[dpdk-dev] [PATCH v2] doc: relocate i40e known issues
Qiming Yang
qiming.yang at intel.com
Tue Mar 28 04:28:56 CEST 2017
This patch moved i40e related known issues from doc/guides/rel_notes/
known_issues.rst to doc/guides/nics/i40e.rst, makes us easy
to track the issue about i40e.
Signed-off-by: Qiming Yang <qiming.yang at intel.com>
---
doc/guides/nics/i40e.rst | 26 ++++++++++++++
doc/guides/rel_notes/known_issues.rst | 65 -----------------------------------
2 files changed, 26 insertions(+), 65 deletions(-)
diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 043de34..9d31565 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -417,6 +417,32 @@ or greater.
Limitations or Known issues
---------------------------
+Cannot set link speed on Intel® 40G Ethernet controller
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+On Intel® 40G Ethernet Controller you cannot set the link to specific
+speed. The link speed cannot be changed forcibly, though it can be
+configured by application.
+
+I40e VF may not receive packets in the promiscuous mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Promiscuous mode is not supported by the DPDK i40e VF driver when using
+the i40e Linux kernel driver as host driver. The i40e VF does not receive
+packets when the destination MAC address is unknown. Use a explicit
+destination MAC address that matches the VF can avoid this problem.
+
+uio pci generic module bind failed in X710/XL710/XXV710
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When use ``--bind=uio_pci_generic``, the ``uio_pci_generic`` module probes
+device and check the Interrupt Status bit. Since it is not supported by
+X710/XL710/XXV710, it return a *failed* value. The statement that these
+products don’t support INTx masking, is indicated in the related `linux kernel
+commit <https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/
+commit/drivers/pci/quirks.c?id=8bcf4525c5d43306c5fd07e132bc8650e3491aec>`_.
+Do not bind the ``uio_pci_generic`` module in X710/XL710/XXV710 NICs.
+
MPLS packet classification on X710/XL710
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/guides/rel_notes/known_issues.rst b/doc/guides/rel_notes/known_issues.rst
index f149ac7..5b702c5 100644
--- a/doc/guides/rel_notes/known_issues.rst
+++ b/doc/guides/rel_notes/known_issues.rst
@@ -513,25 +513,6 @@ Ethertype filter could receive other packets (non-assigned) in Niantic
Poll Mode Driver (PMD).
-Cannot set link speed on Intel® 40G Ethernet controller
--------------------------------------------------------
-
-**Description**:
- On Intel® 40G Ethernet Controller you cannot set the link to specific speed.
-
-**Implication**:
- The link speed cannot be changed forcibly, though it can be configured by application.
-
-**Resolution/Workaround**:
- None
-
-**Affected Environment/Platform**:
- All.
-
-**Driver/Module**:
- Poll Mode Driver (PMD).
-
-
Devices bound to igb_uio with VT-d enabled do not work on Linux kernel 3.15-3.17
--------------------------------------------------------------------------------
@@ -622,52 +603,6 @@ The last EAL argument is replaced by the program name in argv[]
Environment Abstraction Layer (EAL).
-I40e VF may not receive packets in the promiscuous mode
--------------------------------------------------------
-
-**Description**:
- Promiscuous mode is not supported by the DPDK i40e VF driver when using the
- i40e Linux kernel driver as host driver.
-
-**Implication**:
- The i40e VF does not receive packets when the destination MAC address is unknown.
-
-**Resolution/Workaround**:
- Use a explicit destination MAC address that matches the VF.
-
-**Affected Environment/Platform**:
- All.
-
-**Driver/Module**:
- Poll Mode Driver (PMD).
-
-
-uio pci generic module bind failed in X710/XL710/XXV710
--------------------------------------------------------
-
-**Description**:
- The ``uio_pci_generic`` module is not supported by XL710, since the errata of XL710
- states that the Interrupt Status bit is not implemented. The errata is the item #71
- from the `xl710 controller spec
- <http://www.intel.com/content/www/us/en/embedded/products/networking/xl710-10-40-controller-spec-update.html>`_.
- The hw limitation is the same as other X710/XXV710 NICs.
-
-**Implication**:
- When use ``--bind=uio_pci_generic``, the ``uio_pci_generic`` module probes device and check the Interrupt
- Status bit. Since it is not supported by X710/XL710/XXV710, it return a *failed* value. The statement
- that these products don’t support INTx masking, is indicated in the related `linux kernel commit
- <https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/drivers/pci/quirks.c?id=8bcf4525c5d43306c5fd07e132bc8650e3491aec>`_.
-
-**Resolution/Workaround**:
- Do not bind the ``uio_pci_generic`` module in X710/XL710/XXV710 NICs.
-
-**Affected Environment/Platform**:
- All.
-
-**Driver/Module**:
- Poll Mode Driver (PMD).
-
-
virtio tx_burst() function cannot do TSO on shared packets
----------------------------------------------------------
--
2.7.4
More information about the dev
mailing list