[dpdk-dev] [PATCH v2 13/15] ethdev: rename physical port item in flow API

[Adrien Mazarguil]

While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.

Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.

No ABI impact.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
---
 app/test-pmd/cmdline_flow.c                 | 27 +++++++++++----------
 app/test-pmd/config.c                       |  2 +-
 doc/guides/prog_guide/rte_flow.rst          | 22 ++++++++---------
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  2 +-
 lib/librte_ether/rte_flow.c                 |  2 +-
 lib/librte_ether/rte_flow.h                 | 31 ++++++++++--------------
 6 files changed, 41 insertions(+), 45 deletions(-)

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 741d66b22..bfe532f0a 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -87,8 +87,8 @@ enum index {
 	ITEM_PF,
 	ITEM_VF,
 	ITEM_VF_ID,
-	ITEM_PORT,
-	ITEM_PORT_INDEX,
+	ITEM_PHY_PORT,
+	ITEM_PHY_PORT_INDEX,
 	ITEM_RAW,
 	ITEM_RAW_RELATIVE,
 	ITEM_RAW_SEARCH,
@@ -441,7 +441,7 @@ static const enum index next_item[] = {
 	ITEM_ANY,
 	ITEM_PF,
 	ITEM_VF,
-	ITEM_PORT,
+	ITEM_PHY_PORT,
 	ITEM_RAW,
 	ITEM_ETH,
 	ITEM_VLAN,
@@ -482,8 +482,8 @@ static const enum index item_vf[] = {
 	ZERO,
 };
 
-static const enum index item_port[] = {
-	ITEM_PORT_INDEX,
+static const enum index item_phy_port[] = {
+	ITEM_PHY_PORT_INDEX,
 	ITEM_NEXT,
 	ZERO,
 };
@@ -1059,18 +1059,19 @@ static const struct token token_list[] = {
 		.next = NEXT(item_vf, NEXT_ENTRY(UNSIGNED), item_param),
 		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_vf, id)),
 	},
-	[ITEM_PORT] = {
-		.name = "port",
-		.help = "device-specific physical port index to use",
-		.priv = PRIV_ITEM(PORT, sizeof(struct rte_flow_item_port)),
-		.next = NEXT(item_port),
+	[ITEM_PHY_PORT] = {
+		.name = "phy_port",
+		.help = "match traffic from/to a specific physical port",
+		.priv = PRIV_ITEM(PHY_PORT,
+				  sizeof(struct rte_flow_item_phy_port)),
+		.next = NEXT(item_phy_port),
 		.call = parse_vc,
 	},
-	[ITEM_PORT_INDEX] = {
+	[ITEM_PHY_PORT_INDEX] = {
 		.name = "index",
 		.help = "physical port index",
-		.next = NEXT(item_port, NEXT_ENTRY(UNSIGNED), item_param),
-		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_port, index)),
+		.next = NEXT(item_phy_port, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_phy_port, index)),
 	},
 	[ITEM_RAW] = {
 		.name = "raw",
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 49ef87782..9f968919e 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -960,7 +960,7 @@ static const struct {
 	MK_FLOW_ITEM(ANY, sizeof(struct rte_flow_item_any)),
 	MK_FLOW_ITEM(PF, 0),
 	MK_FLOW_ITEM(VF, sizeof(struct rte_flow_item_vf)),
-	MK_FLOW_ITEM(PORT, sizeof(struct rte_flow_item_port)),
+	MK_FLOW_ITEM(PHY_PORT, sizeof(struct rte_flow_item_phy_port)),
 	MK_FLOW_ITEM(RAW, sizeof(struct rte_flow_item_raw)),
 	MK_FLOW_ITEM(ETH, sizeof(struct rte_flow_item_eth)),
 	MK_FLOW_ITEM(VLAN, sizeof(struct rte_flow_item_vlan)),
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index beedc713b..656d4b5b7 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -189,8 +189,8 @@ When supported, this effectively enables an application to re-route traffic
 not necessarily intended for it (e.g. coming from or addressed to different
 physical ports, VFs or applications) at the device level.
 
-It complements the behavior of some pattern items such as `Item: PORT`_ and
-is meaningless without them.
+It complements the behavior of some pattern items such as `Item: PHY_PORT`_
+and is meaningless without them.
 
 Pattern item
 ~~~~~~~~~~~~
@@ -573,15 +573,15 @@ separate entities, should be addressed through their own DPDK port IDs.
    | ``mask`` | ``id``   | zeroed to match any VF ID |
    +----------+----------+---------------------------+
 
-Item: ``PORT``
-^^^^^^^^^^^^^^
+Item: ``PHY_PORT``
+^^^^^^^^^^^^^^^^^^
 
-Matches packets coming from the specified physical port of the underlying
-device.
+Matches traffic originating from (ingress) or going to (egress) a physical
+port of the underlying device.
 
-The first PORT item overrides the physical port normally associated with the
-specified DPDK input port (port_id). This item can be provided several times
-to match additional physical ports.
+The first PHY_PORT item overrides the physical port normally associated with
+the specified DPDK input port (port_id). This item can be provided several
+times to match additional physical ports.
 
 Note that physical ports are not necessarily tied to DPDK input ports
 (port_id) when those are not under DPDK control. Possible values are
@@ -593,9 +593,9 @@ associated with a port_id should be retrieved by other means.
 
 - Default ``mask`` matches any port index.
 
-.. _table_rte_flow_item_port:
+.. _table_rte_flow_item_phy_port:
 
-.. table:: PORT
+.. table:: PHY_PORT
 
    +----------+-----------+--------------------------------+
    | Field    | Subfield  | Value                          |
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 2f1db9a29..1d9ce6963 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3208,7 +3208,7 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``id {unsigned}``: VF ID.
 
-- ``port``: device-specific physical port index to use.
+- ``phy_port``: match traffic from/to a specific physical port.
 
   - ``index {unsigned}``: physical port index.
 
diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
index 1f247d656..6d4d7f5ed 100644
--- a/lib/librte_ether/rte_flow.c
+++ b/lib/librte_ether/rte_flow.c
@@ -38,7 +38,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(ANY, sizeof(struct rte_flow_item_any)),
 	MK_FLOW_ITEM(PF, 0),
 	MK_FLOW_ITEM(VF, sizeof(struct rte_flow_item_vf)),
-	MK_FLOW_ITEM(PORT, sizeof(struct rte_flow_item_port)),
+	MK_FLOW_ITEM(PHY_PORT, sizeof(struct rte_flow_item_phy_port)),
 	MK_FLOW_ITEM(RAW, sizeof(struct rte_flow_item_raw)),
 	MK_FLOW_ITEM(ETH, sizeof(struct rte_flow_item_eth)),
 	MK_FLOW_ITEM(VLAN, sizeof(struct rte_flow_item_vlan)),
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index bb9d59833..cd4cde3fa 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -84,7 +84,7 @@ struct rte_flow_attr {
 	 * applications) at the device level.
 	 *
 	 * It complements the behavior of some pattern items such as
-	 * RTE_FLOW_ITEM_TYPE_PORT and is meaningless without them.
+	 * RTE_FLOW_ITEM_TYPE_PHY_PORT and is meaningless without them.
 	 */
 	uint32_t transfer:1;
 	uint32_t reserved:29; /**< Reserved, must be zero. */
@@ -168,17 +168,12 @@ enum rte_flow_item_type {
 	/**
 	 * [META]
 	 *
-	 * Matches packets coming from the specified physical port of the
-	 * underlying device.
-	 *
-	 * The first PORT item overrides the physical port normally
-	 * associated with the specified DPDK input port (port_id). This
-	 * item can be provided several times to match additional physical
-	 * ports.
+	 * Matches traffic originating from (ingress) or going to (egress) a
+	 * physical port of the underlying device.
 	 *
-	 * See struct rte_flow_item_port.
+	 * See struct rte_flow_item_phy_port.
 	 */
-	RTE_FLOW_ITEM_TYPE_PORT,
+	RTE_FLOW_ITEM_TYPE_PHY_PORT,
 
 	/**
 	 * Matches a byte string of a given length at a given offset.
@@ -384,13 +379,13 @@ static const struct rte_flow_item_vf rte_flow_item_vf_mask = {
 #endif
 
 /**
- * RTE_FLOW_ITEM_TYPE_PORT
+ * RTE_FLOW_ITEM_TYPE_PHY_PORT
  *
- * Matches packets coming from the specified physical port of the underlying
- * device.
+ * Matches traffic originating from (ingress) or going to (egress) a
+ * physical port of the underlying device.
  *
- * The first PORT item overrides the physical port normally associated with
- * the specified DPDK input port (port_id). This item can be provided
+ * The first PHY_PORT item overrides the physical port normally associated
+ * with the specified DPDK input port (port_id). This item can be provided
  * several times to match additional physical ports.
  *
  * Note that physical ports are not necessarily tied to DPDK input ports
@@ -403,13 +398,13 @@ static const struct rte_flow_item_vf rte_flow_item_vf_mask = {
  *
  * A zeroed mask can be used to match any port index.
  */
-struct rte_flow_item_port {
+struct rte_flow_item_phy_port {
 	uint32_t index; /**< Physical port index. */
 };
 
-/** Default mask for RTE_FLOW_ITEM_TYPE_PORT. */
+/** Default mask for RTE_FLOW_ITEM_TYPE_PHY_PORT. */
 #ifndef __cplusplus
-static const struct rte_flow_item_port rte_flow_item_port_mask = {
+static const struct rte_flow_item_phy_port rte_flow_item_phy_port_mask = {
 	.index = 0x00000000,
 };
 #endif
-- 
2.11.0