[dpdk-dev] [PATCH] app/testpmd: update start log to be less verbose
Ferruh Yigit
ferruh.yigit at intel.com
Thu Apr 26 12:36:14 CEST 2018
On 4/26/2018 10:45 AM, Ferruh Yigit wrote:
> On 4/26/2018 1:16 AM, Zhang, Qi Z wrote:
>>
>>
>>> -----Original Message-----
>>> From: Yigit, Ferruh
>>> Sent: Wednesday, April 25, 2018 10:15 PM
>>> To: Lu, Wenzhuo <wenzhuo.lu at intel.com>; Wu, Jingjing
>>> <jingjing.wu at intel.com>
>>> Cc: dev at dpdk.org; Yigit, Ferruh <ferruh.yigit at intel.com>; Zhang, Qi Z
>>> <qi.z.zhang at intel.com>
>>> Subject: [PATCH] app/testpmd: update start log to be less verbose
>>>
>>> A per port per queue log is too verbose with multiple port/queue log is
>>> longer than full screen, make it less verbose:
>>> - Reduced log to only first queue of the port, as a sample
>>> - Merged a few lines
>>> - Indent queue logs for readability
>>>
>>> The log becomes as following after update:
>>>
>>> testpmd> start tx_first
>>> io packet forwarding - ports=2 - cores=1 - streams=8 - NUMA support enabled,
>>> MP over anonymous pages disabled Logical Core 1 (socket 0) forwards
>>> packets on 8 streams:
>>> RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
>>> RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
>>> RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
>>> RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
>>> RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
>>> RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
>>> RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
>>> RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
>>>
>>> io packet forwarding packets/burst=32
>>> nb forwarding cores=1 - nb forwarding ports=2
>>> port 0: RX queue number: 4 Tx queue number: 4
>>> Rx offloads=0x1000 Tx offloads=0x0
>>> RX queue: 0
>>> RX desc=0 - RX free threshold=32
>>> RX threshold registers: pthresh=8 hthresh=8 wthresh=0
>>> RX Offloads=0x1000
>>> TX queue: 0
>>> TX desc=0 - TX free threshold=32
>>> TX threshold registers: pthresh=32 hthresh=0 wthresh=0
>>> TX RS bit threshold=32
>>> TX offloads=0x0
>>> port 1: RX queue number: 4 Tx queue number: 4
>>> Rx offloads=0x1000 Tx offloads=0x0
>>> RX queue: 0
>>> RX desc=0 - RX free threshold=32
>>> RX threshold registers: pthresh=8 hthresh=8 wthresh=0
>>> RX Offloads=0x1000
>>> TX queue: 0
>>> TX desc=0 - TX free threshold=32
>>> TX threshold registers: pthresh=32 hthresh=0 wthresh=0
>>> TX RS bit threshold=32
>>> TX offloads=0x0
>>>
>>> Fixes: 266f28b91e34 ("app/testpmd: enable per queue configure")
>>> Cc: qi.z.zhang at intel.com
>>>
>>> Signed-off-by: Ferruh Yigit <ferruh.yigit at intel.com>
>>> ---
>>>
>>> Hi Qi,
>>>
>>> If you are agree with the patch I can squash into original patch.
>>
>> OK
>
> Thanks, I will squash this one.
Squashed into relevant commit in next-net, thanks.
While applying one more indentation for port level added, also one more line for
Tx queue merged, the output become:
testpmd> start
io packet forwarding - ports=2 - cores=1 - streams=8 - NUMA support enabled, MP
over anonymous pages disabled
Logical Core 1 (socket 0) forwards packets on 8 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x1000 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x1000
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x1000 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x1000
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
More information about the dev
mailing list