[dpdk-dev] [PATCH] bonding: allow to create master bonding
Tomasz Kulasek
tomaszx.kulasek at intel.com
Sun May 28 21:54:07 CEST 2017
This patch removes restrictions in bonded device library which prevent a
bonded device to be added to another bonded device.
There's two limitations to create master bonding:
- Total depth of nesting is limited to two levels,
- 802.3ad mode is not supported if one or more slaves is a bond device,
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek at intel.com>
---
drivers/net/bonding/rte_eth_bond_api.c | 63 ++++++++++++++++++++++++------
drivers/net/bonding/rte_eth_bond_pmd.c | 6 +++
drivers/net/bonding/rte_eth_bond_private.h | 5 ++-
3 files changed, 60 insertions(+), 14 deletions(-)
diff --git a/drivers/net/bonding/rte_eth_bond_api.c b/drivers/net/bonding/rte_eth_bond_api.c
index 36ec65d..05f565d 100644
--- a/drivers/net/bonding/rte_eth_bond_api.c
+++ b/drivers/net/bonding/rte_eth_bond_api.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -63,13 +63,45 @@
}
int
-valid_slave_port_id(uint8_t port_id)
+check_for_master_bonded_ethdev(const struct rte_eth_dev *eth_dev) {
+ int i;
+ struct bond_dev_private *internals;
+
+ if (check_for_bonded_ethdev(eth_dev) != 0)
+ return 0;
+
+ internals = eth_dev->data->dev_private;
+
+ /* Check if any of slave devices is a bonded device */
+ for (i = 0; i < internals->slave_count; i++)
+ if (valid_bonded_port_id(internals->slaves[i].port_id) == 0)
+ return 1;
+
+ return 0;
+}
+
+int
+valid_slave_port_id(uint8_t port_id, uint8_t mode)
{
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -1);
/* Verify that port_id refers to a non bonded port */
- if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0)
- return -1;
+ if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0) {
+ if (mode == BONDING_MODE_8023AD) {
+ RTE_BOND_LOG(ERR, "One or more slaves is a bond device,"
+ " there 802.3ad mode can not be"
+ " supported on this bond device.");
+ return -1;
+ }
+
+ if (check_for_master_bonded_ethdev(&rte_eth_devices[port_id])) {
+ RTE_BOND_LOG(ERR, "Too many levels of bonding");
+ return -1;
+ }
+
+ /* Slave is in master bonding */
+ return 1;
+ }
return 0;
}
@@ -250,14 +282,19 @@
struct bond_dev_private *internals;
struct rte_eth_link link_props;
struct rte_eth_dev_info dev_info;
-
- if (valid_slave_port_id(slave_port_id) != 0)
- return -1;
+ int status;
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
internals = bonded_eth_dev->data->dev_private;
+ status = valid_slave_port_id(slave_port_id, internals->mode);
+
+ /* Slave is invalid */
+ if (status < 0)
+ return -1;
+
slave_eth_dev = &rte_eth_devices[slave_port_id];
+
if (slave_eth_dev->data->dev_flags & RTE_ETH_DEV_BONDED_SLAVE) {
RTE_BOND_LOG(ERR, "Slave device is already a slave of a bonded device");
return -1;
@@ -402,12 +439,12 @@
struct rte_eth_dev *slave_eth_dev;
int i, slave_idx;
- if (valid_slave_port_id(slave_port_id) != 0)
- return -1;
-
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
internals = bonded_eth_dev->data->dev_private;
+ if (valid_slave_port_id(slave_port_id, internals->mode) < 0)
+ return -1;
+
/* first remove from active slave list */
slave_idx = find_slave_by_id(internals->active_slaves,
internals->active_slave_count, slave_port_id);
@@ -528,11 +565,11 @@
if (valid_bonded_port_id(bonded_port_id) != 0)
return -1;
- if (valid_slave_port_id(slave_port_id) != 0)
- return -1;
-
internals = rte_eth_devices[bonded_port_id].data->dev_private;
+ if (valid_slave_port_id(slave_port_id, internals->mode) < 0)
+ return -1;
+
internals->user_defined_primary_port = 1;
internals->primary_port = slave_port_id;
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 82959ab..d477f37 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1292,6 +1292,12 @@ struct bwg_slave {
eth_dev->rx_pkt_burst = bond_ethdev_rx_burst;
break;
case BONDING_MODE_8023AD:
+ if (check_for_master_bonded_ethdev(eth_dev) == 1) {
+ RTE_BOND_LOG(ERR, "One or more slaves is a bond device,"
+ " there 802.3ad mode can not be"
+ " supported on this bond device.");
+ return -1;
+ }
if (bond_mode_8023ad_enable(eth_dev) != 0)
return -1;
diff --git a/drivers/net/bonding/rte_eth_bond_private.h b/drivers/net/bonding/rte_eth_bond_private.h
index c8db090..1a10564 100644
--- a/drivers/net/bonding/rte_eth_bond_private.h
+++ b/drivers/net/bonding/rte_eth_bond_private.h
@@ -184,6 +184,9 @@ struct bond_dev_private {
int
check_for_bonded_ethdev(const struct rte_eth_dev *eth_dev);
+int
+check_for_master_bonded_ethdev(const struct rte_eth_dev *eth_dev);
+
/* Search given slave array to find possition of given id.
* Return slave pos or slaves_count if not found. */
static inline uint8_t
@@ -205,7 +208,7 @@ struct bond_dev_private {
valid_bonded_port_id(uint8_t port_id);
int
-valid_slave_port_id(uint8_t port_id);
+valid_slave_port_id(uint8_t port_id, uint8_t mode);
void
deactivate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id);
--
1.9.1
More information about the dev
mailing list