		RTE_LOG(ERR, EAL, "  cannot create new DMA window, "
> +				"error %i (%s)\n", errno, strerror(errno));
> +		return -1;
> +	}
> +
> +	/* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */
> +	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
> +		struct vfio_iommu_type1_dma_map dma_map;
> +
> +		if (ms[i].addr == NULL)
> +			break;
> +
> +		reg.vaddr = (uintptr_t) ms[i].addr;
> +		reg.size = ms[i].len;
> +		ret = ioctl(vfio_container_fd,
> +			VFIO_IOMMU_SPAPR_REGISTER_MEMORY, &reg);
> +		if (ret) {
> +			RTE_LOG(ERR, EAL, "  cannot register vaddr for
> IOMMU, "
> +				"error %i (%s)\n", errno, strerror(errno));
> +			return -1;
> +		}
> +
> +		memset(&dma_map, 0, sizeof(dma_map));
> +		dma_map.argsz = sizeof(struct
> vfio_iommu_type1_dma_map);
> +		dma_map.vaddr = ms[i].addr_64;
> +		dma_map.size = ms[i].len;
> +		dma_map.iova = ms[i].phys_addr;
> +		dma_map.flags = VFIO_DMA_MAP_FLAG_READ |
> +				 VFIO_DMA_MAP_FLAG_WRITE;
> +
> +		ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA,
> &dma_map);
> +
> +		if (ret) {
> +			RTE_LOG(ERR, EAL, "  cannot set up DMA remapping,
> "
> +				"error %i (%s)\n", errno, strerror(errno));
> +			return -1;
> +		}
> +
> +	}
> +
> +	return 0;
> +}
> +
> +static int
>  vfio_noiommu_dma_map(int __rte_unused vfio_container_fd)  {
>  	/* No-IOMMU mode does not need DMA mapping */ diff --git
> a/lib/librte_eal/linuxapp/eal/eal_vfio.h
> b/lib/librte_eal/linuxapp/eal/eal_vfio.h
> index 29f7f3e..ac31a4f 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
> +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
> @@ -54,6 +54,31 @@
> 
>  #define RTE_VFIO_TYPE1 VFIO_TYPE1_IOMMU
> 
> +#ifndef VFIO_SPAPR_TCE_v2_IOMMU
> +#define RTE_VFIO_SPAPR 7
> +#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE,
> VFIO_BASE + 17)
> +#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE +
> 19)
> +#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE
> + 20)
> +struct vfio_iommu_spapr_register_memory {
> +	uint32_t argsz;
> +	uint32_t flags;
> +	uint64_t vaddr;
> +	uint64_t size;
> +};
> +struct vfio_iommu_spapr_tce_create {
> +	uint32_t argsz;
> +	uint32_t page_shift;
> +	uint64_t window_size;
> +	uint32_t levels;
> +};
> +struct vfio_iommu_spapr_tce_remove {
> +	uint32_t argsz;
> +	uint64_t start_addr;
> +};
> +#else
> +#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU #endif
> +
>  #if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0)  #define
> RTE_VFIO_NOIOMMU 8  #else
> --
> 1.9.1

The commit message will probably need to be edited to not include the change notes (v2-v3 stuff), but as for commit contents,

Acked-by: Anatoly  Burakov <anatoly.burakov at intel.com>




More information about the dev mailing list