[dpdk-dev] [PATCH v4 16/16] ethdev: add port ID item and action to flow API

Adrien Mazarguil adrien.mazarguil at 6wind.com
Mon Apr 16 18:23:00 CEST 2018


RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.

This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).

The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.

These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.

This breaks ABI compatibility for the following public functions:

- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()

Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang at intel.com>
Acked-by: Andrew Rybchenko <arybchenko at solarflare.com>
Cc: "Zhang, Qi Z" <qi.z.zhang at intel.com>
Cc: Declan Doherty <declan.doherty at intel.com>

---

This patch provides the same functionality and supersedes Qi Zhang's
"ether: add flow action to redirect packet to a port" [1].

The main differences are:

- Action is named PORT_ID instead of PORT.
- Addition of a PORT_ID pattern item.
- More extensive documentation.
- Testpmd support.
- rte_flow_copy() support.

[1] http://dpdk.org/ml/archives/dev/2018-April/094648.html
---
 app/test-pmd/cmdline_flow.c                 | 57 ++++++++++++++++++++++++
 app/test-pmd/config.c                       |  2 +
 doc/guides/prog_guide/rte_flow.rst          | 48 ++++++++++++++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  9 ++++
 lib/librte_ether/rte_flow.c                 |  2 +
 lib/librte_ether/rte_flow.h                 | 56 +++++++++++++++++++++++
 6 files changed, 174 insertions(+)

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 356714801..32fe6645a 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -89,6 +89,8 @@ enum index {
 	ITEM_VF_ID,
 	ITEM_PHY_PORT,
 	ITEM_PHY_PORT_INDEX,
+	ITEM_PORT_ID,
+	ITEM_PORT_ID_ID,
 	ITEM_RAW,
 	ITEM_RAW_RELATIVE,
 	ITEM_RAW_SEARCH,
@@ -185,6 +187,9 @@ enum index {
 	ACTION_PHY_PORT,
 	ACTION_PHY_PORT_ORIGINAL,
 	ACTION_PHY_PORT_INDEX,
+	ACTION_PORT_ID,
+	ACTION_PORT_ID_ORIGINAL,
+	ACTION_PORT_ID_ID,
 	ACTION_METER,
 	ACTION_METER_ID,
 };
@@ -445,6 +450,7 @@ static const enum index next_item[] = {
 	ITEM_PF,
 	ITEM_VF,
 	ITEM_PHY_PORT,
+	ITEM_PORT_ID,
 	ITEM_RAW,
 	ITEM_ETH,
 	ITEM_VLAN,
@@ -491,6 +497,12 @@ static const enum index item_phy_port[] = {
 	ZERO,
 };
 
+static const enum index item_port_id[] = {
+	ITEM_PORT_ID_ID,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index item_raw[] = {
 	ITEM_RAW_RELATIVE,
 	ITEM_RAW_SEARCH,
@@ -627,6 +639,7 @@ static const enum index next_action[] = {
 	ACTION_PF,
 	ACTION_VF,
 	ACTION_PHY_PORT,
+	ACTION_PORT_ID,
 	ACTION_METER,
 	ZERO,
 };
@@ -668,6 +681,13 @@ static const enum index action_phy_port[] = {
 	ZERO,
 };
 
+static const enum index action_port_id[] = {
+	ACTION_PORT_ID_ORIGINAL,
+	ACTION_PORT_ID_ID,
+	ACTION_NEXT,
+	ZERO,
+};
+
 static const enum index action_meter[] = {
 	ACTION_METER_ID,
 	ACTION_NEXT,
@@ -1084,6 +1104,20 @@ static const struct token token_list[] = {
 		.next = NEXT(item_phy_port, NEXT_ENTRY(UNSIGNED), item_param),
 		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_phy_port, index)),
 	},
+	[ITEM_PORT_ID] = {
+		.name = "port_id",
+		.help = "match traffic from/to a given DPDK port ID",
+		.priv = PRIV_ITEM(PORT_ID,
+				  sizeof(struct rte_flow_item_port_id)),
+		.next = NEXT(item_port_id),
+		.call = parse_vc,
+	},
+	[ITEM_PORT_ID_ID] = {
+		.name = "id",
+		.help = "DPDK port ID",
+		.next = NEXT(item_port_id, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_port_id, id)),
+	},
 	[ITEM_RAW] = {
 		.name = "raw",
 		.help = "match an arbitrary byte string",
@@ -1749,6 +1783,29 @@ static const struct token token_list[] = {
 					index)),
 		.call = parse_vc_conf,
 	},
+	[ACTION_PORT_ID] = {
+		.name = "port_id",
+		.help = "direct matching traffic to a given DPDK port ID",
+		.priv = PRIV_ACTION(PORT_ID,
+				    sizeof(struct rte_flow_action_port_id)),
+		.next = NEXT(action_port_id),
+		.call = parse_vc,
+	},
+	[ACTION_PORT_ID_ORIGINAL] = {
+		.name = "original",
+		.help = "use original DPDK port ID if possible",
+		.next = NEXT(action_port_id, NEXT_ENTRY(BOOLEAN)),
+		.args = ARGS(ARGS_ENTRY_BF(struct rte_flow_action_port_id,
+					   original, 1)),
+		.call = parse_vc_conf,
+	},
+	[ACTION_PORT_ID_ID] = {
+		.name = "id",
+		.help = "DPDK port ID",
+		.next = NEXT(action_port_id, NEXT_ENTRY(UNSIGNED)),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_action_port_id, id)),
+		.call = parse_vc_conf,
+	},
 	[ACTION_METER] = {
 		.name = "meter",
 		.help = "meter the directed packets at given id",
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 2d68f1fb0..e7026011b 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -977,6 +977,7 @@ static const struct {
 	MK_FLOW_ITEM(PF, 0),
 	MK_FLOW_ITEM(VF, sizeof(struct rte_flow_item_vf)),
 	MK_FLOW_ITEM(PHY_PORT, sizeof(struct rte_flow_item_phy_port)),
+	MK_FLOW_ITEM(PORT_ID, sizeof(struct rte_flow_item_port_id)),
 	MK_FLOW_ITEM(RAW, sizeof(struct rte_flow_item_raw)),
 	MK_FLOW_ITEM(ETH, sizeof(struct rte_flow_item_eth)),
 	MK_FLOW_ITEM(VLAN, sizeof(struct rte_flow_item_vlan)),
@@ -1075,6 +1076,7 @@ static const struct {
 	MK_FLOW_ACTION(PF, 0),
 	MK_FLOW_ACTION(VF, sizeof(struct rte_flow_action_vf)),
 	MK_FLOW_ACTION(PHY_PORT, sizeof(struct rte_flow_action_phy_port)),
+	MK_FLOW_ACTION(PORT_ID, sizeof(struct rte_flow_action_port_id)),
 	MK_FLOW_ACTION(METER, sizeof(struct rte_flow_action_meter)),
 };
 
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index a39c1e1b0..2fb8e9c3f 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -617,6 +617,36 @@ associated with a port_id should be retrieved by other means.
    | ``mask`` | ``index`` | zeroed to match any port index |
    +----------+-----------+--------------------------------+
 
+Item: ``PORT_ID``
+^^^^^^^^^^^^^^^^^
+
+Matches traffic originating from (ingress) or going to (egress) a given DPDK
+port ID.
+
+Normally only supported if the port ID in question is known by the
+underlying PMD and related to the device the flow rule is created against.
+
+This must not be confused with `Item: PHY_PORT`_ which refers to the
+physical port of a device, whereas `Item: PORT_ID`_ refers to a ``struct
+rte_eth_dev`` object on the application side (also known as "port
+representor" depending on the kind of underlying device).
+
+- Default ``mask`` matches the specified DPDK port ID.
+
+.. _table_rte_flow_item_port_id:
+
+.. table:: PORT_ID
+
+   +----------+----------+-----------------------------+
+   | Field    | Subfield | Value                       |
+   +==========+==========+=============================+
+   | ``spec`` | ``id``   | DPDK port ID                |
+   +----------+----------+-----------------------------+
+   | ``last`` | ``id``   | upper range value           |
+   +----------+----------+-----------------------------+
+   | ``mask`` | ``id``   | zeroed to match any port ID |
+   +----------+----------+-----------------------------+
+
 Data matching item types
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1453,6 +1483,24 @@ See `Item: PHY_PORT`_.
    | ``index``    | physical port index                 |
    +--------------+-------------------------------------+
 
+Action: ``PORT_ID``
+^^^^^^^^^^^^^^^^^^^
+Directs matching traffic to a given DPDK port ID.
+
+See `Item: PORT_ID`_.
+
+.. _table_rte_flow_action_port_id:
+
+.. table:: PORT_ID
+
+   +--------------+---------------------------------------+
+   | Field        | Value                                 |
+   +==============+=======================================+
+   | ``original`` | use original DPDK port ID if possible |
+   +--------------+---------------------------------------+
+   | ``id``       | DPDK port ID                          |
+   +--------------+---------------------------------------+
+
 Action: ``METER``
 ^^^^^^^^^^^^^^^^^
 
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 64d8dfddb..bfb5ad027 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3212,6 +3212,10 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``index {unsigned}``: physical port index.
 
+- ``port_id``: match traffic from/to a given DPDK port ID.
+
+  - ``id {unsigned}``: DPDK port ID.
+
 - ``raw``: match an arbitrary byte string.
 
   - ``relative {boolean}``: look for pattern after the previous item.
@@ -3428,6 +3432,11 @@ This section lists supported actions and their attributes, if any.
   - ``original {boolean}``: use original port index if possible.
   - ``index {unsigned}``: physical port index.
 
+- ``port_id``: direct matching traffic to a given DPDK port ID.
+
+  - ``original {boolean}``: use original DPDK port ID if possible.
+  - ``id {unsigned}``: DPDK port ID.
+
 Destroying flow rules
 ~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
index 00989c73b..cecab59f6 100644
--- a/lib/librte_ether/rte_flow.c
+++ b/lib/librte_ether/rte_flow.c
@@ -39,6 +39,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(PF, 0),
 	MK_FLOW_ITEM(VF, sizeof(struct rte_flow_item_vf)),
 	MK_FLOW_ITEM(PHY_PORT, sizeof(struct rte_flow_item_phy_port)),
+	MK_FLOW_ITEM(PORT_ID, sizeof(struct rte_flow_item_port_id)),
 	MK_FLOW_ITEM(RAW, sizeof(struct rte_flow_item_raw)),
 	MK_FLOW_ITEM(ETH, sizeof(struct rte_flow_item_eth)),
 	MK_FLOW_ITEM(VLAN, sizeof(struct rte_flow_item_vlan)),
@@ -77,6 +78,7 @@ static const struct rte_flow_desc_data rte_flow_desc_action[] = {
 	MK_FLOW_ACTION(PF, 0),
 	MK_FLOW_ACTION(VF, sizeof(struct rte_flow_action_vf)),
 	MK_FLOW_ACTION(PHY_PORT, sizeof(struct rte_flow_action_phy_port)),
+	MK_FLOW_ACTION(PORT_ID, sizeof(struct rte_flow_action_port_id)),
 };
 
 static int
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index 58b75e934..09a21e531 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -180,6 +180,16 @@ enum rte_flow_item_type {
 	RTE_FLOW_ITEM_TYPE_PHY_PORT,
 
 	/**
+	 * [META]
+	 *
+	 * Matches traffic originating from (ingress) or going to (egress) a
+	 * given DPDK port ID.
+	 *
+	 * See struct rte_flow_item_port_id.
+	 */
+	RTE_FLOW_ITEM_TYPE_PORT_ID,
+
+	/**
 	 * Matches a byte string of a given length at a given offset.
 	 *
 	 * See struct rte_flow_item_raw.
@@ -414,6 +424,32 @@ static const struct rte_flow_item_phy_port rte_flow_item_phy_port_mask = {
 #endif
 
 /**
+ * RTE_FLOW_ITEM_TYPE_PORT_ID
+ *
+ * Matches traffic originating from (ingress) or going to (egress) a given
+ * DPDK port ID.
+ *
+ * Normally only supported if the port ID in question is known by the
+ * underlying PMD and related to the device the flow rule is created
+ * against.
+ *
+ * This must not be confused with @p PHY_PORT which refers to the physical
+ * port of a device, whereas @p PORT_ID refers to a struct rte_eth_dev
+ * object on the application side (also known as "port representor"
+ * depending on the kind of underlying device).
+ */
+struct rte_flow_item_port_id {
+	uint32_t id; /**< DPDK port ID. */
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_PORT_ID. */
+#ifndef __cplusplus
+static const struct rte_flow_item_port_id rte_flow_item_port_id_mask = {
+	.id = 0xffffffff,
+};
+#endif
+
+/**
  * RTE_FLOW_ITEM_TYPE_RAW
  *
  * Matches a byte string of a given length at a given offset.
@@ -997,6 +1033,13 @@ enum rte_flow_action_type {
 	RTE_FLOW_ACTION_TYPE_PHY_PORT,
 
 	/**
+	 * Directs matching traffic to a given DPDK port ID.
+	 *
+	 * See struct rte_flow_action_port_id.
+	 */
+	RTE_FLOW_ACTION_TYPE_PORT_ID,
+
+	/**
 	 * Traffic metering and policing (MTR).
 	 *
 	 * See struct rte_flow_action_meter.
@@ -1134,6 +1177,19 @@ struct rte_flow_action_phy_port {
 };
 
 /**
+ * RTE_FLOW_ACTION_TYPE_PORT_ID
+ *
+ * Directs matching traffic to a given DPDK port ID.
+ *
+ * @see RTE_FLOW_ITEM_TYPE_PORT_ID
+ */
+struct rte_flow_action_port_id {
+	uint32_t original:1; /**< Use original DPDK port ID if possible. */
+	uint32_t reserved:31; /**< Reserved, must be zero. */
+	uint32_t id; /**< DPDK port ID. */
+};
+
+/**
  * RTE_FLOW_ACTION_TYPE_METER
  *
  * Traffic metering and policing (MTR).
-- 
2.11.0


More information about the dev mailing list