[dpdk-dev] [PATCH v2 4/5] app/testpmd: introduce new tunnel VXLAN-GPE

Adrien Mazarguil adrien.mazarguil at 6wind.com
Wed Apr 11 11:59:41 CEST 2018


On Tue, Apr 10, 2018 at 09:00:35PM +0800, Xueming Li wrote:
> Add VXLAN-GPE support to csum forwarding engine and rte flow.
> 
> Signed-off-by: Xueming Li <xuemingl at mellanox.com>

Depending on whether you chose to impact ABI compatibility in the second
patch of the series, you may need to reorder all VXLAN_GPE definitions in
this patch to match that of the rte_flow API.

A few more comments below.

> ---
>  app/test-pmd/cmdline_flow.c           | 24 ++++++++++
>  app/test-pmd/config.c                 |  2 +
>  app/test-pmd/csumonly.c               | 83 +++++++++++++++++++++++++++++++++--
>  app/test-pmd/parameters.c             | 12 ++++-
>  app/test-pmd/testpmd.h                |  2 +
>  doc/guides/testpmd_app_ug/run_app.rst |  5 +++
>  6 files changed, 124 insertions(+), 4 deletions(-)
> 
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index f85c1c57f..f5abd589d 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -137,6 +137,8 @@ enum index {
>  	ITEM_SCTP_CKSUM,
>  	ITEM_VXLAN,
>  	ITEM_VXLAN_VNI,
> +	ITEM_VXLAN_GPE,
> +	ITEM_VXLAN_GPE_VNI,
>  	ITEM_E_TAG,
>  	ITEM_E_TAG_GRP_ECID_B,
>  	ITEM_NVGRE,
> @@ -461,6 +463,7 @@ static const enum index next_item[] = {
>  	ITEM_TCP,
>  	ITEM_SCTP,
>  	ITEM_VXLAN,
> +	ITEM_VXLAN_GPE,
>  	ITEM_E_TAG,
>  	ITEM_NVGRE,
>  	ITEM_MPLS,
> @@ -589,6 +592,12 @@ static const enum index item_vxlan[] = {
>  	ZERO,
>  };
>  
> +static const enum index item_vxlan_gpe[] = {
> +	ITEM_VXLAN_GPE_VNI,
> +	ITEM_NEXT,
> +	ZERO,
> +};
> +
>  static const enum index item_e_tag[] = {
>  	ITEM_E_TAG_GRP_ECID_B,
>  	ITEM_NEXT,
> @@ -1441,6 +1450,21 @@ static const struct token token_list[] = {
>  		.next = NEXT(item_vxlan, NEXT_ENTRY(UNSIGNED), item_param),
>  		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_vxlan, vni)),
>  	},
> +	[ITEM_VXLAN_GPE] = {
> +		.name = "vxlan-gpe",
> +		.help = "match VXLAN-GPE header",
> +		.priv = PRIV_ITEM(VXLAN_GPE,
> +				  sizeof(struct rte_flow_item_vxlan_gpe)),
> +		.next = NEXT(item_vxlan_gpe),
> +		.call = parse_vc,
> +	},
> +	[ITEM_VXLAN_GPE_VNI] = {
> +		.name = "vni",
> +		.help = "VXLAN-GPE identifier",
> +		.next = NEXT(item_vxlan_gpe, NEXT_ENTRY(UNSIGNED), item_param),
> +		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_vxlan_gpe,
> +					     vni)),
> +	},
>  	[ITEM_E_TAG] = {
>  		.name = "e_tag",
>  		.help = "match E-Tag header",
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 4a273eff7..1a9bc37ed 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -972,6 +972,7 @@ static const struct {
>  	MK_FLOW_ITEM(TCP, sizeof(struct rte_flow_item_tcp)),
>  	MK_FLOW_ITEM(SCTP, sizeof(struct rte_flow_item_sctp)),
>  	MK_FLOW_ITEM(VXLAN, sizeof(struct rte_flow_item_vxlan)),
> +	MK_FLOW_ITEM(VXLAN_GPE, sizeof(struct rte_flow_item_vxlan_gpe)),
>  	MK_FLOW_ITEM(E_TAG, sizeof(struct rte_flow_item_e_tag)),
>  	MK_FLOW_ITEM(NVGRE, sizeof(struct rte_flow_item_nvgre)),
>  	MK_FLOW_ITEM(MPLS, sizeof(struct rte_flow_item_mpls)),

My first comment applies to all the above hunks.

> @@ -3080,6 +3081,7 @@ flowtype_to_str(uint16_t flow_type)
>  		{"l2_payload", RTE_ETH_FLOW_L2_PAYLOAD},
>  		{"port", RTE_ETH_FLOW_PORT},
>  		{"vxlan", RTE_ETH_FLOW_VXLAN},
> +		{"vxlan-gpe", RTE_ETH_FLOW_VXLAN_GPE},
>  		{"geneve", RTE_ETH_FLOW_GENEVE},
>  		{"nvgre", RTE_ETH_FLOW_NVGRE},
>  	};
> diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
> index 5f5ab64aa..213888374 100644
> --- a/app/test-pmd/csumonly.c
> +++ b/app/test-pmd/csumonly.c
> @@ -60,6 +60,8 @@
>  #define _htons(x) (x)
>  #endif
>  
> +uint16_t vxlan_gpe_udp_port = 4790;
> +
>  /* structure that caches offload info for the current packet */
>  struct testpmd_offload_info {
>  	uint16_t ethertype;
> @@ -194,6 +196,70 @@ parse_vxlan(struct udp_hdr *udp_hdr,
>  	info->l2_len += ETHER_VXLAN_HLEN; /* add udp + vxlan */
>  }
>  
> +/* Parse a vxlan-gpe header */
> +static void
> +parse_vxlan_gpe(struct udp_hdr *udp_hdr,
> +	    struct testpmd_offload_info *info)
> +{
> +	struct ether_hdr *eth_hdr;
> +	struct ipv4_hdr *ipv4_hdr;
> +	struct ipv6_hdr *ipv6_hdr;
> +	struct vxlan_gpe_hdr *vxlan_gpe_hdr;
> +	uint8_t vxlan_gpe_len = sizeof(*vxlan_gpe_hdr);
> +
> +	/* check udp destination port, 4790 is the default vxlan-gpe port */
> +	if (udp_hdr->dst_port != _htons(vxlan_gpe_udp_port))
> +		return;
> +
> +	vxlan_gpe_hdr = (struct vxlan_gpe_hdr *)((char *)udp_hdr +
> +				sizeof(struct udp_hdr));
> +
> +	if (!vxlan_gpe_hdr->proto || vxlan_gpe_hdr->proto ==
> +	    VXLAN_GPE_TYPE_IPv4) {
> +		info->is_tunnel = 1;
> +		info->outer_ethertype = info->ethertype;
> +		info->outer_l2_len = info->l2_len;
> +		info->outer_l3_len = info->l3_len;
> +		info->outer_l4_proto = info->l4_proto;
> +
> +		ipv4_hdr = (struct ipv4_hdr *)((char *)vxlan_gpe_hdr +
> +			   vxlan_gpe_len);
> +
> +		parse_ipv4(ipv4_hdr, info);
> +		info->ethertype = _htons(ETHER_TYPE_IPv4);
> +		info->l2_len = 0;
> +
> +	} else if (vxlan_gpe_hdr->proto == VXLAN_GPE_TYPE_IPv6) {
> +		info->is_tunnel = 1;
> +		info->outer_ethertype = info->ethertype;
> +		info->outer_l2_len = info->l2_len;
> +		info->outer_l3_len = info->l3_len;
> +		info->outer_l4_proto = info->l4_proto;
> +
> +		ipv6_hdr = (struct ipv6_hdr *)((char *)vxlan_gpe_hdr +
> +			   vxlan_gpe_len);
> +
> +		info->ethertype = _htons(ETHER_TYPE_IPv6);
> +		parse_ipv6(ipv6_hdr, info);
> +		info->l2_len = 0;
> +
> +	} else if (vxlan_gpe_hdr->proto == VXLAN_GPE_TYPE_ETH) {
> +		info->is_tunnel = 1;
> +		info->outer_ethertype = info->ethertype;
> +		info->outer_l2_len = info->l2_len;
> +		info->outer_l3_len = info->l3_len;
> +		info->outer_l4_proto = info->l4_proto;
> +
> +		eth_hdr = (struct ether_hdr *)((char *)vxlan_gpe_hdr +
> +			  vxlan_gpe_len);
> +
> +		parse_ethernet(eth_hdr, info);
> +	} else
> +		return;
> +
> +	info->l2_len += ETHER_VXLAN_GPE_HLEN;
> +}
> +
>  /* Parse a gre header */
>  static void
>  parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
> @@ -588,6 +654,10 @@ pkt_copy_split(const struct rte_mbuf *pkt)
>   *   Ether / (vlan) / IP|IP6 / UDP|TCP|SCTP .
>   *   Ether / (vlan) / outer IP|IP6 / outer UDP / VxLAN / Ether / IP|IP6 /
>   *           UDP|TCP|SCTP
> + *   Ether / (vlan) / outer IP|IP6 / outer UDP / VXLAN-GPE / Ether / IP|IP6 /
> + *           UDP|TCP|SCTP
> + *   Ether / (vlan) / outer IP|IP6 / outer UDP / VXLAN-GPE / IP|IP6 /
> + *           UDP|TCP|SCTP
>   *   Ether / (vlan) / outer IP|IP6 / GRE / Ether / IP|IP6 / UDP|TCP|SCTP
>   *   Ether / (vlan) / outer IP|IP6 / GRE / IP|IP6 / UDP|TCP|SCTP
>   *   Ether / (vlan) / outer IP|IP6 / IP|IP6 / UDP|TCP|SCTP
> @@ -691,9 +761,16 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
>  
>  				udp_hdr = (struct udp_hdr *)((char *)l3_hdr +
>  					info.l3_len);
> -				parse_vxlan(udp_hdr, &info, m->packet_type);
> -				if (info.is_tunnel)
> -					tx_ol_flags |= PKT_TX_TUNNEL_VXLAN;
> +				parse_vxlan_gpe(udp_hdr, &info);
> +				if (info.is_tunnel) {
> +					tx_ol_flags |= PKT_TX_TUNNEL_VXLAN_GPE;
> +				} else {
> +					parse_vxlan(udp_hdr, &info,
> +						    m->packet_type);
> +					if (info.is_tunnel)
> +						tx_ol_flags |=
> +							PKT_TX_TUNNEL_VXLAN;
> +				}
>  			} else if (info.l4_proto == IPPROTO_GRE) {
>  				struct simple_gre_hdr *gre_hdr;
>  
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> index 2192bdcdf..68063b7a4 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -70,7 +70,7 @@ usage(char* progname)
>  	       "--rss-ip | --rss-udp | "
>  	       "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
>  	       "--txpt= | --txht= | --txwt= | --txfreet= | "
> -	       "--txrst= | --tx-offloads ]\n",
> +	       "--txrst= | --tx-offloads= | --vxlan-gpe-port= ]\n",
>  	       progname);
>  #ifdef RTE_LIBRTE_CMDLINE
>  	printf("  --interactive: run in interactive mode.\n");
> @@ -186,6 +186,7 @@ usage(char* progname)
>  	printf("  --flow-isolate-all: "
>  	       "requests flow API isolated mode on all ports at initialization time.\n");
>  	printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
> +	printf("  --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
>  }
>  
>  #ifdef RTE_LIBRTE_CMDLINE
> @@ -621,6 +622,7 @@ launch_args_parse(int argc, char** argv)
>  		{ "print-event",		1, 0, 0 },
>  		{ "mask-event",			1, 0, 0 },
>  		{ "tx-offloads",		1, 0, 0 },
> +		{ "vxlan-gpe-port",		1, 0, 0 },
>  		{ 0, 0, 0, 0 },
>  	};
>  
> @@ -1091,6 +1093,14 @@ launch_args_parse(int argc, char** argv)
>  					rte_exit(EXIT_FAILURE,
>  						 "tx-offloads must be >= 0\n");
>  			}
> +			if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
> +				n = atoi(optarg);
> +				if (n >= 0)
> +					vxlan_gpe_udp_port = (uint16_t)n;
> +				else
> +					rte_exit(EXIT_FAILURE,
> +						 "vxlan-gpe-port must be >= 0\n");
> +			}
>  			if (!strcmp(lgopts[opt_idx].name, "print-event"))
>  				if (parse_event_printing_config(optarg, 1)) {
>  					rte_exit(EXIT_FAILURE,
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 593ae2160..b270602d9 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -446,6 +446,8 @@ extern uint32_t retry_enabled;
>  extern struct fwd_lcore  **fwd_lcores;
>  extern struct fwd_stream **fwd_streams;
>  
> +extern uint16_t vxlan_gpe_udp_port; /**< UDP port of tunnel VXLAN-GPE. */
> +
>  extern portid_t nb_peer_eth_addrs; /**< Number of peer ethernet addresses. */
>  extern struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
>  
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
> index 1fd53958a..2e8690f41 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -479,3 +479,8 @@ The commandline options are:
>  
>      Set the hexadecimal bitmask of TX queue offloads.
>      The default value is 0.
> +
> +*   ``--vxlan-gpe-port=N``
> +
> +    Set the UDP port number of tunnel VXLAN-GPE to N.
> +    The default value is 4790.

You need to update the "Pattern items" section of the flow command
documentation as well.

> -- 
> 2.13.3
> 

-- 
Adrien Mazarguil
6WIND


More information about the dev mailing list