[dpdk-dev] [PATCH V18 4/4] app/testpmd: enable device hotplug monitoring

Guo, Jia jia.guo at intel.com
Thu Apr 5 10:40:01 CEST 2018



On 4/5/2018 12:31 AM, Matan Azrad wrote:
> Hi all
>
> What do you think about adding the "--hotplug" parameter as a new EAL command line parameter?
that just use testpmd for example at this stage, if the total solution 
is accept for all and got agreement for that i think could let it in EAL 
command in the coming patch set..
good suggestion, azrad.
> From: Tan, Jianfeng, Wednesday, April 4, 2018 6:23 AM
>>> -----Original Message-----
>>> From: Guo, Jia
>>> Sent: Tuesday, April 3, 2018 6:34 PM
>>> To: stephen at networkplumber.org; Richardson, Bruce; Yigit, Ferruh;
>>> Ananyev, Konstantin; gaetan.rivet at 6wind.com; Wu, Jingjing;
>>> thomas at monjalon.net; motih at mellanox.com; Van Haaren, Harry; Tan,
>>> Jianfeng
>>> Cc: jblunck at infradead.org; shreyansh.jain at nxp.com; dev at dpdk.org; Guo,
>>> Jia; Zhang, Helin
>>> Subject: [PATCH V18 4/4] app/testpmd: enable device hotplug monitoring
>>>
>>> Use testpmd for example, to show how an application use device event
>> s/use/uses
>>
>>> APIs to monitor the hotplug events, including both hot removal event
>>> and hot insertion event.
>>>
>>> The process is that, testpmd first enable hotplug by below commands,
>>>
>>> E.g. ./build/app/testpmd -c 0x3 --n 4 -- -i --hot-plug
>>>
>>> then testpmd start the device event monitor by call the new API
>> s/start/starts
>> s/call/calling
>>
>>> (rte_dev_event_monitor_start) and register the user's callback by call
>>> the API (rte_dev_event_callback_register), when device being hotplug
>>> insertion or hotplug removal, the device event monitor detects the
>>> event and call user's callbacks, user could process the event in the
>>> callback accordingly.
>>>
>>> This patch only shows the event monitoring, device attach/detach would
>>> not be involved here, will add from other hotplug patch set.
>>>
>>> Signed-off-by: Jeff Guo <jia.guo at intel.com>
>> Some typos and a trivial suggestion. Feel free to carry my
>>
>> Reviewed-by: Jianfeng Tan <jianfeng.tan at intel.com>
>>
>> in the next version.
>>
>>> ---
>>> v18->v17:
>>> remove hotplug policy and detach/attach process from testpmd, let it
>>> focus on the device event monitoring which the patch set introduced.
>>> ---
>>>   app/test-pmd/parameters.c             |   5 +-
>>>   app/test-pmd/testpmd.c                | 112
>>> +++++++++++++++++++++++++++++++++-
>>>   app/test-pmd/testpmd.h                |   2 +
>>>   doc/guides/testpmd_app_ug/run_app.rst |   4 ++
>>>   4 files changed, 121 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
>>> index 97d22b8..558cd40 100644
>>> --- a/app/test-pmd/parameters.c
>>> +++ b/app/test-pmd/parameters.c
>>> @@ -186,6 +186,7 @@ usage(char* progname)
>>>   	printf("  --flow-isolate-all: "
>>>   	       "requests flow API isolated mode on all ports at
>>> initialization time.\n");
>>>   	printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX
>> queue
>>> offloads\n");
>>> +	printf("  --hot-plug: enable hot plug for device.\n");
>>>   }
>>>
>>>   #ifdef RTE_LIBRTE_CMDLINE
>>> @@ -621,6 +622,7 @@ launch_args_parse(int argc, char** argv)
>>>   		{ "print-event",		1, 0, 0 },
>>>   		{ "mask-event",			1, 0, 0 },
>>>   		{ "tx-offloads",		1, 0, 0 },
>>> +		{ "hot-plug",			0, 0, 0 },
>>>   		{ 0, 0, 0, 0 },
>>>   	};
>>>
>>> @@ -1102,7 +1104,8 @@ launch_args_parse(int argc, char** argv)
>>>   					rte_exit(EXIT_FAILURE,
>>>   						 "invalid mask-event
>>> argument\n");
>>>   				}
>>> -
>>> +			if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
>>> +				hot_plug = 1;
>>>   			break;
>>>   		case 'h':
>>>   			usage(argv[0]);
>>> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
>>> 4c0e258..2faeb90 100644
>>> --- a/app/test-pmd/testpmd.c
>>> +++ b/app/test-pmd/testpmd.c
>>> @@ -12,6 +12,7 @@
>>>   #include <sys/mman.h>
>>>   #include <sys/types.h>
>>>   #include <errno.h>
>>> +#include <stdbool.h>
>>>
>>>   #include <sys/queue.h>
>>>   #include <sys/stat.h>
>>> @@ -284,6 +285,8 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
>>>    */
>>>   uint8_t rmv_interrupt = 1; /* enabled by default */
>>>
>>> +uint8_t hot_plug = 0; /**< hotplug disabled by default. */
>>> +
>>>   /*
>>>    * Display or mask ether events
>>>    * Default to all events except VF_MBOX @@ -391,6 +394,12 @@ static
>>> void check_all_ports_link_status(uint32_t
>>> port_mask);
>>>   static int eth_event_callback(portid_t port_id,
>>>   			      enum rte_eth_event_type type,
>>>   			      void *param, void *ret_param);
>>> +static int eth_dev_event_callback(char *device_name,
>>> +				enum rte_dev_event_type type,
>>> +				void *param);
>>> +static int eth_dev_event_callback_register(void);
>>> +static int eth_dev_event_callback_unregister(void);
>>> +
>>>
>>>   /*
>>>    * Check if all the ports are started.
>>> @@ -1853,6 +1862,39 @@ reset_port(portid_t pid)
>>>   	printf("Done\n");
>>>   }
>>>
>>> +static int
>>> +eth_dev_event_callback_register(void)
>>> +{
>>> +	int diag;
>>> +
>>> +	/* register the device event callback */
>>> +	diag = rte_dev_event_callback_register(NULL,
>>> +		eth_dev_event_callback, NULL);
>>> +	if (diag) {
>>> +		printf("Failed to setup dev_event callback\n");
>>> +		return -1;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +
>>> +static int
>>> +eth_dev_event_callback_unregister(void)
>>> +{
>>> +	int diag;
>>> +
>>> +	/* unregister the device event callback */
>>> +	diag = rte_dev_event_callback_unregister(NULL,
>>> +		eth_dev_event_callback, NULL);
>>> +	if (diag) {
>>> +		printf("Failed to setup dev_event callback\n");
>>> +		return -1;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>>   void
>>>   attach_port(char *identifier)
>>>   {
>>> @@ -1916,6 +1958,7 @@ void
>>>   pmd_test_exit(void)
>>>   {
>>>   	portid_t pt_id;
>>> +	int ret;
>>>
>>>   	if (test_done == 0)
>>>   		stop_packet_forwarding();
>>> @@ -1929,6 +1972,18 @@ pmd_test_exit(void)
>>>   			close_port(pt_id);
>>>   		}
>>>   	}
>>> +
>>> +	if (hot_plug) {
>>> +		ret = rte_dev_event_monitor_stop();
>>> +		if (ret)
>>> +			RTE_LOG(ERR, EAL,
>>> +				"fail to stop device event monitor.");
>>> +
>>> +		ret = eth_dev_event_callback_unregister();
>>> +		if (ret)
>>> +			RTE_LOG(ERR, EAL,
>>> +				"fail to unregister all event callbacks.");
>>> +	}
>>>   	printf("\nBye...\n");
>>>   }
>>>
>>> @@ -2059,6 +2114,48 @@ eth_event_callback(portid_t port_id, enum
>>> rte_eth_event_type type, void *param,
>>>   	return 0;
>>>   }
>>>
>>> +/* This function is used by the interrupt thread */ static int
>>> +eth_dev_event_callback(char *device_name, enum rte_dev_event_type
>>> type,
>>> +			     __rte_unused void *arg)
>>> +{
>>> +	int ret = 0;
>>  From here
>>
>>> +	static const char * const event_desc[] = {
>>> +		[RTE_DEV_EVENT_ADD] = "add",
>>> +		[RTE_DEV_EVENT_REMOVE] = "remove",
>>> +	};
>>> +
>>> +	if (type >= RTE_DEV_EVENT_MAX) {
>>> +		fprintf(stderr, "%s called upon invalid event %d\n",
>>> +			__func__, type);
>>> +		fflush(stderr);
>>> +	} else if (event_print_mask & (UINT32_C(1) << type)) {
>>> +		printf("%s event\n",
>>> +			event_desc[type]);
>>> +		fflush(stdout);
>>> +	}
>> to here, these check are not necessary.
>>
>>> +
>>> +	switch (type) {
>>> +	case RTE_DEV_EVENT_REMOVE:
>>> +		RTE_LOG(ERR, EAL, "The device: %s has been removed!\n",
>>> +			device_name);
>>> +		/* TODO: After finish failure handle, begin to stop
>>> +		 * packet forward, stop port, close port, detach port.
>>> +		 */
>>> +		break;
>>> +	case RTE_DEV_EVENT_ADD:
>>> +		RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
>>> +			device_name);
>>> +		/* TODO: After finish kernel driver binding,
>>> +		 * begin to attach port.
>>> +		 */
>>> +		break;
>>> +	default:
>>> +		break;
>>> +	}
>>> +	return ret;
>>> +}
>>> +
>>>   static int
>>>   set_tx_queue_stats_mapping_registers(portid_t port_id, struct
>>> rte_port
>>> *port)
>>>   {
>>> @@ -2474,8 +2571,9 @@ signal_handler(int signum)  int  main(int argc,
>>> char** argv)  {
>>> -	int  diag;
>>> +	int diag;
>>>   	portid_t port_id;
>>> +	int ret;
>>>
>>>   	signal(SIGINT, signal_handler);
>>>   	signal(SIGTERM, signal_handler);
>>> @@ -2543,6 +2641,18 @@ main(int argc, char** argv)
>>>   		       nb_rxq, nb_txq);
>>>
>>>   	init_config();
>>> +
>>> +	if (hot_plug) {
>>> +		/* enable hot plug monitoring */
>>> +		ret = rte_dev_event_monitor_start();
>>> +		if (ret) {
>>> +			rte_errno = EINVAL;
>>> +			return -1;
>>> +		}
>>> +		eth_dev_event_callback_register();
>>> +
>>> +	}
>>> +
>>>   	if (start_port(RTE_PORT_ALL) != 0)
>>>   		rte_exit(EXIT_FAILURE, "Start ports failed\n");
>>>
>>> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
>>> 153abea..8fde68d 100644
>>> --- a/app/test-pmd/testpmd.h
>>> +++ b/app/test-pmd/testpmd.h
>>> @@ -319,6 +319,8 @@ extern volatile int test_done; /* stop packet
>>> forwarding when set to 1. */  extern uint8_t lsc_interrupt; /**<
>>> disabled by "--no-lsc-interrupt" parameter */  extern uint8_t
>>> rmv_interrupt; /**< disabled by "--no-rmv-interrupt"
>>> parameter */
>>>   extern uint32_t event_print_mask;
>>> +extern uint8_t hot_plug; /**< enable by "--hot-plug" parameter */
>>> +
>>>   /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
>>>
>>>   #ifdef RTE_LIBRTE_IXGBE_BYPASS
>>> diff --git a/doc/guides/testpmd_app_ug/run_app.rst
>>> b/doc/guides/testpmd_app_ug/run_app.rst
>>> index 1fd5395..d0ced36 100644
>>> --- a/doc/guides/testpmd_app_ug/run_app.rst
>>> +++ b/doc/guides/testpmd_app_ug/run_app.rst
>>> @@ -479,3 +479,7 @@ The commandline options are:
>>>
>>>       Set the hexadecimal bitmask of TX queue offloads.
>>>       The default value is 0.
>>> +
>>> +*   ``--hot-plug``
>>> +
>>> +    Enable device event monitor machenism for hotplug.
>> s/machenism/mechanism
>>
>>> --
>>> 2.7.4



More information about the dev mailing list