[dpdk-dev] [PATCH V19 2/4] eal: add failure handler mechanism for hot plug

Guo, Jia jia.guo at intel.com
Wed Apr 11 13:49:09 CEST 2018



On 4/6/2018 10:03 PM, Zhang, Qi Z wrote:
> Hi Jeff:
>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jeff Guo
>> Sent: Friday, April 6, 2018 6:57 PM
>> To: stephen at networkplumber.org; Richardson, Bruce
>> <bruce.richardson at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>;
>> Ananyev, Konstantin <konstantin.ananyev at intel.com>;
>> gaetan.rivet at 6wind.com; Wu, Jingjing <jingjing.wu at intel.com>;
>> thomas at monjalon.net; motih at mellanox.com; Van Haaren, Harry
>> <harry.van.haaren at intel.com>; Tan, Jianfeng <jianfeng.tan at intel.com>
>> Cc: jblunck at infradead.org; shreyansh.jain at nxp.com; dev at dpdk.org; Guo, Jia
>> <jia.guo at intel.com>; Zhang, Helin <helin.zhang at intel.com>
>> Subject: [dpdk-dev] [PATCH V19 2/4] eal: add failure handler mechanism for
>> hot plug
>>
>> This patch introduces an API (rte_dev_handle_hot_unplug) to handle device
>> hot unplug event. When device be hot plug out, the device resource become
>> invalid, if this resource is still be unexpected read/write, system will crash. The
>> api let user register the hot unplug handler, when hot plug failure occur, the
>> working thread will be block until the uevent mechanism successful recovery
>> the memory and guaranty the application keep running smoothly.
>>
>> Signed-off-by: Jeff Guo <jia.guo at intel.com>
>> ---
>> v19->18:
>> add note for limitation of multiple hotplug
>> ---
>>   doc/guides/rel_notes/release_18_05.rst  |   6 ++
>>   kernel/linux/igb_uio/igb_uio.c          |   4 +
>>   lib/librte_eal/common/include/rte_dev.h |  19 +++++
>>   lib/librte_eal/linuxapp/eal/eal_dev.c   | 140
>> +++++++++++++++++++++++++++++++-
>>   lib/librte_eal/rte_eal_version.map      |   1 +
>>   5 files changed, 169 insertions(+), 1 deletion(-)
>>
>> diff --git a/doc/guides/rel_notes/release_18_05.rst
>> b/doc/guides/rel_notes/release_18_05.rst
>> index cb9e050..2707e73 100644
>> --- a/doc/guides/rel_notes/release_18_05.rst
>> +++ b/doc/guides/rel_notes/release_18_05.rst
>> @@ -70,6 +70,12 @@ New Features
>>
>>     Linux uevent is supported as backend of this device event notification
>> framework.
>>
>> +* **Added hot plug failure handler.**
>> +
>> +  Added a failure handler machenism to handle hot unplug device.
>> +
>> +  * ``rte_dev_handle_hot_unplug`` for handle hot unplug device failure.
>> +
>>   API Changes
>>   -----------
>>
>> diff --git a/kernel/linux/igb_uio/igb_uio.c b/kernel/linux/igb_uio/igb_uio.c
>> index 4cae4dd..293c310 100644
>> --- a/kernel/linux/igb_uio/igb_uio.c
>> +++ b/kernel/linux/igb_uio/igb_uio.c
>> @@ -344,6 +344,10 @@ igbuio_pci_release(struct uio_info *info, struct inode
>> *inode)
>>   	struct rte_uio_pci_dev *udev = info->priv;
>>   	struct pci_dev *dev = udev->pdev;
>>
>> +	/* check if device has been remove before release */
>> +	if ((&dev->dev.kobj)->state_remove_uevent_sent == 1)
>> +		return -1;
>> +
>>   	mutex_lock(&udev->lock);
>>   	if (--udev->refcnt > 0) {
>>   		mutex_unlock(&udev->lock);
>> diff --git a/lib/librte_eal/common/include/rte_dev.h
>> b/lib/librte_eal/common/include/rte_dev.h
>> index a5203e7..17c446d 100644
>> --- a/lib/librte_eal/common/include/rte_dev.h
>> +++ b/lib/librte_eal/common/include/rte_dev.h
>> @@ -361,4 +361,23 @@ rte_dev_event_monitor_start(void);
>>    */
>>   int __rte_experimental
>>   rte_dev_event_monitor_stop(void);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change without prior notice
>> + *
>> + * It can be used to register the device signal bus handler, and save
>> +the
>> + * current environment for each thread, when signal bus error invoke,
>> +the
>> + * handler would restore the environment by long jmp to each working
>> + * thread previous locate, then block the thread to waiting until the
>> +memory
>> + * recovery and remapping be finished, that would guaranty the system
>> +not
>> + * crash when the device be hot unplug.
>> + *
>> + * @param none
>> + * @return
>> + *   - From a successful direct invocation, zero.
>> + *   - From a call of siglongjmp(), non_zero.
>> + */
>> +int __rte_experimental
>> +rte_dev_handle_hot_unplug(void);
>>   #endif /* _RTE_DEV_H_ */
>> diff --git a/lib/librte_eal/linuxapp/eal/eal_dev.c
>> b/lib/librte_eal/linuxapp/eal/eal_dev.c
>> index 9478a39..84b7efc 100644
>> --- a/lib/librte_eal/linuxapp/eal/eal_dev.c
>> +++ b/lib/librte_eal/linuxapp/eal/eal_dev.c
>> @@ -4,6 +4,9 @@
>>
>>   #include <string.h>
>>   #include <unistd.h>
>> +#include <signal.h>
>> +#include <setjmp.h>
>> +#include <pthread.h>
>>   #include <sys/socket.h>
>>   #include <linux/netlink.h>
>>
>> @@ -13,12 +16,17 @@
>>   #include <rte_malloc.h>
>>   #include <rte_interrupts.h>
>>   #include <rte_alarm.h>
>> +#include <rte_bus.h>
>> +#include <rte_per_lcore.h>
>>
>>   #include "eal_private.h"
>>
>>   static struct rte_intr_handle intr_handle = {.fd = -1 };  static bool
>> monitor_started;
>>
>> +pthread_mutex_t failure_recovery_lock;
>> +pthread_cond_t failure_recovery_cond;
>> +
>>   #define EAL_UEV_MSG_LEN 4096
>>   #define EAL_UEV_MSG_ELEM_LEN 128
>>
>> @@ -32,6 +40,22 @@ enum eal_dev_event_subsystem {
>>   	EAL_DEV_EVENT_SUBSYSTEM_MAX
>>   };
>>
>> +static RTE_DEFINE_PER_LCORE(sigjmp_buf, unplug_longjmp_env);
>> +
>> +static void sigbus_handler(int signum __rte_unused) {
>> +	RTE_LOG(DEBUG, EAL, "receive SIGBUS error!\n");
>> +	siglongjmp(RTE_PER_LCORE(unplug_longjmp_env), 1); }
>> +
>> +static int cmp_dev_name(const struct rte_device *dev,
>> +	const void *_name)
>> +{
>> +	const char *name = _name;
>> +
>> +	return strcmp(dev->name, name);
>> +}
>> +
>>   static int
>>   dev_uev_socket_fd_create(void)
>>   {
>> @@ -132,6 +156,31 @@ dev_uev_parse(const char *buf, struct rte_dev_event
>> *event, int length)
>>   	return 0;
>>   }
>>
>> +static int
>> +dev_uev_remove_handler(struct rte_device *dev) {
>> +	struct rte_bus *bus = rte_bus_find_by_device_name(dev->name);
>> +	int ret;
>> +
>> +	if (!dev)
>> +		return -1;
>> +
>> +	if (bus->handle_hot_unplug) {
>> +		/**
>> +		 * call bus ops to handle hot unplug.
>> +		 */
>> +		ret = bus->handle_hot_unplug(dev);
>> +		if (ret) {
>> +			RTE_LOG(ERR, EAL,
>> +				"It cannot handle hot unplug for device (%s) "
>> +				"on the bus.\n ",
>> +				dev->name);
>> +			return ret;
>> +		}
>> +	}
>> +	return 0;
>> +}
>> +
>>   static void
>>   dev_delayed_unregister(void *param)
>>   {
>> @@ -146,6 +195,9 @@ dev_uev_handler(__rte_unused void *param)
>>   	struct rte_dev_event uevent;
>>   	int ret;
>>   	char buf[EAL_UEV_MSG_LEN];
>> +	struct rte_bus *bus;
>> +	struct rte_device *dev;
>> +	const char *busname;
>>
>>   	memset(&uevent, 0, sizeof(struct rte_dev_event));
>>   	memset(buf, 0, EAL_UEV_MSG_LEN);
>> @@ -170,11 +222,87 @@ dev_uev_handler(__rte_unused void *param)
>>   	RTE_LOG(DEBUG, EAL, "receive uevent(name:%s, type:%d,
>> subsystem:%d)\n",
>>   		uevent.devname, uevent.type, uevent.subsystem);
>>
>> -	if (uevent.devname)
>> +	switch (uevent.subsystem) {
>> +	case EAL_DEV_EVENT_SUBSYSTEM_PCI:
>> +	case EAL_DEV_EVENT_SUBSYSTEM_UIO:
>> +		busname = "pci";
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +
>> +	if (uevent.devname) {
>> +		if (uevent.type == RTE_DEV_EVENT_REMOVE) {
>> +			bus = rte_bus_find_by_name(busname);
>> +			if (bus == NULL) {
>> +				RTE_LOG(ERR, EAL, "Cannot find bus (%s)\n",
>> +					uevent.devname);
>> +				return;
>> +			}
>> +			dev = bus->find_device(NULL, cmp_dev_name,
>> +					       uevent.devname);
>> +			if (dev == NULL) {
>> +				RTE_LOG(ERR, EAL,
>> +					"Cannot find unplugged device (%s)\n",
>> +					uevent.devname);
>> +				return;
>> +			}
>> +			ret = dev_uev_remove_handler(dev);
>> +			if (ret) {
>> +				RTE_LOG(ERR, EAL, "Driver cannot remap the "
>> +					"device (%s)\n",
>> +					dev->name);
>> +				return;
>> +			}
>> +			/* wake up all the threads */
>> +			pthread_cond_broadcast(&failure_recovery_cond);
>> +		}
>>   		dev_callback_process(uevent.devname, uevent.type);
>> +	}
>>   }
>>
>>   int __rte_experimental
>> +rte_dev_handle_hot_unplug(void)
>> +{
>> +	struct sigaction act;
>> +	sigset_t mask;
>> +	int ret = 0;
>> +
>> +	/* set signal handlers */
>> +	memset(&act, 0x00, sizeof(struct sigaction));
>> +	act.sa_handler = sigbus_handler;
>> +	sigemptyset(&act.sa_mask);
>> +	act.sa_flags = SA_RESTART;
>> +	sigaction(SIGBUS, &act, NULL);
>> +	sigemptyset(&mask);
>> +	sigaddset(&mask, SIGBUS);
>> +	pthread_sigmask(SIG_UNBLOCK, &mask, NULL);
>> +
>> +	ret = sigsetjmp(RTE_PER_LCORE(unplug_longjmp_env), 1);
>> +	if (ret) {
>> +		/*
>> +		 * Waitting for condition variable before failure recovery
>> +		 * finish. Now the limitation is only handle one device
>> +		 * hot plug, for multiple devices hotplug, need check if
>> +		 * the device belong to this working thread, then directly
>> +		 * call memory remaping, unrelated thread just keep going
>> +		 * their work by no interrupt from hotplug.
>> +		 * TODO: multiple device hotplug
>> +		 */
>> +		pthread_mutex_lock(&failure_recovery_lock);
>> +		RTE_LOG(DEBUG, EAL, "begin waiting for the failure handler.\n");
>> +		pthread_cond_wait(&failure_recovery_cond,
>> +					&failure_recovery_lock);
>> +		RTE_LOG(DEBUG, EAL,
>> +		       "come back from waiting for failure handler.\n");
>> +		pthread_mutex_unlock(&failure_recovery_lock);
> I think we should not assume phread_cond_wait always happen before pthread_cond_broadcast,
> It is possible Sigbus just happen before remap in udev remove handler while pthread_cond_wait happens
> after pthread_cond_broadcast, then we will wait forever.
>
> I think we need a flag to sync
> For example:
>
> pthread_mutex_lock(&failure_recovery_lock);
> if ( udev_remove_handle == 0 )
> 	pthread_cond_wait(&failure_recovery_cond, & failure_recovery_lock);
> pthread_remove_handle = 0;
> pthread_mutex_unlock(&failure_recovery_lock);
>
> while at remove handler:
> pthread_mutex_lock(&failure_recovery_lock);
> pthread_remove_handle = 1;
> pthread_cond_signel(&failure_recovery_cond);
> pthread_mutex_unlock(&failure_recovery_lock);
>
>
> Regards
> Qi
>
make sense, so i think that should be find a better way to handler it, 
such as use initiative remap to replace of partitive waiting might be 
better.
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +
>> +int __rte_experimental
>>   rte_dev_event_monitor_start(void)
>>   {
>>   	int ret;
>> @@ -196,6 +324,12 @@ rte_dev_event_monitor_start(void)
>>   		return -1;
>>   	}
>>
>> +	/* initialize mutex and condition variable
>> +	 * to control failure recovery.
>> +	 */
>> +	pthread_mutex_init(&failure_recovery_lock, NULL);
>> +	pthread_cond_init(&failure_recovery_cond, NULL);
>> +
>>   	monitor_started = true;
>>
>>   	return 0;
>> @@ -219,5 +353,9 @@ rte_dev_event_monitor_stop(void)
>>   	close(intr_handle.fd);
>>   	intr_handle.fd = -1;
>>   	monitor_started = false;
>> +
>> +	pthread_cond_destroy(&failure_recovery_cond);
>> +	pthread_mutex_destroy(&failure_recovery_lock);
>> +
>>   	return 0;
>>   }
>> diff --git a/lib/librte_eal/rte_eal_version.map
>> b/lib/librte_eal/rte_eal_version.map
>> index fc5c62a..873ef38 100644
>> --- a/lib/librte_eal/rte_eal_version.map
>> +++ b/lib/librte_eal/rte_eal_version.map
>> @@ -262,5 +262,6 @@ EXPERIMENTAL {
>>   	rte_dev_event_monitor_stop;
>>   	rte_dev_event_callback_register;
>>   	rte_dev_event_callback_unregister;
>> +	rte_dev_handle_hot_unplug;
>>
>>   } DPDK_18.02;
>> --
>> 2.7.4



More information about the dev mailing list