[dpdk-dev] [PATCH v3 7/7] net/mlx4: add loopback Tx from VF
Ophir Munk
ophirmu at mellanox.com
Wed Oct 4 23:49:06 CEST 2017
From: Moti Haimovsky <motih at mellanox.com>
This patch adds loopback functionality used when the chip is a VF
in order to enable packet transmission between VFs and between VFs and PF.
Signed-off-by: Moti Haimovsky <motih at mellanox.com>
---
drivers/net/mlx4/mlx4_rxtx.c | 38 ++++++++++++++++++++++++++------------
drivers/net/mlx4/mlx4_rxtx.h | 2 ++
drivers/net/mlx4/mlx4_txq.c | 2 ++
3 files changed, 30 insertions(+), 12 deletions(-)
diff --git a/drivers/net/mlx4/mlx4_rxtx.c b/drivers/net/mlx4/mlx4_rxtx.c
index ca66b1d..87c4c38 100644
--- a/drivers/net/mlx4/mlx4_rxtx.c
+++ b/drivers/net/mlx4/mlx4_rxtx.c
@@ -321,10 +321,13 @@ struct pv {
struct mlx4_wqe_data_seg *dseg;
struct mlx4_sq *sq = &txq->msq;
struct rte_mbuf *buf;
+ union {
+ uint32_t flags;
+ uint16_t flags16[2];
+ } srcrb;
uint32_t head_idx = sq->head & sq->txbb_cnt_mask;
uint32_t lkey;
uintptr_t addr;
- uint32_t srcrb_flags;
uint32_t owner_opcode = MLX4_OPCODE_SEND;
uint32_t byte_count;
int wqe_real_size;
@@ -422,21 +425,15 @@ struct pv {
/* Fill the control parameters for this packet. */
ctrl->fence_size = (wqe_real_size >> 4) & 0x3f;
/*
- * The caller should prepare "imm" in advance in order to support
- * VF to VF communication (when the device is a virtual-function
- * device (VF)).
- */
- ctrl->imm = 0;
- /*
* For raw Ethernet, the SOLICIT flag is used to indicate that no icrc
* should be calculated.
*/
txq->elts_comp_cd -= nr_txbbs;
if (unlikely(txq->elts_comp_cd <= 0)) {
txq->elts_comp_cd = txq->elts_comp_cd_init;
- srcrb_flags = MLX4_WQE_CTRL_SOLICIT | MLX4_WQE_CTRL_CQ_UPDATE;
+ srcrb.flags = MLX4_WQE_CTRL_SOLICIT | MLX4_WQE_CTRL_CQ_UPDATE;
} else {
- srcrb_flags = MLX4_WQE_CTRL_SOLICIT;
+ srcrb.flags = MLX4_WQE_CTRL_SOLICIT;
}
/* Enable HW checksum offload if requested */
if (txq->csum &&
@@ -450,13 +447,30 @@ struct pv {
owner_opcode |= MLX4_WQE_CTRL_IIP_HDR_CSUM |
MLX4_WQE_CTRL_IL4_HDR_CSUM;
if (pkt->ol_flags & PKT_TX_OUTER_IP_CKSUM)
- srcrb_flags |= MLX4_WQE_CTRL_IP_HDR_CSUM;
+ srcrb.flags |= MLX4_WQE_CTRL_IP_HDR_CSUM;
} else {
- srcrb_flags |= MLX4_WQE_CTRL_IP_HDR_CSUM |
+ srcrb.flags |= MLX4_WQE_CTRL_IP_HDR_CSUM |
MLX4_WQE_CTRL_TCP_UDP_CSUM;
}
}
- ctrl->srcrb_flags = rte_cpu_to_be_32(srcrb_flags);
+ /*
+ * convert flags to BE before adding the mac address (if at all)
+ * to it
+ */
+ srcrb.flags = rte_cpu_to_be_32(srcrb.flags);
+ if (txq->lb) {
+ /*
+ * Copy destination mac address to the wqe,
+ * this allows loopback in eSwitch, so that VFs and PF
+ * can communicate with each other.
+ */
+ srcrb.flags16[0] = *(rte_pktmbuf_mtod(pkt, uint16_t *));
+ ctrl->imm = *(rte_pktmbuf_mtod_offset(pkt, uint32_t *,
+ sizeof(uint16_t)));
+ } else {
+ ctrl->imm = 0;
+ }
+ ctrl->srcrb_flags = srcrb.flags;
/*
* Make sure descriptor is fully written before
* setting ownership bit (because HW can start
diff --git a/drivers/net/mlx4/mlx4_rxtx.h b/drivers/net/mlx4/mlx4_rxtx.h
index 75c98c1..6f33d1c 100644
--- a/drivers/net/mlx4/mlx4_rxtx.h
+++ b/drivers/net/mlx4/mlx4_rxtx.h
@@ -114,6 +114,8 @@ struct txq {
uint32_t max_inline; /**< Max inline send size. */
uint32_t csum:1; /**< Checksum is supported and enabled */
uint32_t csum_l2tun:1; /**< L2 tun Checksum is supported and enabled */
+ uint32_t lb:1;
+ /**< Whether pkts should be looped-back by eswitch or not */
char *bounce_buf;
/**< memory used for storing the first DWORD of data TXBBs. */
struct {
diff --git a/drivers/net/mlx4/mlx4_txq.c b/drivers/net/mlx4/mlx4_txq.c
index 4eb739c..8205647 100644
--- a/drivers/net/mlx4/mlx4_txq.c
+++ b/drivers/net/mlx4/mlx4_txq.c
@@ -415,6 +415,8 @@ struct txq_mp2mr_mbuf_check_data {
(void *)dev, strerror(rte_errno));
goto error;
}
+ /* If a VF device - need to loopback xmitted packets */
+ tmpl.lb = !!(priv->vf);
/* Clean up txq in case we're reinitializing it. */
DEBUG("%p: cleaning-up old txq just in case", (void *)txq);
mlx4_txq_cleanup(txq);
--
1.8.3.1
More information about the dev
mailing list