[dpdk-dev] [PATCH 3/4] mk: allow kernel artifacts to be located in output directory

[Scott Branden]

Hi Ferruh,

Somehow I did not receive your other email so Ajit fowarded it to me.  
So I am responding to it here.

Sorry for the previous confusion:  RTE_KERNELDIR_OUT specifies the 
location of the output of the kernel artifacts, not the output of the 
DPDK build artifacts.

Here is an example to use RTE_KERNELDIR_OUT:

export ARCH=arm64
export CROSS_COMPILE=~/gcc-linaro-aarch64-linux-gnu/bin/aarch64-linux-gnu-
export CROSS=aarch64-linux-gnu-

export RTE_KERNELDIR_OUT=~/test/linux-out
export RTE_KERNELDIR=~/test/linux
cd $RTE_KERNELDIR
make defconfig O=$RTE_KERNELDIR_OUT
make -j 8 O=$RTE_KERNELDIR_OUT

cd ~/test/dpdk
make config T=arm64-stingray-linuxapp-gcc
make

Note:

With this example you will likely hit a few compile errors as latest 
dpdk has compile bugs with unused variables/type mismatches in the code.

Regards,

  Scott


On 18-04-05 11:58 AM, Ajit Khaparde wrote:
> Scott, are you looking at this?
>
> ---------- Forwarded message ----------
> From: *Ferruh Yigit* <ferruh.yigit at intel.com 
> <mailto:ferruh.yigit at intel.com>>
> Date: Tue, Apr 3, 2018 at 7:18 AM
> Subject: Re: [PATCH 3/4] mk: allow kernel artifacts to be located in 
> output directory
> To: Scott Branden <scott.branden at broadcom.com 
> <mailto:scott.branden at broadcom.com>>, Ajit Khaparde 
> <ajit.khaparde at broadcom.com <mailto:ajit.khaparde at broadcom.com>>, 
> dev at dpdk.org <mailto:dev at dpdk.org>
>
>
> On 3/30/2018 7:23 PM, Scott Branden wrote:
> > Hi Ferruh,
> >
> >
> > On 18-03-30 03:35 AM, Ferruh Yigit wrote:
> >> On 3/21/2018 6:06 PM, Ajit Khaparde wrote:
> >>> From: Scott Branden <scott.branden at broadcom.com 
> <mailto:scott.branden at broadcom.com>>
> >>>
> >>> Allow kernel artifacts to be located in output directory specific
> >>> by RTE_KERNELDIR_OUT.
> >> How to use this variable, I tried following but kernel modules are 
> still in same
> >> place:
> > export RTE_KERNELDIR and RTE_KERNELDIR_OUT and it works fine.
> > RTE_KERNELDIR already exists in Makefile.  Are you able to override it?
>
> Please help me a little more, can you please list your commands?
>
> Before your patch, what I do:
>
> export RTE_KERNELDIR=~/development/linux/linux
> make defconfig
> make    <--- After this kernel modules in ./build/kmod/*.ko
> make DESTDIR=/tmp/for-scott install
>
> kernel modules are installed into /tmp/for-scott/lib/modules/`uname
> -r`/extra/dpdk/*.ko
>
> Here `uname -r` is wrong but your patch is not related this.
>
> I am using RTE_KERNELDIR a lot since I am compiling with various kernel
> versions, not seen .ko files goes into source folder, what is your 
> command line?
>
>
>
> Or _after_ your patch:
> export RTE_KERNELDIR=~/development/linux/linux
> export RTE_KERNELDIR_OUT=/tmp/kmod
> make defconfig
> make    <--- After this kernel modules in ./build/kmod/*.ko
>
> Getting following build error:
> /bin/sh: scripts/mod/modpost: No such file or directory
> make[7]: *** [.../development/linux/linux/scripts/Makefile.modpost:92:
> __modpost] Error 127
> make[6]: *** [.../development/linux/linux/Makefile:1558: modules] Error 2
> make[5]: *** [Makefile:146: sub-make] Error 2
> make[4]: *** [../mk/rte.module.mk:54 <http://rte.module.mk:54>: 
> igb_uio.ko] Error 2
>
> Can you please describe how this variable intended to be used?
>
>
> >> - make RTE_KERNELDIR_OUT=/tmp/kmod O=ferruh DESTDIR=/tmp/ferruh
> >> - make RTE_KERNELDIR_OUT=/tmp/kmod O=ferruh DESTDIR=/tmp/ferruh install
> >> - make RTE_KERNELDIR_OUT=/tmp/kmod O=ferruh DESTDIR=/tmp/ferruh 
> modules_install
> >>
> >> /tmp/kmod not created.
> >>
> >> And what we are fixing here, what was wrong with old code?
> > Old code puts the intermediate object files in the kernel source
> > directory.  This doesn't work when building an external module in
> > openembedded recipes.  We need the Makefile change to be able to able to
> > specify the kernel and output directories separately.
> >>
> >>> If RTE_KERNELDIR_OUT not specified than
> >>> source directory RTE_KERNEL is used.
> >> ${RTE_KERNELDIR} is used as external Linux kernel source folder, 
> why we are want
> >> to put artifacts into kernel source?
> > I just kept the default behaviour the same as what it does today.
> >>
> >>> Signed-off-by: Scott Branden <scott.branden at broadcom.com 
> <mailto:scott.branden at broadcom.com>>
> >>> Signed-off-by: Ajit Khaparde <ajit.khaparde at broadcom.com 
> <mailto:ajit.khaparde at broadcom.com>>
> >>> ---
> >>>   mk/rte.module.mk <http://rte.module.mk> | 9 ++++++---
> >>>   1 file changed, 6 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/mk/rte.module.mk <http://rte.module.mk> 
> b/mk/rte.module.mk <http://rte.module.mk>
> >>> index 1ada528a0..e2e1af716 100644
> >>> --- a/mk/rte.module.mk <http://rte.module.mk>
> >>> +++ b/mk/rte.module.mk <http://rte.module.mk>
> >>> @@ -39,6 +39,9 @@ _postinstall: build
> >>>   .PHONY: build
> >>>   build: _postbuild
> >>>
> >>> +# Allow kernel artifacts to be located in a different location 
> that source
> >>> +RTE_KERNELDIR_OUT ?= ${RTE_KERNELDIR}
> >>> +
> >>>   # Link all sources in build directory
> >>>   %_link: FORCE
> >>>     $(if $(call compare,$(notdir $*),$*),\
> >>> @@ -48,7 +51,7 @@ build: _postbuild
> >>>   # build module
> >>>   $(MODULE).ko: $(SRCS_LINKS)
> >>>     @if [ ! -f $(notdir Makefile) ]; then ln -nfs 
> $(SRCDIR)/Makefile . ; fi
> >>> -   @$(MAKE) -C $(RTE_KERNELDIR) M=$(CURDIR) O=$(RTE_KERNELDIR) \
> >>> +   @$(MAKE) -C $(RTE_KERNELDIR) M=$(CURDIR) O=$(RTE_KERNELDIR_OUT) \
> >>>             CC="$(KERNELCC)" CROSS_COMPILE=$(CROSS) V=$(if $V,1,0)
> >>>
> >>>   # install module in $(RTE_OUTPUT)/kmod
> >>> @@ -59,7 +62,7 @@ $(RTE_OUTPUT)/kmod/$(MODULE).ko: $(MODULE).ko
> >>>
> >>>   # install module
> >>>   modules_install:
> >>> -   @$(MAKE) -C $(RTE_KERNELDIR) M=$(CURDIR) O=$(RTE_KERNELDIR) \
> >>> +   @$(MAKE) -C $(RTE_KERNELDIR) M=$(CURDIR) O=$(RTE_KERNELDIR_OUT) \
> >>>             modules_install
> >>>
> >>>   .PHONY: clean
> >>> @@ -69,7 +72,7 @@ clean: _postclean
> >>>   .PHONY: doclean
> >>>   doclean:
> >>>     @if [ ! -f $(notdir Makefile) ]; then ln -nfs 
> $(SRCDIR)/Makefile . ; fi
> >>> -   $(Q)$(MAKE) -C $(RTE_KERNELDIR) M=$(CURDIR) O=$(RTE_KERNELDIR) 
> clean
> >>> +   $(Q)$(MAKE) -C $(RTE_KERNELDIR) M=$(CURDIR) 
> O=$(RTE_KERNELDIR_OUT) clean
> >>>     @$(foreach FILE,$(SRCS-y) $(SRCS-n) $(SRCS-),\
> >>>             if [ -h $(notdir $(FILE)) ]; then rm -f $(notdir 
> $(FILE)) ; fi ;)
> >>>     @if [ -h $(notdir Makefile) ]; then rm -f $(notdir Makefile) ; fi
> >>>
> > Regards,
> >   Scott
> >
>
>