[dpdk-dev] [PATCH] i40e: fix i40e_validate_mac_addr to permit multicast addresses

David Harton (dharton) dharton at cisco.com
Mon Sep 11 19:22:30 CEST 2017


Hi Beilei,

> -----Original Message-----
> From: Xing, Beilei [mailto:beilei.xing at intel.com]
> 
> Hi,
> 
> > -----Original Message-----
> > From: David Harton [mailto:dharton at cisco.com]
> >
> > The i40e maintains a single MAC filter table for both unicast and
> > multicast addresses.  The i40e_validate_mac_addr function was
> > preventing multicast addresses from being added to the table via
> > i40evf_add_mac_addr.  Fixed the issue by removing the multicast
> > address check in i40e_validate_mac_addr.
> >
> 
> Maybe fix line is needed here.

Please elaborate.  If feel this is a regression and you want 
me to add a fixline can you offer the offending commit?

> 
> > Signed-off-by: David Harton <dharton at cisco.com>
> > ---
> >  drivers/net/i40e/base/i40e_common.c | 12 +++++-------
> >  drivers/net/i40e/i40e_ethdev.c      |  3 ++-
> >  2 files changed, 7 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/net/i40e/base/i40e_common.c
> > b/drivers/net/i40e/base/i40e_common.c
> > index 900d379..9779854 100644
> > --- a/drivers/net/i40e/base/i40e_common.c
> > +++ b/drivers/net/i40e/base/i40e_common.c
> > @@ -969,10 +969,10 @@ struct i40e_rx_ptype_decoded i40e_ptype_lookup[]
> > = {
> >
> >
> >  /**
> > - * i40e_validate_mac_addr - Validate unicast MAC address
> > + * i40e_validate_mac_addr - Validate MAC address
> >   * @mac_addr: pointer to MAC address
> >   *
> > - * Tests a MAC address to ensure it is a valid Individual Address
> > + * Tests a MAC address to ensure it is a valid Address
> >   **/
> >  enum i40e_status_code i40e_validate_mac_addr(u8 *mac_addr)  { @@ -
> > 980,13 +980,11 @@ enum i40e_status_code i40e_validate_mac_addr(u8
> > *mac_addr)
> >
> >  	DEBUGFUNC("i40e_validate_mac_addr");
> >
> > -	/* Broadcast addresses ARE multicast addresses
> > -	 * Make sure it is not a multicast address
> > +	/*
> >  	 * Reject the zero address
> >  	 */
> > -	if (I40E_IS_MULTICAST(mac_addr) ||
> > -	    (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
> > -	      mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0))
> > +	if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
> > +	    mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
> >  		status = I40E_ERR_INVALID_MAC_ADDR;
> >
> 
> We'd better not to change the base code which is from kernel driver. How
> about changing the i40evf_add_mac_addr function as following:
> -	if (i40e_validate_mac_addr(addr->addr_bytes) != I40E_SUCCESS) {
> +	if (is_zero_ether_addr (addr->addr_bytes) != I40E_SUCCESS) {
> 
> Then following modification in eth_i40e_dev_init function can be removed.
> But we should also pay attention to other functions which call
> i40evf_add_mac_addr.

Sure.  I'll post a new patch as suggested once the fixline question is answered.  

I was trying to fix the issue the way I did in case i40e passthru 
wanted to benefit.  Your suggestion will work for the VF as the only 
other caller for i40evf_add_mac_addr() performs its own macaddr validation.

Thanks,
Dave

> 
> Beilei
> 
> >  	return status;
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 5f26e24..00b6082 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -1199,7 +1199,8 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
> >
> >  	/* Get and check the mac address */
> >  	i40e_get_mac_addr(hw, hw->mac.addr);
> > -	if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS) {
> > +	if (i40e_validate_mac_addr(hw->mac.addr) != I40E_SUCCESS ||
> > +	    I40E_IS_MULTICAST(hw->mac.addr)) {
> >  		PMD_INIT_LOG(ERR, "mac address is not valid");
> >  		ret = -EIO;
> >  		goto err_get_mac_addr;
> > --
> > 2.10.3.dirty



More information about the dev mailing list