[dpdk-dev] [PATCH v6 1/2] eal: add uevent monitor for hot plug

Guo, Jia jia.guo at intel.com
Wed Nov 8 06:39:54 CET 2017


Thanks Stephen for your eye on review, would collect other comment and refine it better in next version.

Best regards,
Jeff Guo

-----Original Message-----
From: Stephen Hemminger [mailto:stephen at networkplumber.org] 
Sent: Thursday, November 2, 2017 5:42 AM
To: Guo, Jia <jia.guo at intel.com>
Cc: Richardson, Bruce <bruce.richardson at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>; gaetan.rivet at 6wind.com; thomas at monjalon.net; Ananyev, Konstantin <konstantin.ananyev at intel.com>; jblunck at infradead.org; shreyansh.jain at nxp.com; Wu, Jingjing <jingjing.wu at intel.com>; dev at dpdk.org; Zhang, Helin <helin.zhang at intel.com>
Subject: Re: [PATCH v6 1/2] eal: add uevent monitor for hot plug

On Thu,  2 Nov 2017 04:16:44 +0800
Jeff Guo <jia.guo at intel.com> wrote:

> +
> +static int
> +dev_uev_parse(const char *buf, struct rte_eal_uevent *event) {
> +	char action[RTE_EAL_UEVENT_MSG_LEN];
> +	char subsystem[RTE_EAL_UEVENT_MSG_LEN];
> +	char dev_path[RTE_EAL_UEVENT_MSG_LEN];
> +	char pci_slot_name[RTE_EAL_UEVENT_MSG_LEN];
> +	int i = 0;
> +
> +	memset(action, 0, RTE_EAL_UEVENT_MSG_LEN);
> +	memset(subsystem, 0, RTE_EAL_UEVENT_MSG_LEN);
> +	memset(dev_path, 0, RTE_EAL_UEVENT_MSG_LEN);
> +	memset(pci_slot_name, 0, RTE_EAL_UEVENT_MSG_LEN);
> +
> +	while (i < RTE_EAL_UEVENT_MSG_LEN) {

Might be simpler, safer, clearer to use rte_strsplit here.

And then have a table of fields rather than open coding the parsing.


> +		for (; i < RTE_EAL_UEVENT_MSG_LEN; i++) {
> +			if (*buf)
> +				break;
> +			buf++;
> +		}
> +		if (!strncmp(buf, "libudev", 7)) {
> +			buf += 7;
> +			i += 7;
> +			event->group = UEV_MONITOR_UDEV;
> +		}
> +		if (!strncmp(buf, "ACTION=", 7)) {
> +			buf += 7;
> +			i += 7;
> +			snprintf(action, sizeof(action), "%s", buf);
> +		} else if (!strncmp(buf, "DEVPATH=", 8)) {
> +			buf += 8;
> +			i += 8;
> +			snprintf(dev_path, sizeof(dev_path), "%s", buf);
> +		} else if (!strncmp(buf, "SUBSYSTEM=", 10)) {
> +			buf += 10;
> +			i += 10;
> +			snprintf(subsystem, sizeof(subsystem), "%s", buf);
> +		} else if (!strncmp(buf, "PCI_SLOT_NAME=", 14)) {
> +			buf += 14;
> +			i += 14;
> +			snprintf(pci_slot_name, sizeof(subsystem), "%s", buf);
> +		}
> +		for (; i < RTE_EAL_UEVENT_MSG_LEN; i++) {
> +			if (*buf == '\0')
> +				break;
> +			buf++;
> +		}
> +	}
> +
> +	if (!strncmp(subsystem, "pci", 3))
> +		event->subsystem = UEV_SUBSYSTEM_PCI;
> +	if (!strncmp(action, "add", 3))
> +		event->type = RTE_EAL_DEV_EVENT_ADD;
> +	if (!strncmp(action, "remove", 6))
> +		event->type = RTE_EAL_DEV_EVENT_REMOVE;
> +	event->devname = pci_slot_name;
> +
> +	return 0;

Function always returns 0, why is it not void?


More information about the dev mailing list