[dpdk-dev] [PATCH] net/mlx5: implement drop action in hardware classifier
Nélio Laranjeiro
nelio.laranjeiro at 6wind.com
Fri May 26 08:56:31 CEST 2017
Shachar,
Please see the few comments above,
On Thu, May 25, 2017 at 01:05:58PM +0000, Shachar Beiser wrote:
> The current drop action is implemented as a queue tail drop,
> requiring to instantiate multiple WQs to maintain high drop rate.
> This commit, implements the drop action in hardware classifier.
> This enables to reduce the amount of contexts needed for the drop,
> without affecting the drop rate.
>
> Signed-off-by: Shachar Beiser <shacharbe at mellanox.com>
> ---
> drivers/net/mlx5/Makefile | 5 ++++
> drivers/net/mlx5/mlx5_flow.c | 56 ++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 61 insertions(+)
>
> diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> index c079959..daf8013 100644
> --- a/drivers/net/mlx5/Makefile
> +++ b/drivers/net/mlx5/Makefile
> @@ -101,6 +101,11 @@ mlx5_autoconf.h.new: FORCE
> mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
> $Q $(RM) -f -- '$@'
> $Q sh -- '$<' '$@' \
> + HAVE_VERBS_IBV_EXP_FLOW_SPEC_ACTION_DROP \
> + infiniband/verbs_exp.h \
> + enum IBV_EXP_FLOW_SPEC_ACTION_DROP \
> + $(AUTOCONF_OUTPUT)
> + $Q sh -- '$<' '$@' \
> HAVE_VERBS_IBV_EXP_CQ_COMPRESSED_CQE \
> infiniband/verbs_exp.h \
> enum IBV_EXP_CQ_COMPRESSED_CQE \
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index adcbe3f..d132d85 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -994,6 +994,12 @@ struct mlx5_flow_action {
> {
> struct rte_flow *rte_flow;
>
> +#ifdef HAVE_VERBS_IBV_EXP_FLOW_SPEC_ACTION_DROP
> +
> + struct ibv_exp_flow_spec_action_drop *drop;
> +
> + unsigned int size = sizeof(struct ibv_exp_flow_spec_action_drop);
> +#endif
Remove those extra lines, it does not respect the file coding style.
> assert(priv->pd);
> assert(priv->ctx);
> rte_flow = rte_calloc(__func__, 1, sizeof(*rte_flow), 0);
> @@ -1007,6 +1013,15 @@ struct mlx5_flow_action {
> rte_flow->qp = priv->flow_drop_queue->qp;
> if (!priv->started)
> return rte_flow;
> +#ifdef HAVE_VERBS_IBV_EXP_FLOW_SPEC_ACTION_DROP
> + drop = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
> + *drop = (struct ibv_exp_flow_spec_action_drop){
> + .type = IBV_EXP_FLOW_SPEC_ACTION_DROP,
> + .size = size,
> + };
> + ++flow->ibv_attr->num_of_specs;
> + flow->offset += sizeof(struct ibv_exp_flow_spec_action_drop);
> +#endif
> rte_flow->ibv_flow = ibv_exp_create_flow(rte_flow->qp,
> rte_flow->ibv_attr);
> if (!rte_flow->ibv_flow) {
> @@ -1370,8 +1385,10 @@ struct rte_flow *
> priv_flow_create_drop_queue(struct priv *priv)
> {
> struct rte_flow_drop *fdq = NULL;
> +#ifndef HAVE_VERBS_IBV_EXP_FLOW_SPEC_ACTION_DROP
> unsigned int i;
>
> +#endif
The empty line should be after the #endif not before.
> assert(priv->pd);
> assert(priv->ctx);
> fdq = rte_calloc(__func__, 1, sizeof(*fdq), 0);
> @@ -1387,6 +1404,7 @@ struct rte_flow *
> WARN("cannot allocate CQ for drop queue");
> goto error;
> }
> +#ifndef HAVE_VERBS_IBV_EXP_FLOW_SPEC_ACTION_DROP
> for (i = 0; i != MLX5_DROP_WQ_N; ++i) {
> fdq->wqs[i] = ibv_exp_create_wq(priv->ctx,
> &(struct ibv_exp_wq_init_attr){
> @@ -1412,6 +1430,31 @@ struct rte_flow *
> WARN("cannot allocate indirection table for drop queue");
> goto error;
> }
> +#else
> + fdq->wqs[0] = ibv_exp_create_wq(priv->ctx,
> + &(struct ibv_exp_wq_init_attr){
> + .wq_type = IBV_EXP_WQT_RQ,
> + .max_recv_wr = 1,
> + .max_recv_sge = 1,
> + .pd = priv->pd,
> + .cq = fdq->cq,
> + });
> + if (!fdq->wqs[0]) {
> + WARN("cannot allocate WQ for drop queue");
> + goto error;
> + }
>From here...
> + fdq->ind_table = ibv_exp_create_rwq_ind_table(priv->ctx,
> + &(struct ibv_exp_rwq_ind_table_init_attr){
> + .pd = priv->pd,
> + .log_ind_tbl_size = 0,
> + .ind_tbl = fdq->wqs,
> + .comp_mask = 0,
> + });
> + if (!fdq->ind_table) {
> + WARN("cannot allocate indirection table for drop queue");
> + goto error;
> + }
> +#endif
>[...]
To this point, the code is copy/paste from the block above, it should
not be present. Please keep the diff as small as possible.
Thanks,
--
Nélio Laranjeiro
6WIND
More information about the dev
mailing list