[dpdk-dev] [PATCH v3 2/5] ethdev: introduce new tunnel VXLAN-GPE
Adrien Mazarguil
adrien.mazarguil at 6wind.com
Thu Apr 12 14:01:26 CEST 2018
On Thu, Apr 12, 2018 at 03:33:21PM +0800, Xueming Li wrote:
> VXLAN-GPE enables VXLAN for all protocols. Protocol link:
> https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
>
> Signed-off-by: Xueming Li <xuemingl at mellanox.com>
A couple of remaining minor comments, see below. Once addressed:
Acked-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
> ---
> doc/guides/prog_guide/rte_flow.rst | 12 ++++++++++++
> lib/librte_ether/rte_eth_ctrl.h | 3 ++-
> lib/librte_ether/rte_flow.c | 1 +
> lib/librte_ether/rte_flow.h | 27 +++++++++++++++++++++++++++
> lib/librte_mbuf/rte_mbuf.c | 3 +++
> lib/librte_mbuf/rte_mbuf.h | 1 +
> lib/librte_mbuf/rte_mbuf_ptype.c | 1 +
> lib/librte_mbuf/rte_mbuf_ptype.h | 13 +++++++++++++
> lib/librte_net/rte_ether.h | 25 +++++++++++++++++++++++++
> 9 files changed, 85 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
> index 91dbd61a0..9d92d4e1e 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -1044,6 +1044,18 @@ Matches a GENEVE header.
> - ``rsvd1``: reserved, normally 0x00.
> - Default ``mask`` matches VNI only.
>
> +Item: ``VXLAN-GPE``
> +^^^^^^^^^^^^^^^^^^^
> +
> +Matches a VXLAN-GPE header (draft-ietf-nvo3-vxlan-gpe-05).
> +
> +- ``flags``: normally 0x0C (I and P flag).
Minor nit:
=> - ``flags``: normally 0x0c (I and P flags).
> +- ``rsvd0``: reserved, normally 0x0000.
> +- ``protocol``: protocol type.
> +- ``vni``: VXLAN network identifier.
> +- ``rsvd1``: reserved, normally 0x00.
> +- Default ``mask`` matches VNI only.
> +
> Actions
> ~~~~~~~
>
> diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
> index 668f59acb..5ea8ae24c 100644
> --- a/lib/librte_ether/rte_eth_ctrl.h
> +++ b/lib/librte_ether/rte_eth_ctrl.h
> @@ -54,7 +54,8 @@ extern "C" {
> #define RTE_ETH_FLOW_VXLAN 19 /**< VXLAN protocol based flow */
> #define RTE_ETH_FLOW_GENEVE 20 /**< GENEVE protocol based flow */
> #define RTE_ETH_FLOW_NVGRE 21 /**< NVGRE protocol based flow */
> -#define RTE_ETH_FLOW_MAX 22
> +#define RTE_ETH_FLOW_VXLAN_GPE 22 /**< VXLAN-GPE protocol based flow */
> +#define RTE_ETH_FLOW_MAX 23
>
> /**
> * Feature filter types
> diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
> index 3d8116ebd..58ec80f42 100644
> --- a/lib/librte_ether/rte_flow.c
> +++ b/lib/librte_ether/rte_flow.c
> @@ -55,6 +55,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
> MK_FLOW_ITEM(E_TAG, sizeof(struct rte_flow_item_e_tag)),
> MK_FLOW_ITEM(NVGRE, sizeof(struct rte_flow_item_nvgre)),
> MK_FLOW_ITEM(GENEVE, sizeof(struct rte_flow_item_geneve)),
> + MK_FLOW_ITEM(VXLAN_GPE, sizeof(struct rte_flow_item_vxlan_gpe)),
> };
>
> /** Generate flow_action[] entry. */
> diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
> index bed727df8..fefd69920 100644
> --- a/lib/librte_ether/rte_flow.h
> +++ b/lib/librte_ether/rte_flow.h
> @@ -335,6 +335,13 @@ enum rte_flow_item_type {
> * See struct rte_flow_item_geneve.
> */
> RTE_FLOW_ITEM_TYPE_GENEVE,
> +
> + /**
> + * Matches a VXLAN-GPE header (draft-ietf-nvo3-vxlan-gpe-05).
Draft reference is unnecessary here, it should be provided further down with
the structure definition as for VXLAN.
> + *
> + * See struct rte_flow_item_vxlan_gpe.
> + */
> + RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
> };
>
> /**
> @@ -864,6 +871,26 @@ static const struct rte_flow_item_geneve rte_flow_item_geneve_mask = {
> #endif
>
> /**
> + * RTE_FLOW_ITEM_TYPE_VXLAN_GPE.
> + *
> + * Matches a VXLAN-GPE header.
Here:
=> Matches a VXLAN-GPE header (draft-ietf-nvo3-vxlan-gpe-05).
> + */
> +struct rte_flow_item_vxlan_gpe {
> + uint8_t flags; /**< Normally 0x0c (I and P flag). */
flag => flags
> + uint8_t rsvd0[2]; /**< Reserved, normally 0x0000. */
> + uint8_t protocol; /**< Protocol type. */
> + uint8_t vni[3]; /**< VXLAN identifier. */
> + uint8_t rsvd1; /**< Reserved, normally 0x00. */
> +};
> +
> +/** Default mask for RTE_FLOW_ITEM_TYPE_VXLAN_GPE. */
> +#ifndef __cplusplus
> +static const struct rte_flow_item_vxlan_gpe rte_flow_item_vxlan_gpe_mask = {
> + .vni = "\xff\xff\xff",
> +};
> +#endif
> +
> +/**
> * Matching pattern item definition.
> *
> * A pattern is formed by stacking items starting from the lowest protocol
> diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
> index 091d388d3..dc90379e5 100644
> --- a/lib/librte_mbuf/rte_mbuf.c
> +++ b/lib/librte_mbuf/rte_mbuf.c
> @@ -405,6 +405,7 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask)
> case PKT_TX_TUNNEL_IPIP: return "PKT_TX_TUNNEL_IPIP";
> case PKT_TX_TUNNEL_GENEVE: return "PKT_TX_TUNNEL_GENEVE";
> case PKT_TX_TUNNEL_MPLSINUDP: return "PKT_TX_TUNNEL_MPLSINUDP";
> + case PKT_TX_TUNNEL_VXLAN_GPE: return "PKT_TX_TUNNEL_VXLAN_GPE";
> case PKT_TX_MACSEC: return "PKT_TX_MACSEC";
> case PKT_TX_SEC_OFFLOAD: return "PKT_TX_SEC_OFFLOAD";
> default: return NULL;
> @@ -439,6 +440,8 @@ rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen)
> "PKT_TX_TUNNEL_NONE" },
> { PKT_TX_TUNNEL_MPLSINUDP, PKT_TX_TUNNEL_MASK,
> "PKT_TX_TUNNEL_NONE" },
> + { PKT_TX_TUNNEL_VXLAN_GPE, PKT_TX_TUNNEL_MASK,
> + "PKT_TX_TUNNEL_NONE" },
> { PKT_TX_MACSEC, PKT_TX_MACSEC, NULL },
> { PKT_TX_SEC_OFFLOAD, PKT_TX_SEC_OFFLOAD, NULL },
> };
> diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> index 62740254d..1839cf2ed 100644
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -210,6 +210,7 @@ extern "C" {
> #define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45)
> /**< TX packet with MPLS-in-UDP RFC 7510 header. */
> #define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
> +#define PKT_TX_TUNNEL_VXLAN_GPE (0x6ULL << 45)
> /* add new TX TUNNEL type here */
> #define PKT_TX_TUNNEL_MASK (0xFULL << 45)
>
> diff --git a/lib/librte_mbuf/rte_mbuf_ptype.c b/lib/librte_mbuf/rte_mbuf_ptype.c
> index 1feefacc6..49106c7df 100644
> --- a/lib/librte_mbuf/rte_mbuf_ptype.c
> +++ b/lib/librte_mbuf/rte_mbuf_ptype.c
> @@ -65,6 +65,7 @@ const char *rte_get_ptype_tunnel_name(uint32_t ptype)
> case RTE_PTYPE_TUNNEL_GTPU: return "TUNNEL_GTPU";
> case RTE_PTYPE_TUNNEL_ESP: return "TUNNEL_ESP";
> case RTE_PTYPE_TUNNEL_L2TP: return "TUNNEL_L2TP";
> + case RTE_PTYPE_TUNNEL_VXLAN_GPE: return "TUNNEL_VXLAN_GPE";
> default: return "TUNNEL_UNKNOWN";
> }
> }
> diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h
> index b9a338110..7caf83312 100644
> --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> @@ -423,6 +423,19 @@ extern "C" {
> */
> #define RTE_PTYPE_TUNNEL_L2TP 0x0000a000
> /**
> + * VXLAN-GPE (VXLAN Generic Protocol Extension) tunneling packet type.
> + *
> + * Packet format:
> + * <'ether type'=0x0800
> + * | 'version'=4, 'protocol'=17
> + * | 'destination port'=4790>
> + * or,
> + * <'ether type'=0x86DD
> + * | 'version'=6, 'next header'=17
> + * | 'destination port'=4790>
> + */
> +#define RTE_PTYPE_TUNNEL_VXLAN_GPE 0x0000b000
> +/**
> * Mask of tunneling packet types.
> */
> #define RTE_PTYPE_TUNNEL_MASK 0x0000f000
> diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h
> index a271d1c86..19af00a02 100644
> --- a/lib/librte_net/rte_ether.h
> +++ b/lib/librte_net/rte_ether.h
> @@ -311,6 +311,31 @@ struct vxlan_hdr {
> /**< VXLAN tunnel header length. */
>
> /**
> + * VXLAN-GPE protocol header (draft-ietf-nvo3-vxlan-gpe-05).
> + * Contains the 8-bit flag, 8-bit next-protocol, 24-bit VXLAN Network
> + * Identifier and Reserved fields (16 bits and 8 bits).
> + */
> +struct vxlan_gpe_hdr {
> + uint8_t vx_flags; /**< flag (8). */
> + uint8_t reserved[2]; /**< Reserved (16). */
> + uint8_t proto; /**< next-protocol (8). */
> + uint32_t vx_vni; /**< VNI (24) + Reserved (8). */
> +} __attribute__((__packed__));
> +
> +/* VXLAN-GPE next protocol types */
> +#define VXLAN_GPE_TYPE_IPv4 1 /**< IPv4 Protocol. */
> +#define VXLAN_GPE_TYPE_IPv6 2 /**< IPv6 Protocol. */
I suggest using all-caps macro definitions, i.e.:
#define VXLAN_GPE_TYPE_IPV4 1 /**< IPv4 protocol. */
#define VXLAN_GPE_TYPE_IPV6 2 /**< IPv6 protocol. */
checkpatch users will thank you :)
> +#define VXLAN_GPE_TYPE_ETH 3 /**< Ethernet Protocol. */
> +#define VXLAN_GPE_TYPE_NSH 4 /**< NSH Protocol. */
> +#define VXLAN_GPE_TYPE_MPLS 5 /**< MPLS Protocol. */
> +#define VXLAN_GPE_TYPE_GBP 6 /**< GBP Protocol. */
> +#define VXLAN_GPE_TYPE_VBNG 7 /**< vBNG Protocol. */
> +
> +#define ETHER_VXLAN_GPE_HLEN (sizeof(struct udp_hdr) + \
> + sizeof(struct vxlan_gpe_hdr))
> +/**< VXLAN-GPE tunnel header length. */
> +
> +/**
> * Extract VLAN tag information into mbuf
> *
> * Software version of VLAN stripping
> --
> 2.13.3
>
--
Adrien Mazarguil
6WIND
More information about the dev
mailing list