[dpdk-dev] [PATCH 1/7] ethdev: add support of NIC restoration
Wei Dai
wei.dai at intel.com
Sat May 27 10:22:03 CEST 2017
The steps of NIC restoration process include following items in order:
dev_stop, dev_uninit, dev_init, dev_configure with stored configuration,
setup each Rx and Tx queue with previous configurations and dev_start.
Signed-off-by: Wei Dai <wei.dai at intel.com>
---
lib/librte_ether/rte_ethdev.c | 102 ++++++++++++++++++++++++++++++++-
lib/librte_ether/rte_ethdev.h | 36 ++++++++++++
lib/librte_ether/rte_ether_version.map | 6 ++
3 files changed, 142 insertions(+), 2 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 83898a8..a5a9519 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -795,17 +795,39 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
/*
* Setup new number of RX/TX queues and reconfigure device.
*/
+ if (dev->data->rxq_conf == NULL) {
+ dev->data->rxq_conf = rte_zmalloc("ethdev->rxq_conf",
+ sizeof(struct rte_eth_rx_queue_conf) * nb_rx_q,
+ RTE_CACHE_LINE_SIZE);
+ if (dev->data->rxq_conf == NULL)
+ return -ENOMEM;
+ }
+
diag = rte_eth_dev_rx_queue_config(dev, nb_rx_q);
if (diag != 0) {
RTE_PMD_DEBUG_TRACE("port%d rte_eth_dev_rx_queue_config = %d\n",
port_id, diag);
+ rte_free(dev->data->rxq_conf);
return diag;
}
+ if (dev->data->txq_conf == NULL) {
+ dev->data->txq_conf = rte_zmalloc("ethdev->txq_conf",
+ sizeof(struct rte_eth_tx_queue_conf) * nb_tx_q,
+ RTE_CACHE_LINE_SIZE);
+ if (dev->data->txq_conf == NULL) {
+ rte_free(dev->data->rxq_conf);
+ rte_eth_dev_rx_queue_config(dev, 0);
+ return -ENOMEM;
+ }
+ }
+
diag = rte_eth_dev_tx_queue_config(dev, nb_tx_q);
if (diag != 0) {
RTE_PMD_DEBUG_TRACE("port%d rte_eth_dev_tx_queue_config = %d\n",
port_id, diag);
+ rte_free(dev->data->rxq_conf);
+ rte_free(dev->data->txq_conf);
rte_eth_dev_rx_queue_config(dev, 0);
return diag;
}
@@ -814,6 +836,8 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
if (diag != 0) {
RTE_PMD_DEBUG_TRACE("port%d dev_configure = %d\n",
port_id, diag);
+ rte_free(dev->data->rxq_conf);
+ rte_free(dev->data->txq_conf);
rte_eth_dev_rx_queue_config(dev, 0);
rte_eth_dev_tx_queue_config(dev, 0);
return diag;
@@ -1005,6 +1029,7 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
void **rxq;
+ struct rte_eth_rx_queue_conf *rxq_conf;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
@@ -1080,6 +1105,12 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
if (!dev->data->min_rx_buf_size ||
dev->data->min_rx_buf_size > mbp_buf_size)
dev->data->min_rx_buf_size = mbp_buf_size;
+
+ rxq_conf = &dev->data->rxq_conf[rx_queue_id];
+ rxq_conf->nb_rx_desc = nb_rx_desc;
+ rxq_conf->socket_id = socket_id;
+ rxq_conf->rx_conf = *rx_conf;
+ rxq_conf->mp = mp;
}
return ret;
@@ -1093,6 +1124,8 @@ rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
void **txq;
+ int ret;
+ struct rte_eth_tx_queue_conf *txq_conf;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
@@ -1136,8 +1169,16 @@ rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
if (tx_conf == NULL)
tx_conf = &dev_info.default_txconf;
- return (*dev->dev_ops->tx_queue_setup)(dev, tx_queue_id, nb_tx_desc,
- socket_id, tx_conf);
+ ret = (*dev->dev_ops->tx_queue_setup)(dev, tx_queue_id, nb_tx_desc,
+ socket_id, tx_conf);
+ if (!ret) {
+ txq_conf = &dev->data->txq_conf[tx_queue_id];
+ txq_conf->nb_tx_desc = nb_tx_desc;
+ txq_conf->socket_id = socket_id;
+ txq_conf->tx_conf = *tx_conf;
+ }
+
+ return ret;
}
void
@@ -3472,3 +3513,60 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
-ENOTSUP);
return (*dev->dev_ops->l2_tunnel_offload_set)(dev, l2_tunnel, mask, en);
}
+
+int
+rte_eth_dev_restore(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+ uint16_t q;
+ struct rte_eth_rx_queue_conf *rxq_conf;
+ struct rte_eth_tx_queue_conf *txq_conf;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+ dev = &rte_eth_devices[port_id];
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_uninit, -ENOTSUP);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_init, -ENOTSUP);
+
+ rte_eth_dev_stop(port_id);
+
+ ret = dev->dev_ops->dev_uninit(dev);
+ if (ret)
+ return ret;
+
+ ret = dev->dev_ops->dev_init(dev);
+ if (ret)
+ return ret;
+
+ ret = rte_eth_dev_configure(port_id, dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues, &dev->data->dev_conf);
+ if (ret)
+ return ret;
+
+ for (q = 0; q < dev->data->nb_rx_queues; q++) {
+ rxq_conf = &dev->data->rxq_conf[q];
+ ret = rte_eth_rx_queue_setup(port_id, q, rxq_conf->nb_rx_desc,
+ rxq_conf->socket_id,
+ &rxq_conf->rx_conf,
+ rxq_conf->mp);
+ if (!ret)
+ return ret;
+ }
+
+ for (q = 0; q < dev->data->nb_tx_queues; q++) {
+ txq_conf = &dev->data->txq_conf[q];
+ ret = rte_eth_tx_queue_setup(port_id, q, txq_conf->nb_tx_desc,
+ txq_conf->socket_id,
+ &txq_conf->tx_conf);
+ if (!ret)
+ return ret;
+ }
+
+ ret = rte_eth_dev_start(port_id);
+
+ if (dev->dev_ops->dev_restore)
+ ret = dev->dev_ops->dev_restore(dev);
+
+ return ret;
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 0f38b45..0298a1f 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1085,6 +1085,15 @@ typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
/**< @internal Function used to close a configured Ethernet device. */
+typedef int (*eth_dev_init_t)(struct rte_eth_dev *dev);
+/** < @internal Function used to initialize a configured Ethernet device. */
+
+typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *dev);
+/** < @internal Function used to uninit a configured Ethernet device. */
+
+typedef int (*eth_dev_restore_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to restore a configured Ethernet device. */
+
typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
@@ -1455,6 +1464,9 @@ struct eth_dev_ops {
eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
eth_dev_close_t dev_close; /**< Close device. */
+ eth_dev_init_t dev_init; /**< Initialize device */
+ eth_dev_uninit_t dev_uninit; /**< Uninit device */
+ eth_dev_restore_t dev_restore; /**< Restore device */
eth_link_update_t link_update; /**< Get device link state. */
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
@@ -1689,6 +1701,19 @@ struct rte_eth_dev_sriov {
#define RTE_ETH_NAME_MAX_LEN (32)
+struct rte_eth_rx_queue_conf {
+ uint16_t nb_rx_desc;
+ unsigned int socket_id;
+ struct rte_eth_rxconf rx_conf;
+ struct rte_mempool *mp;
+};
+
+struct rte_eth_tx_queue_conf {
+ uint16_t nb_tx_desc;
+ unsigned int socket_id;
+ struct rte_eth_txconf tx_conf;
+};
+
/**
* @internal
* The data part, with no function pointers, associated with each ethernet device.
@@ -1738,6 +1763,9 @@ struct rte_eth_dev_data {
enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
int numa_node; /**< NUMA node connection */
const char *drv_name; /**< Driver name */
+
+ struct rte_eth_rx_queue_conf *rxq_conf;
+ struct rte_eth_tx_queue_conf *txq_conf;
};
/** Device supports hotplug detach */
@@ -2168,6 +2196,14 @@ int rte_eth_dev_set_link_down(uint8_t port_id);
void rte_eth_dev_close(uint8_t port_id);
/**
+ * Resotre a Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+int rte_eth_dev_restore(uint8_t port_id);
+
+/**
* Enable receipt in promiscuous mode for an Ethernet device.
*
* @param port_id
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index d6726bb..b867c4c 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -156,3 +156,9 @@ DPDK_17.05 {
rte_eth_xstats_get_names_by_id;
} DPDK_17.02;
+
+DPDK_17.08 {
+ global:
+
+ rte_eth_dev_restore;
+} DPDK_17.05;
--
2.7.4
More information about the dev
mailing list