[dpdk-dev] [PATCH v5 1/2] mbuf: support attaching external buffer to mbuf

Ananyev, Konstantin konstantin.ananyev at intel.com
Wed Apr 25 15:31:42 CEST 2018


> 
> This patch introduces a new way of attaching an external buffer to a mbuf.
> 
> Attaching an external buffer is quite similar to mbuf indirection in
> replacing buffer addresses and length of a mbuf, but a few differences:
>   - When an indirect mbuf is attached, refcnt of the direct mbuf would be
>     2 as long as the direct mbuf itself isn't freed after the attachment.
>     In such cases, the buffer area of a direct mbuf must be read-only. But
>     external buffer has its own refcnt and it starts from 1. Unless
>     multiple mbufs are attached to a mbuf having an external buffer, the
>     external buffer is writable.
>   - There's no need to allocate buffer from a mempool. Any buffer can be
>     attached with appropriate free callback.
>   - Smaller metadata is required to maintain shared data such as refcnt.
> 
> Signed-off-by: Yongseok Koh <yskoh at mellanox.com>
> ---
> 
> ** This patch can pass the mbuf_autotest. **
> 
> Submitting only non-mlx5 patches to meet deadline for RC1. mlx5 patches
> will be submitted separately rebased on a differnet patchset which
> accommodates new memory hotplug design to mlx PMDs.
> 
> v5:
> * rte_pktmbuf_attach_extbuf() sets headroom to 0.
> * if shinfo is provided when attaching, user should initialize it.
> * minor changes from review.
> 
> v4:
> * rte_pktmbuf_attach_extbuf() takes new arguments - buf_iova and shinfo.
>   user can pass memory for shared data via shinfo argument.
> * minor changes from review.
> 
> v3:
> * implement external buffer attachment instead of introducing buf_off for
>   mbuf indirection.
> 
>  lib/librte_mbuf/rte_mbuf.h | 303 ++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 274 insertions(+), 29 deletions(-)
> 
> diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> index 43aaa9c5f..e2c12874a 100644
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -344,7 +344,10 @@ extern "C" {
>  		PKT_TX_MACSEC |		 \
>  		PKT_TX_SEC_OFFLOAD)
> 
> -#define __RESERVED           (1ULL << 61) /**< reserved for future mbuf use */
> +/**
> + * Mbuf having an external buffer attached. shinfo in mbuf must be filled.
> + */
> +#define EXT_ATTACHED_MBUF    (1ULL << 61)
> 
>  #define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
> 
> @@ -584,8 +587,27 @@ struct rte_mbuf {
>  	/** Sequence number. See also rte_reorder_insert(). */
>  	uint32_t seqn;
> 
> +	/** Shared data for external buffer attached to mbuf. See
> +	 * rte_pktmbuf_attach_extbuf().
> +	 */
> +	struct rte_mbuf_ext_shared_info *shinfo;
> +
>  } __rte_cache_aligned;
> 
> +/**
> + * Function typedef of callback to free externally attached buffer.
> + */
> +typedef void (*rte_mbuf_extbuf_free_callback_t)(void *addr, void *opaque);
> +
> +/**
> + * Shared data at the end of an external buffer.
> + */
> +struct rte_mbuf_ext_shared_info {
> +	rte_mbuf_extbuf_free_callback_t free_cb; /**< Free callback function */
> +	void *fcb_opaque;                        /**< Free callback argument */
> +	rte_atomic16_t refcnt_atomic;        /**< Atomically accessed refcnt */
> +};
> +
>  /**< Maximum number of nb_segs allowed. */
>  #define RTE_MBUF_MAX_NB_SEGS	UINT16_MAX
> 
> @@ -706,14 +728,33 @@ rte_mbuf_to_baddr(struct rte_mbuf *md)
>  }
> 
>  /**
> + * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
> + * otherwise.
> + *
> + * If a mbuf has its data in another mbuf and references it by mbuf
> + * indirection, this mbuf can be defined as a cloned mbuf.
> + */
> +#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
> +
> +/**
>   * Returns TRUE if given mbuf is indirect, or FALSE otherwise.
>   */
> -#define RTE_MBUF_INDIRECT(mb)   ((mb)->ol_flags & IND_ATTACHED_MBUF)
> +#define RTE_MBUF_INDIRECT(mb)   RTE_MBUF_CLONED(mb)
> +
> +/**
> + * Returns TRUE if given mbuf has an external buffer, or FALSE otherwise.
> + *
> + * External buffer is a user-provided anonymous buffer.
> + */
> +#define RTE_MBUF_HAS_EXTBUF(mb) ((mb)->ol_flags & EXT_ATTACHED_MBUF)
> 
>  /**
>   * Returns TRUE if given mbuf is direct, or FALSE otherwise.
> + *
> + * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
> + * can be defined as a direct mbuf.
>   */
> -#define RTE_MBUF_DIRECT(mb)     (!RTE_MBUF_INDIRECT(mb))
> +#define RTE_MBUF_DIRECT(mb) (!(RTE_MBUF_CLONED(mb) || RTE_MBUF_HAS_EXTBUF(mb)))
> 
>  /**
>   * Private data in case of pktmbuf pool.
> @@ -839,6 +880,58 @@ rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value)
> 
>  #endif /* RTE_MBUF_REFCNT_ATOMIC */
> 
> +/**
> + * Reads the refcnt of an external buffer.
> + *
> + * @param shinfo
> + *   Shared data of the external buffer.
> + * @return
> + *   Reference count number.
> + */
> +static inline uint16_t
> +rte_mbuf_ext_refcnt_read(const struct rte_mbuf_ext_shared_info *shinfo)
> +{
> +	return (uint16_t)(rte_atomic16_read(&shinfo->refcnt_atomic));
> +}
> +
> +/**
> + * Set refcnt of an external buffer.
> + *
> + * @param shinfo
> + *   Shared data of the external buffer.
> + * @param new_value
> + *   Value set
> + */
> +static inline void
> +rte_mbuf_ext_refcnt_set(struct rte_mbuf_ext_shared_info *shinfo,
> +	uint16_t new_value)
> +{
> +	rte_atomic16_set(&shinfo->refcnt_atomic, new_value);
> +}
> +
> +/**
> + * Add given value to refcnt of an external buffer and return its new
> + * value.
> + *
> + * @param shinfo
> + *   Shared data of the external buffer.
> + * @param value
> + *   Value to add/subtract
> + * @return
> + *   Updated value
> + */
> +static inline uint16_t
> +rte_mbuf_ext_refcnt_update(struct rte_mbuf_ext_shared_info *shinfo,
> +	int16_t value)
> +{
> +	if (likely(rte_mbuf_ext_refcnt_read(shinfo) == 1)) {
> +		rte_mbuf_ext_refcnt_set(shinfo, 1 + value);
> +		return 1 + value;
> +	}
> +
> +	return (uint16_t)rte_atomic16_add_return(&shinfo->refcnt_atomic, value);
> +}
> +
>  /** Mbuf prefetch */
>  #define RTE_MBUF_PREFETCH_TO_FREE(m) do {       \
>  	if ((m) != NULL)                        \
> @@ -1213,11 +1306,127 @@ static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
>  }
> 
>  /**
> + * Attach an external buffer to a mbuf.
> + *
> + * User-managed anonymous buffer can be attached to an mbuf. When attaching
> + * it, corresponding free callback function and its argument should be
> + * provided. This callback function will be called once all the mbufs are
> + * detached from the buffer.
> + *
> + * The headroom for the attaching mbuf will be set to zero and this can be
> + * properly adjusted after attachment. For example, ``rte_pktmbuf_adj()``
> + * or ``rte_pktmbuf_reset_headroom()`` can be used.
> + *
> + * More mbufs can be attached to the same external buffer by
> + * ``rte_pktmbuf_attach()`` once the external buffer has been attached by
> + * this API.
> + *
> + * Detachment can be done by either ``rte_pktmbuf_detach_extbuf()`` or
> + * ``rte_pktmbuf_detach()``.
> + *
> + * Attaching an external buffer is quite similar to mbuf indirection in
> + * replacing buffer addresses and length of a mbuf, but a few differences:
> + * - When an indirect mbuf is attached, refcnt of the direct mbuf would be
> + *   2 as long as the direct mbuf itself isn't freed after the attachment.
> + *   In such cases, the buffer area of a direct mbuf must be read-only. But
> + *   external buffer has its own refcnt and it starts from 1. Unless
> + *   multiple mbufs are attached to a mbuf having an external buffer, the
> + *   external buffer is writable.
> + * - There's no need to allocate buffer from a mempool. Any buffer can be
> + *   attached with appropriate free callback and its IO address.
> + * - Smaller metadata is required to maintain shared data such as refcnt.
> + *
> + * @warning
> + * @b EXPERIMENTAL: This API may change without prior notice.
> + * Once external buffer is enabled by allowing experimental API,
> + * ``RTE_MBUF_DIRECT()`` and ``RTE_MBUF_INDIRECT()`` are no longer
> + * exclusive. A mbuf can be considered direct if it is neither indirect nor
> + * having external buffer.
> + *
> + * @param m
> + *   The pointer to the mbuf.
> + * @param buf_addr
> + *   The pointer to the external buffer we're attaching to.
> + * @param buf_iova
> + *   IO address of the external buffer we're attaching to.
> + * @param buf_len
> + *   The size of the external buffer we're attaching to. If memory for
> + *   shared data is not provided, buf_len must be larger than the size of
> + *   ``struct rte_mbuf_ext_shared_info`` and padding for alignment. If not
> + *   enough, this function will return NULL.
> + * @param shinfo
> + *   User-provided memory for shared data. If NULL, a few bytes in the
> + *   trailer of the provided buffer will be dedicated for shared data and
> + *   the shared data will be properly initialized. Otherwise, user must
> + *   initialize the content except for free callback and its argument. The
> + *   pointer of shared data will be stored in m->shinfo.
> + * @param free_cb
> + *   Free callback function to call when the external buffer needs to be
> + *   freed.
> + * @param fcb_opaque
> + *   Argument for the free callback function.
> + *
> + * @return
> + *   A pointer to the new start of the data on success, return NULL
> + *   otherwise.
> + */
> +static inline char * __rte_experimental
> +rte_pktmbuf_attach_extbuf(struct rte_mbuf *m, void *buf_addr,
> +	rte_iova_t buf_iova, uint16_t buf_len,
> +	struct rte_mbuf_ext_shared_info *shinfo,
> +	rte_mbuf_extbuf_free_callback_t free_cb, void *fcb_opaque)
> +{
> +	/* Additional attachment should be done by rte_pktmbuf_attach() */
> +	RTE_ASSERT(!RTE_MBUF_HAS_EXTBUF(m));

Shouldn't we have here something like:
RTE_ASSERT(RTE_MBUF_DIRECT(m) && rte_mbuf_refcnt_read(m) == 1);
?

> +
> +	m->buf_addr = buf_addr;
> +	m->buf_iova = buf_iova;
> +
> +	if (shinfo == NULL) {

Instead of allocating shinfo ourselves - wound's it be better to rely
on caller always allocating afeeling it for us (he can do that at the end/start of buffer,
or whenever he likes to.
Again in that case - caller can provide one shinfo to several mbufs (with different buf_addrs)
and would know for sure that free_cb wouldn't be overwritten by mistake.
I.E. mbuf code will only update refcnt inside shinfo.

> +		void *buf_end = RTE_PTR_ADD(buf_addr, buf_len);
> +
> +		shinfo = RTE_PTR_ALIGN_FLOOR(RTE_PTR_SUB(buf_end,
> +					sizeof(*shinfo)), sizeof(uintptr_t));
> +		if ((void *)shinfo <= buf_addr)
> +			return NULL;
> +
> +		m->buf_len = RTE_PTR_DIFF(shinfo, buf_addr);
> +		rte_mbuf_ext_refcnt_set(shinfo, 1);
> +	} else {
> +		m->buf_len = buf_len;

I think you need to update shinfo>refcnt here too.

> +	}
> +
> +	m->data_len = 0;
> +	m->data_off = 0;
> +
> +	m->ol_flags |= EXT_ATTACHED_MBUF;
> +	m->shinfo = shinfo;
> +
> +	shinfo->free_cb = free_cb;
> +	shinfo->fcb_opaque = fcb_opaque;
> +
> +	return (char *)m->buf_addr + m->data_off;
> +}
> +
> +/**
> + * Detach the external buffer attached to a mbuf, same as
> + * ``rte_pktmbuf_detach()``
> + *
> + * @param m
> + *   The mbuf having external buffer.
> + */
> +#define rte_pktmbuf_detach_extbuf(m) rte_pktmbuf_detach(m)
> +
> +/**
>   * Attach packet mbuf to another packet mbuf.
>   *
> - * After attachment we refer the mbuf we attached as 'indirect',
> - * while mbuf we attached to as 'direct'.
> - * The direct mbuf's reference counter is incremented.
> + * If the mbuf we are attaching to isn't a direct buffer and is attached to
> + * an external buffer, the mbuf being attached will be attached to the
> + * external buffer instead of mbuf indirection.
> + *
> + * Otherwise, the mbuf will be indirectly attached. After attachment we
> + * refer the mbuf we attached as 'indirect', while mbuf we attached to as
> + * 'direct'.  The direct mbuf's reference counter is incremented.
>   *
>   * Right now, not supported:
>   *  - attachment for already indirect mbuf (e.g. - mi has to be direct).
> @@ -1231,19 +1440,19 @@ static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
>   */
>  static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
>  {
> -	struct rte_mbuf *md;
> -
>  	RTE_ASSERT(RTE_MBUF_DIRECT(mi) &&
>  	    rte_mbuf_refcnt_read(mi) == 1);
> 
> -	/* if m is not direct, get the mbuf that embeds the data */
> -	if (RTE_MBUF_DIRECT(m))
> -		md = m;
> -	else
> -		md = rte_mbuf_from_indirect(m);
> +	if (RTE_MBUF_HAS_EXTBUF(m)) {
> +		rte_mbuf_ext_refcnt_update(m->shinfo, 1);
> +		mi->ol_flags = m->ol_flags;
> +	} else {
> +		/* if m is not direct, get the mbuf that embeds the data */
> +		rte_mbuf_refcnt_update(rte_mbuf_from_indirect(m), 1);
> +		mi->priv_size = m->priv_size;
> +		mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
> +	}
> 
> -	rte_mbuf_refcnt_update(md, 1);
> -	mi->priv_size = m->priv_size;
>  	mi->buf_iova = m->buf_iova;
>  	mi->buf_addr = m->buf_addr;
>  	mi->buf_len = m->buf_len;
> @@ -1259,7 +1468,6 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
>  	mi->next = NULL;
>  	mi->pkt_len = mi->data_len;
>  	mi->nb_segs = 1;
> -	mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
>  	mi->packet_type = m->packet_type;
>  	mi->timestamp = m->timestamp;
> 
> @@ -1268,12 +1476,52 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
>  }
> 
>  /**
> - * Detach an indirect packet mbuf.
> + * @internal used by rte_pktmbuf_detach().
>   *
> + * Decrement the reference counter of the external buffer. When the
> + * reference counter becomes 0, the buffer is freed by pre-registered
> + * callback.
> + */
> +static inline void
> +__rte_pktmbuf_free_extbuf(struct rte_mbuf *m)
> +{
> +	RTE_ASSERT(RTE_MBUF_HAS_EXTBUF(m));
> +	RTE_ASSERT(m->shinfo != NULL);
> +
> +	if (rte_mbuf_ext_refcnt_update(m->shinfo, -1) == 0)
> +		m->shinfo->free_cb(m->buf_addr, m->shinfo->fcb_opaque);
> +}
> +
> +/**
> + * @internal used by rte_pktmbuf_detach().
> + *
> + * Decrement the direct mbuf's reference counter. When the reference
> + * counter becomes 0, the direct mbuf is freed.
> + */
> +static inline void
> +__rte_pktmbuf_free_direct(struct rte_mbuf *m)
> +{
> +	struct rte_mbuf *md;
> +
> +	RTE_ASSERT(RTE_MBUF_INDIRECT(m));
> +
> +	md = rte_mbuf_from_indirect(m);
> +
> +	if (rte_mbuf_refcnt_update(md, -1) == 0) {
> +		md->next = NULL;
> +		md->nb_segs = 1;
> +		rte_mbuf_refcnt_set(md, 1);
> +		rte_mbuf_raw_free(md);
> +	}
> +}
> +
> +/**
> + * Detach a packet mbuf from external buffer or direct buffer.
> + *
> + *  - decrement refcnt and free the external/direct buffer if refcnt
> + *    becomes zero.
>   *  - restore original mbuf address and length values.
>   *  - reset pktmbuf data and data_len to their default values.
> - *  - decrement the direct mbuf's reference counter. When the
> - *  reference counter becomes 0, the direct mbuf is freed.
>   *
>   * All other fields of the given packet mbuf will be left intact.
>   *
> @@ -1282,10 +1530,14 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
>   */
>  static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
>  {
> -	struct rte_mbuf *md = rte_mbuf_from_indirect(m);
>  	struct rte_mempool *mp = m->pool;
>  	uint32_t mbuf_size, buf_len, priv_size;
> 
> +	if (RTE_MBUF_HAS_EXTBUF(m))
> +		__rte_pktmbuf_free_extbuf(m);
> +	else
> +		__rte_pktmbuf_free_direct(m);
> +
>  	priv_size = rte_pktmbuf_priv_size(mp);
>  	mbuf_size = sizeof(struct rte_mbuf) + priv_size;
>  	buf_len = rte_pktmbuf_data_room_size(mp);
> @@ -1297,13 +1549,6 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
>  	rte_pktmbuf_reset_headroom(m);
>  	m->data_len = 0;
>  	m->ol_flags = 0;
> -
> -	if (rte_mbuf_refcnt_update(md, -1) == 0) {
> -		md->next = NULL;
> -		md->nb_segs = 1;
> -		rte_mbuf_refcnt_set(md, 1);
> -		rte_mbuf_raw_free(md);
> -	}
>  }
> 
>  /**
> @@ -1327,7 +1572,7 @@ rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
> 
>  	if (likely(rte_mbuf_refcnt_read(m) == 1)) {
> 
> -		if (RTE_MBUF_INDIRECT(m))
> +		if (!RTE_MBUF_DIRECT(m))
>  			rte_pktmbuf_detach(m);
> 
>  		if (m->next != NULL) {
> @@ -1339,7 +1584,7 @@ rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
> 
>  	} else if (__rte_mbuf_refcnt_update(m, -1) == 0) {
> 
> -		if (RTE_MBUF_INDIRECT(m))
> +		if (!RTE_MBUF_DIRECT(m))
>  			rte_pktmbuf_detach(m);
> 
>  		if (m->next != NULL) {
> --
> 2.11.0



More information about the dev mailing list