[dpdk-dev] [PATCH v3 01/14] net/mlx5: support 16 hardware priorities
Nélio Laranjeiro
nelio.laranjeiro at 6wind.com
Fri Apr 13 13:58:35 CEST 2018
Hi Xueming,
Small nips and documentation issues,
On Fri, Apr 13, 2018 at 07:20:10PM +0800, Xueming Li wrote:
> This patch supports new 16 Verbs flow priorities by trying to create a
> simple flow of priority 15. If 16 priorities not available, fallback to
> traditional 8 priorities.
>
> Verb priority mapping:
> 8 priorities >=16 priorities
> Control flow: 4-7 8-15
> User normal flow: 1-3 4-7
> User tunnel flow: 0-2 0-3
There is an overlap between tunnel and normal flows it is expected?
>
> Signed-off-by: Xueming Li <xuemingl at mellanox.com>
> ---
> drivers/net/mlx5/mlx5.c | 18 +++++++
> drivers/net/mlx5/mlx5.h | 5 ++
> drivers/net/mlx5/mlx5_flow.c | 112 +++++++++++++++++++++++++++++++++-------
> drivers/net/mlx5/mlx5_trigger.c | 8 ---
> 4 files changed, 115 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index cfab55897..38118e524 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -197,6 +197,7 @@ mlx5_dev_close(struct rte_eth_dev *dev)
> priv->txqs_n = 0;
> priv->txqs = NULL;
> }
> + mlx5_flow_delete_drop_queue(dev);
> if (priv->pd != NULL) {
> assert(priv->ctx != NULL);
> claim_zero(mlx5_glue->dealloc_pd(priv->pd));
> @@ -612,6 +613,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
> unsigned int mps;
> unsigned int cqe_comp;
> unsigned int tunnel_en = 0;
> + unsigned int verb_priorities = 0;
> int idx;
> int i;
> struct mlx5dv_context attrs_out = {0};
> @@ -993,6 +995,22 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
> mlx5_set_link_up(eth_dev);
> /* Store device configuration on private structure. */
> priv->config = config;
> + /* Create drop queue. */
> + err = mlx5_flow_create_drop_queue(eth_dev);
> + if (err) {
> + DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
> + eth_dev->data->port_id, strerror(rte_errno));
> + goto port_error;
> + }
> + /* Supported Verbs flow priority number detection. */
> + if (verb_priorities == 0)
> + verb_priorities = priv_get_max_verbs_prio(eth_dev);
No more priv*() rename it to mlx5_get_max_verbs_prio()
> + if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
> + DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
> + eth_dev->data->port_id, verb_priorities);
> + goto port_error;
> + }
> + priv->config.max_verb_prio = verb_priorities;
s/verb/verbs/
> continue;
> port_error:
> if (priv)
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index 63b24e6bb..6e4613fe0 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -89,6 +89,7 @@ struct mlx5_dev_config {
> unsigned int rx_vec_en:1; /* Rx vector is enabled. */
> unsigned int mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
> unsigned int vf_nl_en:1; /* Enable Netlink requests in VF mode. */
> + unsigned int max_verb_prio; /* Number of Verb flow priorities. */
> unsigned int tso_max_payload_sz; /* Maximum TCP payload for TSO. */
> unsigned int ind_table_max_size; /* Maximum indirection table size. */
> int txq_inline; /* Maximum packet size for inlining. */
> @@ -105,6 +106,9 @@ enum mlx5_verbs_alloc_type {
> MLX5_VERBS_ALLOC_TYPE_RX_QUEUE,
> };
>
> +/* 8 Verbs priorities. */
> +#define MLX5_VERBS_FLOW_PRIO_8 8
> +
> /**
> * Verbs allocator needs a context to know in the callback which kind of
> * resources it is allocating.
> @@ -253,6 +257,7 @@ int mlx5_traffic_restart(struct rte_eth_dev *dev);
>
> /* mlx5_flow.c */
>
> +unsigned int priv_get_max_verbs_prio(struct rte_eth_dev *dev);
> int mlx5_flow_validate(struct rte_eth_dev *dev,
> const struct rte_flow_attr *attr,
> const struct rte_flow_item items[],
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index 288610620..5c4f0b586 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -32,8 +32,8 @@
> #include "mlx5_prm.h"
> #include "mlx5_glue.h"
>
> -/* Define minimal priority for control plane flows. */
> -#define MLX5_CTRL_FLOW_PRIORITY 4
> +/* Flow priority for control plane flows. */
> +#define MLX5_CTRL_FLOW_PRIORITY 1
>
> /* Internet Protocol versions. */
> #define MLX5_IPV4 4
> @@ -129,7 +129,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> IBV_RX_HASH_SRC_PORT_TCP |
> IBV_RX_HASH_DST_PORT_TCP),
> .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_TCP,
> - .flow_priority = 1,
> + .flow_priority = 0,
> .ip_version = MLX5_IPV4,
> },
> [HASH_RXQ_UDPV4] = {
> @@ -138,7 +138,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> IBV_RX_HASH_SRC_PORT_UDP |
> IBV_RX_HASH_DST_PORT_UDP),
> .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_UDP,
> - .flow_priority = 1,
> + .flow_priority = 0,
> .ip_version = MLX5_IPV4,
> },
> [HASH_RXQ_IPV4] = {
> @@ -146,7 +146,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> IBV_RX_HASH_DST_IPV4),
> .dpdk_rss_hf = (ETH_RSS_IPV4 |
> ETH_RSS_FRAG_IPV4),
> - .flow_priority = 2,
> + .flow_priority = 1,
> .ip_version = MLX5_IPV4,
> },
> [HASH_RXQ_TCPV6] = {
> @@ -155,7 +155,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> IBV_RX_HASH_SRC_PORT_TCP |
> IBV_RX_HASH_DST_PORT_TCP),
> .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_TCP,
> - .flow_priority = 1,
> + .flow_priority = 0,
> .ip_version = MLX5_IPV6,
> },
> [HASH_RXQ_UDPV6] = {
> @@ -164,7 +164,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
> IBV_RX_HASH_SRC_PORT_UDP |
> IBV_RX_HASH_DST_PORT_UDP),
> .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_UDP,
> - .flow_priority = 1,
> + .flow_priority = 0,
> .ip_version = MLX5_IPV6,
> },
> [HASH_RXQ_IPV6] = {
> @@ -172,13 +172,13 @@ const struct hash_rxq_init hash_rxq_init[] = {
> IBV_RX_HASH_DST_IPV6),
> .dpdk_rss_hf = (ETH_RSS_IPV6 |
> ETH_RSS_FRAG_IPV6),
> - .flow_priority = 2,
> + .flow_priority = 1,
> .ip_version = MLX5_IPV6,
> },
> [HASH_RXQ_ETH] = {
> .hash_fields = 0,
> .dpdk_rss_hf = 0,
> - .flow_priority = 3,
> + .flow_priority = 2,
> },
> };
>
> @@ -900,30 +900,50 @@ mlx5_flow_convert_allocate(unsigned int size, struct rte_flow_error *error)
> * Make inner packet matching with an higher priority from the non Inner
> * matching.
> *
> + * @param dev
> + * Pointer to Ethernet device.
> * @param[in, out] parser
> * Internal parser structure.
> * @param attr
> * User flow attribute.
> */
> static void
> -mlx5_flow_update_priority(struct mlx5_flow_parse *parser,
> +mlx5_flow_update_priority(struct rte_eth_dev *dev,
> + struct mlx5_flow_parse *parser,
> const struct rte_flow_attr *attr)
> {
> + struct priv *priv = dev->data->dev_private;
> unsigned int i;
> + uint16_t priority;
>
> + /* 8 priorities >= 16 priorities
> + * Control flow: 4-7 8-15
> + * User normal flow: 1-3 4-7
> + * User tunnel flow: 0-2 0-3
> + */
Same comment here, the tunnel flow overlap when there are only 8
priorities.
> + priority = attr->priority * MLX5_VERBS_FLOW_PRIO_8;
> + if (priv->config.max_verb_prio == MLX5_VERBS_FLOW_PRIO_8)
> + priority /= 2;
> + /*
> + * Lower non-tunnel flow Verbs priority 1 if only support 8 Verbs
> + * priorities, lower 4 otherwise.
> + */
> + if (!parser->inner) {
> + if (priv->config.max_verb_prio == MLX5_VERBS_FLOW_PRIO_8)
> + priority += 1;
> + else
> + priority += MLX5_VERBS_FLOW_PRIO_8 / 2;
> + }
> if (parser->drop) {
> - parser->queue[HASH_RXQ_ETH].ibv_attr->priority =
> - attr->priority +
> - hash_rxq_init[HASH_RXQ_ETH].flow_priority;
> + parser->queue[HASH_RXQ_ETH].ibv_attr->priority = priority +
> + hash_rxq_init[HASH_RXQ_ETH].flow_priority;
> return;
> }
> for (i = 0; i != hash_rxq_init_n; ++i) {
> - if (parser->queue[i].ibv_attr) {
> - parser->queue[i].ibv_attr->priority =
> - attr->priority +
> - hash_rxq_init[i].flow_priority -
> - (parser->inner ? 1 : 0);
> - }
> + if (!parser->queue[i].ibv_attr)
> + continue;
> + parser->queue[i].ibv_attr->priority = priority +
> + hash_rxq_init[i].flow_priority;
> }
> }
>
> @@ -1158,7 +1178,7 @@ mlx5_flow_convert(struct rte_eth_dev *dev,
> */
> if (!parser->drop)
> mlx5_flow_convert_finalise(parser);
> - mlx5_flow_update_priority(parser, attr);
> + mlx5_flow_update_priority(dev, parser, attr);
> exit_free:
> /* Only verification is expected, all resources should be released. */
> if (!parser->create) {
> @@ -3161,3 +3181,55 @@ mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
> }
> return 0;
> }
> +
> +/**
> + * Detect number of Verbs flow priorities supported.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + *
> + * @return
> + * number of supported Verbs flow priority.
> + */
> +unsigned int
> +priv_get_max_verbs_prio(struct rte_eth_dev *dev)
> +{
> + struct priv *priv = dev->data->dev_private;
> + unsigned int verb_priorities = MLX5_VERBS_FLOW_PRIO_8;
> + struct {
> + struct ibv_flow_attr attr;
> + struct ibv_flow_spec_eth eth;
> + struct ibv_flow_spec_action_drop drop;
> + } flow_attr = {
> + .attr = {
> + .num_of_specs = 2,
> + },
> + .eth = {
> + .type = IBV_FLOW_SPEC_ETH,
> + .size = sizeof(struct ibv_flow_spec_eth),
> + },
> + .drop = {
> + .size = sizeof(struct ibv_flow_spec_action_drop),
> + .type = IBV_FLOW_SPEC_ACTION_DROP,
> + },
> + };
> + struct ibv_flow *flow;
> +
> + do {
> + flow_attr.attr.priority = verb_priorities - 1;
> + flow = mlx5_glue->create_flow(priv->flow_drop_queue->qp,
> + &flow_attr.attr);
> + if (flow) {
> + claim_zero(mlx5_glue->destroy_flow(flow));
> + /* Try more priorities. */
> + verb_priorities *= 2;
> + } else {
> + /* Failed, restore last right number. */
> + verb_priorities /= 2;
> + break;
> + }
> + } while (1);
> + DRV_LOG(INFO, "port %u Verbs flow priorities: %d",
> + dev->data->port_id, verb_priorities);
Please remove this developer log, it will confuse the user who will
believe he have N priorities which is absolutely not the case.
> + return verb_priorities;
> +}
> diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
> index 6bb4ffb14..d80a2e688 100644
> --- a/drivers/net/mlx5/mlx5_trigger.c
> +++ b/drivers/net/mlx5/mlx5_trigger.c
> @@ -148,12 +148,6 @@ mlx5_dev_start(struct rte_eth_dev *dev)
> int ret;
>
> dev->data->dev_started = 1;
> - ret = mlx5_flow_create_drop_queue(dev);
> - if (ret) {
> - DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
> - dev->data->port_id, strerror(rte_errno));
> - goto error;
> - }
> DRV_LOG(DEBUG, "port %u allocating and configuring hash Rx queues",
> dev->data->port_id);
> rte_mempool_walk(mlx5_mp2mr_iter, priv);
> @@ -202,7 +196,6 @@ mlx5_dev_start(struct rte_eth_dev *dev)
> mlx5_traffic_disable(dev);
> mlx5_txq_stop(dev);
> mlx5_rxq_stop(dev);
> - mlx5_flow_delete_drop_queue(dev);
> rte_errno = ret; /* Restore rte_errno. */
> return -rte_errno;
> }
> @@ -237,7 +230,6 @@ mlx5_dev_stop(struct rte_eth_dev *dev)
> mlx5_rxq_stop(dev);
> for (mr = LIST_FIRST(&priv->mr); mr; mr = LIST_FIRST(&priv->mr))
> mlx5_mr_release(mr);
> - mlx5_flow_delete_drop_queue(dev);
> }
>
> /**
> --
> 2.13.3
Thanks,
--
Nélio Laranjeiro
6WIND
More information about the dev
mailing list