[dpdk-dev] [PATCH 2/2] net/qede: fix default config option

[Ferruh Yigit]

On 11/9/2017 3:00 PM, Patil, Harish wrote:
> -----Original Message-----
> From: Harish Patil <Harish.Patil at cavium.com>
> Date: Thursday, November 9, 2017 at 3:57 PM
> To: Ferruh Yigit <ferruh.yigit at intel.com>, "Mody, Rasesh"
> <Rasesh.Mody at cavium.com>, "dev at dpdk.org" <dev at dpdk.org>,
> "thomas.monjalon at 6wind.com" <thomas.monjalon at 6wind.com>
> Cc: Dept-Eng DPDK Dev <Dept-EngDPDKDev at cavium.com>
> Subject: Re: [dpdk-dev] [PATCH 2/2] net/qede: fix default config option
> 
>> -----Original Message-----
>> From: Ferruh Yigit <ferruh.yigit at intel.com>
>> Date: Thursday, November 9, 2017 at 3:48 PM
>> To: "Mody, Rasesh" <Rasesh.Mody at cavium.com>, "dev at dpdk.org"
>> <dev at dpdk.org>, "thomas.monjalon at 6wind.com" <thomas.monjalon at 6wind.com>
>> Cc: Harish Patil <Harish.Patil at cavium.com>, Dept-Eng DPDK Dev
>> <Dept-EngDPDKDev at cavium.com>
>> Subject: Re: [dpdk-dev] [PATCH 2/2] net/qede: fix default config option
>>
>>> On 11/8/2017 10:52 PM, Rasesh Mody wrote:
>>>> From: Harish Patil <harish.patil at cavium.com>
>>>>
>>>> Restore the default configuration as in previous releases and
>>>> add a debug msg.
>>>
>>> Is this reverting
>>> "f07aa795c92a ("net/qede: disable per-VF Tx switching feature")"
>>>
>>> This will be same as code before f07aa795c92a , right? If so why not just
>>> remove
>>> the config option for this release and add a dynamic runtime in next
>>> release?
>>>
>>> I am not clear for both f07aa795c92a and this one fixing, and why should
>>> they be
>>> included for rc3?
>>>
>>> Thanks,
>>> Ferruh
>>
>> Hi Ferruh,
>> Some customers are interested in getting better performance with 64B sized
>> packets. For that, they would need to keep this config disabled.
>> But in all other cases, by default, we would like to keep Tx switching
>> enabled (at a reduced performance) as in previous releases.
>> As stated in other email with Thomas, we shall remove this compile-time
>> config option in next release and use runtime option instead.
>> But for 17.08 we need it to be enabled by default.
>> Thanks.
> 
> Correction, I meant 17.11 release, not 17.08.

Other patch just sent two days ago, to introduce the config option as disabled
by default, so it was changing the behavior and accepted as a fix for rc3.

Now two days later, this patch enables it as a fix again, only difference for
two days ago becomes adding a config option?


>>
>>>
>>>>
>>>> Fixes: f07aa795c92a ("net/qede: disable per-VF Tx switching feature")
>>>>
>>>> Signed-off-by: Harish Patil <harish.patil at cavium.com>
>>>> Signed-off-by: Rasesh Mody <rasesh.mody at cavium.com>
>>>> ---
>>>>  config/common_base             |    2 +-
>>>>  drivers/net/qede/qede_ethdev.c |    5 +++--
>>>>  2 files changed, 4 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/config/common_base b/config/common_base
>>>> index 34f04a9..e74febe 100644
>>>> --- a/config/common_base
>>>> +++ b/config/common_base
>>>> @@ -415,7 +415,7 @@ CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
>>>>  CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
>>>>  CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
>>>>  CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
>>>> -CONFIG_RTE_LIBRTE_QEDE_VF_TX_SWITCH=n
>>>> +CONFIG_RTE_LIBRTE_QEDE_VF_TX_SWITCH=y
>>>>  #Provides abs path/name of the firmware file.
>>>>  #Empty string denotes driver will use default firmware
>>>>  CONFIG_RTE_LIBRTE_QEDE_FW=""
>>>> diff --git a/drivers/net/qede/qede_ethdev.c
>>>> b/drivers/net/qede/qede_ethdev.c
>>>> index 8832145..6f5ba2a 100644
>>>> --- a/drivers/net/qede/qede_ethdev.c
>>>> +++ b/drivers/net/qede/qede_ethdev.c
>>>> @@ -457,6 +457,7 @@ int qede_activate_vport(struct rte_eth_dev
>>>> *eth_dev, bool flg)
>>>>  	if (IS_VF(edev)) {
>>>>  		params.update_tx_switching_flg = 1;
>>>>  		params.tx_switching_flg = !flg;
>>>> +		DP_INFO(edev, "VF tx-switching is disabled\n");
>>>>  	}
>>>>  #endif
>>>>  	for_each_hwfn(edev, i) {
>>>> @@ -469,8 +470,8 @@ int qede_activate_vport(struct rte_eth_dev
>>>> *eth_dev, bool flg)
>>>>  			break;
>>>>  		}
>>>>  	}
>>>> -	DP_INFO(edev, "vport %s VF tx-switch %s\n", flg ? "activated" :
>>>> "deactivated",
>>>> -			params.tx_switching_flg ? "enabled" : "disabled");
>>>> +	DP_INFO(edev, "vport is %s\n", flg ? "activated" : "deactivated");
>>>> +
>>>>  	return rc;
>>>>  }
>>>>  
>>>>
>>>
>>
>