[dpdk-dev] [PATCH v2 12/18] net/nfp: support PF multiport

[Alejandro Lucero]

A NFP PF PCI device can have several physical ports, up to 8. Because
DPDK core creates one eth_dev per PCI device, nfp pf probe function
is used. Number of PF ports is obtained from firmware symbol using
NSPU API. Inside PF probe function an eth_dev per port is created and
nfp_net_init invoked for each port.

There are some limitations reagarding multiport: rx interrupts and
device hotplug are not supported.

Interrupts are handled with the VFIO or UIO drivers help. Those
drivers just know about PCI devices, so it is not possible, without
changing how DPDK handles interrupts, manage interrupts assigned to
different PF ports.

About hotplug, the problem is this functionality is based on a PCI
device, and although device pluging is possible, which would add as
many ports as supported by firmware, unpluging is based on device name
linked to a eth_dev, and device name has a suffix now (_portX, with X
being the port index) which DPDK core is not aware of. While rx
interrupts with multiport could be likely solved with some layer of
indirection, hotplug would require changes to DPDK core.

Signed-off-by: Alejandro Lucero <alejandro.lucero at netronome.com>
---
 drivers/net/nfp/nfp_net.c      | 199 +++++++++++++++++++++++++++++++++--------
 drivers/net/nfp/nfp_net_ctrl.h |   3 +
 drivers/net/nfp/nfp_net_pmd.h  |   2 +
 3 files changed, 165 insertions(+), 39 deletions(-)

diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 5b4108a..5bfb18e 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -687,6 +687,11 @@ static void nfp_net_read_mac(struct nfp_net_hw *hw)
 
 	/* check and configure queue intr-vector mapping */
 	if (dev->data->dev_conf.intr_conf.rxq != 0) {
+		if (hw->pf_multiport_enabled) {
+			PMD_INIT_LOG(ERR, "PMD rx interrupt is not supported "
+					  "with NFP multiport PF");
+				return -EINVAL;
+		}
 		if (intr_handle->type == RTE_INTR_HANDLE_UIO) {
 			/*
 			 * Better not to share LSC with RX interrupts.
@@ -2489,11 +2494,43 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 	.rx_queue_intr_disable  = nfp_rx_queue_intr_disable,
 };
 
+/*
+ * All eth_dev created got its private data, but before nfp_net_init, that
+ * private data is referencing private data for all the PF ports. This is due
+ * to how the vNIC bars are mapped based on first port, so all ports need info
+ * about port 0 private data. Inside nfp_net_init the private data pointer is
+ * changed to the right address for each port once the bars have been mapped.
+ *
+ * This functions helps to find out which port and therefore which offset
+ * inside the private data array to use.
+ */
+static int
+get_pf_port_number(char *name)
+{
+	char *pf_str = name;
+	int size = 0;
+
+	while ((*pf_str != '_') && (*pf_str != '\0') && (size++ < 30))
+		pf_str++;
+
+	if (size == 30)
+		/*
+		 * This should not happen at all and it would mean major
+		 * implementation fault.
+		 */
+		rte_panic("nfp_net: problem with pf device name\n");
+
+	/* Expecting _portX with X within [0,7] */
+	pf_str += 5;
+
+	return (int)strtol(pf_str, NULL, 10);
+}
+
 static int
 nfp_net_init(struct rte_eth_dev *eth_dev)
 {
 	struct rte_pci_device *pci_dev;
-	struct nfp_net_hw *hw;
+	struct nfp_net_hw *hw, *hwport0;
 
 	uint64_t tx_bar_off = 0, rx_bar_off = 0;
 	uint32_t start_q;
@@ -2501,10 +2538,32 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 
 	nspu_desc_t *nspu_desc = NULL;
 	uint64_t bar_offset;
+	int port = 0;
 
 	PMD_INIT_FUNC_TRACE();
 
-	hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+	pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+
+	if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
+	    (pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
+		port = get_pf_port_number(eth_dev->data->name);
+		if (port < 0 || port > 7) {
+			RTE_LOG(ERR, PMD, "Port value is wrong\n");
+			return -ENODEV;
+		}
+
+		PMD_INIT_LOG(DEBUG, "Working with PF port value %d\n", port);
+
+		/* This points to port 0 private data */
+		hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+
+		/* This points to the specific port private data */
+		hw = &hwport0[port];
+		hw->pf_port_idx = port;
+	} else {
+		hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+		hwport0 = 0;
+	}
 
 	eth_dev->dev_ops = &nfp_net_eth_dev_ops;
 	eth_dev->rx_pkt_burst = &nfp_net_recv_pkts;
@@ -2514,9 +2573,10 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
 		return 0;
 
-	pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
 	rte_eth_copy_pci_info(eth_dev, pci_dev);
-	eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
+	/* hotplug is not possible with multiport PF */
+	if (!hw->pf_multiport_enabled)
+		eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
 
 	hw->device_id = pci_dev->id.device_id;
 	hw->vendor_id = pci_dev->id.vendor_id;
@@ -2535,9 +2595,7 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 		return -ENODEV;
 	}
 
-	/* Is this a PF device? */
-	if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
-	    (pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
+	if (hw->is_pf && port == 0) {
 		nspu_desc = hw->nspu_desc;
 
 		if (nfp_nsp_map_ctrl_bar(nspu_desc, &bar_offset) != 0) {
@@ -2554,6 +2612,17 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 		PMD_INIT_LOG(DEBUG, "ctrl bar: %p\n", hw->ctrl_bar);
 	}
 
+	if (port > 0) {
+		if (!hwport0->ctrl_bar)
+			return -ENODEV;
+
+		/* address based on port0 offset */
+		hw->ctrl_bar = hwport0->ctrl_bar +
+			       (port * NFP_PF_CSR_SLICE_SIZE);
+	}
+
+	PMD_INIT_LOG(DEBUG, "ctrl bar: %p\n", hw->ctrl_bar);
+
 	hw->max_rx_queues = nn_cfg_readl(hw, NFP_NET_CFG_MAX_RXRINGS);
 	hw->max_tx_queues = nn_cfg_readl(hw, NFP_NET_CFG_MAX_TXRINGS);
 
@@ -2575,18 +2644,21 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 	PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%" PRIx64 "\n", tx_bar_off);
 	PMD_INIT_LOG(DEBUG, "rx_bar_off: 0x%" PRIx64 "\n", rx_bar_off);
 
-	if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
-	    (pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
+	if (hw->is_pf && port == 0) {
 		/* configure access to tx/rx vNIC BARs */
 		nfp_nsp_map_queues_bar(nspu_desc, &bar_offset);
 		PMD_INIT_LOG(DEBUG, "tx/rx bar_offset: %" PRIx64 "\n",
 				    bar_offset);
-		hw->hw_queues = (uint8_t *)pci_dev->mem_resource[0].addr;
+		hwport0->hw_queues = (uint8_t *)pci_dev->mem_resource[0].addr;
 
 		/* vNIC PF tx/rx BARs are a subset of PF PCI device */
-		hw->hw_queues += bar_offset;
-		hw->tx_bar = hw->hw_queues + tx_bar_off;
-		hw->rx_bar = hw->hw_queues + rx_bar_off;
+		hwport0->hw_queues += bar_offset;
+	}
+
+	if (hw->is_pf) {
+		hw->tx_bar = hwport0->hw_queues + tx_bar_off;
+		hw->rx_bar = hwport0->hw_queues + rx_bar_off;
+		eth_dev->data->dev_private = hw;
 	} else {
 		hw->tx_bar = (uint8_t *)pci_dev->mem_resource[2].addr +
 			     tx_bar_off;
@@ -2674,16 +2746,77 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
 	return 0;
 }
 
-static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
-			    struct rte_pci_device *dev)
+static int
+nfp_pf_create_dev(struct rte_pci_device *dev, int port, int ports,
+		  nfpu_desc_t *nfpu_desc, void **priv)
 {
 	struct rte_eth_dev *eth_dev;
 	struct nfp_net_hw *hw;
+	char *port_name;
+	int ret;
+
+	port_name = rte_zmalloc("nfp_pf_port_name", 100, 0);
+	if (!port_name)
+		return -ENOMEM;
+
+	if (ports > 1)
+		sprintf(port_name, "%s_port%d", dev->device.name, port);
+	else
+		sprintf(port_name, "%s", dev->device.name);
+
+	eth_dev = rte_eth_dev_allocate(port_name);
+	if (!eth_dev)
+		return -ENOMEM;
+
+	if (port == 0) {
+		*priv = rte_zmalloc(port_name,
+				    sizeof(struct nfp_net_adapter) * ports,
+				    RTE_CACHE_LINE_SIZE);
+		if (!*priv) {
+			rte_eth_dev_release_port(eth_dev);
+			return -ENOMEM;
+		}
+	}
+
+	eth_dev->data->dev_private = *priv;
+
+	/*
+	 * dev_private pointing to port0 dev_private because we need
+	 * to configure vNIC bars based on port0 at nfp_net_init.
+	 * Then dev_private is adjusted per port.
+	 */
+	hw = (struct nfp_net_hw *)(eth_dev->data->dev_private) + port;
+	hw->nspu_desc = nfpu_desc->nspu;
+	hw->nfpu_desc = nfpu_desc;
+	hw->is_pf = 1;
+	if (ports > 1)
+		hw->pf_multiport_enabled = 1;
+
+	eth_dev->device = &dev->device;
+	rte_eth_copy_pci_info(eth_dev, dev);
+
+	ret = nfp_net_init(eth_dev);
+
+	if (ret)
+		rte_eth_dev_release_port(eth_dev);
+
+	rte_free(port_name);
+
+	return ret;
+}
+
+static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+			    struct rte_pci_device *dev)
+{
 	nfpu_desc_t *nfpu_desc;
 	nspu_desc_t *nspu_desc;
 	uint64_t offset_symbol;
+	uint8_t *bar_offset;
 	int major, minor;
+	int total_ports;
+	void *priv = 0;
 	int ret = -ENODEV;
+	int i;
 
 	if (!dev)
 		return ret;
@@ -2718,36 +2851,24 @@ static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 	if (ret)
 		goto error;
 
-	eth_dev = rte_eth_dev_allocate(dev->device.name);
-	if (!eth_dev) {
-		ret = -ENODEV;
-		goto error;
-	}
+	bar_offset = (uint8_t *)dev->mem_resource[0].addr;
+	bar_offset += offset_symbol;
+	total_ports = (uint32_t)*bar_offset;
+	PMD_INIT_LOG(INFO, "Total pf ports: %d\n", total_ports);
 
-	eth_dev->data->dev_private = rte_zmalloc("nfp_pf_port",
-						 sizeof(struct nfp_net_adapter),
-						 RTE_CACHE_LINE_SIZE);
-	if (!eth_dev->data->dev_private) {
-		rte_eth_dev_release_port(eth_dev);
+	if (total_ports <= 0 || total_ports > 8) {
+		RTE_LOG(ERR, PMD, "nfd_cfg_pf0_num_ports symbol with wrong value");
 		ret = -ENODEV;
 		goto error;
 	}
 
-	hw = (struct nfp_net_hw *)(eth_dev->data->dev_private);
-	hw->nspu_desc = nspu_desc;
-	hw->nfpu_desc = nfpu_desc;
-	hw->is_pf = 1;
-
-	eth_dev->device = &dev->device;
-	rte_eth_copy_pci_info(eth_dev, dev);
-
-	ret = nfp_net_init(eth_dev);
-
-	if (!ret)
-		return 0;
+	for (i = 0; i < total_ports; i++) {
+		ret = nfp_pf_create_dev(dev, i, total_ports, nfpu_desc, &priv);
+		if (ret)
+			goto error;
+	}
 
-	/* something went wrong */
-	rte_eth_dev_release_port(eth_dev);
+	return 0;
 
 error:
 	nfpu_close(nfpu_desc);
diff --git a/drivers/net/nfp/nfp_net_ctrl.h b/drivers/net/nfp/nfp_net_ctrl.h
index c1cba0e..1ebd99c 100644
--- a/drivers/net/nfp/nfp_net_ctrl.h
+++ b/drivers/net/nfp/nfp_net_ctrl.h
@@ -334,6 +334,9 @@
 #define NFP_NET_CFG_RXR_STATS(_x)       (NFP_NET_CFG_RXR_STATS_BASE + \
 					 ((_x) * 0x10))
 
+/* PF multiport offset */
+#define NFP_PF_CSR_SLICE_SIZE	(32 * 1024)
+
 #endif /* _NFP_NET_CTRL_H_ */
 /*
  * Local variables:
diff --git a/drivers/net/nfp/nfp_net_pmd.h b/drivers/net/nfp/nfp_net_pmd.h
index 0f902fc..d7e38d4 100644
--- a/drivers/net/nfp/nfp_net_pmd.h
+++ b/drivers/net/nfp/nfp_net_pmd.h
@@ -439,6 +439,8 @@ struct nfp_net_hw {
 #endif
 	uint8_t *hw_queues;
 	uint8_t is_pf;
+	uint8_t pf_port_idx;
+	uint8_t pf_multiport_enabled;
 	nspu_desc_t *nspu_desc;
 	nfpu_desc_t *nfpu_desc;
 };
-- 
1.9.1