[dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support to rte_flow
Doherty, Declan
declan.doherty at intel.com
Thu Apr 26 16:48:26 CEST 2018
On 26/04/2018 3:43 PM, Ori Kam wrote:
> Hi,
>
> PSB
>
> Ori
>> -----Original Message-----
>> From: Ferruh Yigit [mailto:ferruh.yigit at intel.com]
>> Sent: Thursday, April 26, 2018 5:28 PM
>> To: Ori Kam <orika at mellanox.com>; Declan Doherty
>> <declan.doherty at intel.com>; dev at dpdk.org; Matan Azrad
>> <matan at mellanox.com>
>> Subject: Re: [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support
>> to rte_flow
>>
>> On 4/26/2018 3:06 PM, Ori Kam wrote:
>>> Hi Declan,
>>>
>>> You are changing API (port_flow_query) which is in use in both MLX5
>>> and MLX4 this results in breaking the build.
>>
>> Hi Ori,
>>
>> Do you mean "rte_flow_query"? port_flow_query() is a function in testpmd,
>> how mlx is using it?
>>
>
> My bad let me be clearer.
> MLX5 and MLX4 are implementing the rte_flow_ops query function.
> This patch changes the prototype for the query function which results in
> compilation error and should also result in some change in the MLX5 and MLX4 implementation.
>
>
Hey Ori, I don't see any references to the query in MLX4 code.
static const struct rte_flow_ops mlx4_flow_ops = {
.validate = mlx4_flow_validate,
.create = mlx4_flow_create,
.destroy = mlx4_flow_destroy,
.flush = mlx4_flow_flush,
.isolate = mlx4_flow_isolate,
};
I just looking at fixing the MLX5 code compilation, I missed that due to
the function being ifdefined out with
HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT the flag and I missed the reference.
>>>
>>> Best,
>>> Ori
>>>
>>>> -----Original Message-----
>>>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Declan Doherty
>>>> Sent: Thursday, April 26, 2018 3:08 PM
>>>> To: dev at dpdk.org
>>>> Cc: Ferruh Yigit <ferruh.yigit at intel.com>; Declan Doherty
>>>> <declan.doherty at intel.com>
>>>> Subject: [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support
>>>> to rte_flow
>>>>
>>>> Add rte_flow_action_count action data structure to enable shared
>>>> counters across multiple flows on a single port or across multiple
>>>> flows on multiple ports within the same switch domain. Also this
>>>> enables multiple count actions to be specified in a single flow action.
>>>>
>>>> This patch also modifies the existing rte_flow_query API to take the
>>>> rte_flow_action structure as an input parameter instead of the
>>>> rte_flow_action_type enumeration to allow querying a specific action
>>>> from a flow rule when multiple actions of the same type are specified.
>>>>
>>>> This patch also contains updates for the bonding and failsafe PMDs
>>>> and testpmd application which are affected by this API change.
>>>>
>>>> Signed-off-by: Declan Doherty <declan.doherty at intel.com>
>>>> ---
>>>> app/test-pmd/cmdline_flow.c | 6 ++--
>>>> app/test-pmd/config.c | 15 +++++----
>>>> app/test-pmd/testpmd.h | 2 +-
>>>> doc/guides/prog_guide/rte_flow.rst | 59 +++++++++++++++++++++--
>> ----
>>>> ------
>>>> drivers/net/bonding/rte_eth_bond_flow.c | 9 ++---
>>>> drivers/net/failsafe/failsafe_flow.c | 4 +--
>>>> lib/librte_ether/rte_flow.c | 2 +-
>>>> lib/librte_ether/rte_flow.h | 38 +++++++++++++++++++--
>>>> lib/librte_ether/rte_flow_driver.h | 2 +-
>>>> 9 files changed, 93 insertions(+), 44 deletions(-)
>>>>
>>>> diff --git a/app/test-pmd/cmdline_flow.c
>>>> b/app/test-pmd/cmdline_flow.c index 1ac04a0ab..5754e7858 100644
>>>> --- a/app/test-pmd/cmdline_flow.c
>>>> +++ b/app/test-pmd/cmdline_flow.c
>>>> @@ -420,7 +420,7 @@ struct buffer {
>>>> } destroy; /**< Destroy arguments. */
>>>> struct {
>>>> uint32_t rule;
>>>> - enum rte_flow_action_type action;
>>>> + struct rte_flow_action action;
>>>> } query; /**< Query arguments. */
>>>> struct {
>>>> uint32_t *group;
>>>> @@ -1101,7 +1101,7 @@ static const struct token token_list[] = {
>>>> .next = NEXT(NEXT_ENTRY(QUERY_ACTION),
>>>> NEXT_ENTRY(RULE_ID),
>>>> NEXT_ENTRY(PORT_ID)),
>>>> - .args = ARGS(ARGS_ENTRY(struct buffer, args.query.action),
>>>> + .args = ARGS(ARGS_ENTRY(struct buffer,
>>>> args.query.action.type),
>>>> ARGS_ENTRY(struct buffer, args.query.rule),
>>>> ARGS_ENTRY(struct buffer, port)),
>>>> .call = parse_query,
>>>> @@ -3842,7 +3842,7 @@ cmd_flow_parsed(const struct buffer *in)
>>>> break;
>>>> case QUERY:
>>>> port_flow_query(in->port, in->args.query.rule,
>>>> - in->args.query.action);
>>>> + &in->args.query.action);
>>>> break;
>>>> case LIST:
>>>> port_flow_list(in->port, in->args.list.group_n, diff --git
>>>> a/app/test-pmd/config.c b/app/test-pmd/config.c index
>>>> 0f2425229..cd6102dfc 100644
>>>> --- a/app/test-pmd/config.c
>>>> +++ b/app/test-pmd/config.c
>>>> @@ -1452,7 +1452,7 @@ port_flow_flush(portid_t port_id)
>>>> /** Query a flow rule. */
>>>> int
>>>> port_flow_query(portid_t port_id, uint32_t rule,
>>>> - enum rte_flow_action_type action)
>>>> + const struct rte_flow_action *action)
>>>> {
>>>> struct rte_flow_error error;
>>>> struct rte_port *port;
>>>> @@ -1474,15 +1474,16 @@ port_flow_query(portid_t port_id, uint32_t
>> rule,
>>>> return -ENOENT;
>>>> }
>>>> if ((unsigned int)action >= RTE_DIM(flow_action) ||
>>>> - !flow_action[action].name)
>>>> + !flow_action[action->type].name)
>>>> name = "unknown";
>>>> else
>>>> - name = flow_action[action].name;
>>>> - switch (action) {
>>>> + name = flow_action[action->type].name;
>>>> + switch (action->type) {
>>>> case RTE_FLOW_ACTION_TYPE_COUNT:
>>>> break;
>>>> default:
>>>> - printf("Cannot query action type %d (%s)\n", action, name);
>>>> + printf("Cannot query action type %d (%s)\n",
>>>> + action->type, name);
>>>> return -ENOTSUP;
>>>> }
>>>> /* Poisoning to make sure PMDs update it in case of error. */ @@
>>>> -1490,7 +1491,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
>>>> memset(&query, 0, sizeof(query));
>>>> if (rte_flow_query(port_id, pf->flow, action, &query, &error))
>>>> return port_flow_complain(&error);
>>>> - switch (action) {
>>>> + switch (action->type) {
>>>> case RTE_FLOW_ACTION_TYPE_COUNT:
>>>> printf("%s:\n"
>>>> " hits_set: %u\n"
>>>> @@ -1505,7 +1506,7 @@ port_flow_query(portid_t port_id, uint32_t
>> rule,
>>>> break;
>>>> default:
>>>> printf("Cannot display result for action type %d (%s)\n",
>>>> - action, name);
>>>> + action->type, name);
>>>> break;
>>>> }
>>>> return 0;
>>>> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
>>>> a33b525e2..1af87b8f4 100644
>>>> --- a/app/test-pmd/testpmd.h
>>>> +++ b/app/test-pmd/testpmd.h
>>>> @@ -620,7 +620,7 @@ int port_flow_create(portid_t port_id, int
>>>> port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t
>>>> *rule); int port_flow_flush(portid_t port_id); int
>>>> port_flow_query(portid_t port_id, uint32_t rule,
>>>> - enum rte_flow_action_type action);
>>>> + const struct rte_flow_action *action);
>>>> void port_flow_list(portid_t port_id, uint32_t n, const uint32_t
>>>> *group); int port_flow_isolate(portid_t port_id, int set);
>>>>
>>>> diff --git a/doc/guides/prog_guide/rte_flow.rst
>>>> b/doc/guides/prog_guide/rte_flow.rst
>>>> index 301f8762e..88bfc87eb 100644
>>>> --- a/doc/guides/prog_guide/rte_flow.rst
>>>> +++ b/doc/guides/prog_guide/rte_flow.rst
>>>> @@ -1277,17 +1277,19 @@ Actions are performed in list order:
>>>>
>>>> .. table:: Mark, count then redirect
>>>>
>>>> - +-------+--------+-----------+-------+
>>>> - | Index | Action | Field | Value |
>>>> - +=======+========+===========+=======+
>>>> - | 0 | MARK | ``mark`` | 0x2a |
>>>> - +-------+--------+-----------+-------+
>>>> - | 1 | COUNT |
>>>> - +-------+--------+-----------+-------+
>>>> - | 2 | QUEUE | ``queue`` | 10 |
>>>> - +-------+--------+-----------+-------+
>>>> - | 3 | END |
>>>> - +-------+----------------------------+
>>>> + +-------+--------+------------+-------+
>>>> + | Index | Action | Field | Value |
>>>> + +=======+========+============+=======+
>>>> + | 0 | MARK | ``mark`` | 0x2a |
>>>> + +-------+--------+------------+-------+
>>>> + | 1 | COUNT | ``shared`` | 0 |
>>>> + | | +------------+-------+
>>>> + | | | ``id`` | 0 |
>>>> + +-------+--------+------------+-------+
>>>> + | 2 | QUEUE | ``queue`` | 10 |
>>>> + +-------+--------+------------+-------+
>>>> + | 3 | END |
>>>> + +-------+-----------------------------+
>>>>
>>>> |
>>>>
>>>> @@ -1516,23 +1518,36 @@ Drop packets.
>>>> Action: ``COUNT``
>>>> ^^^^^^^^^^^^^^^^^
>>>>
>>>> -Enables counters for this rule.
>>>> +Adds a counter action to a matched flow.
>>>> +
>>>> +If more than one count action is specified in a single flow rule,
>>>> +then each action must specify a unique id.
>>>>
>>>> -These counters can be retrieved and reset through
>>>> ``rte_flow_query()``, see
>>>> +Counters can be retrieved and reset through ``rte_flow_query()``,
>>>> +see
>>>> ``struct rte_flow_query_count``.
>>>>
>>>> -- Counters can be retrieved with ``rte_flow_query()``.
>>>> -- No configurable properties.
>>>> +The shared flag indicates whether the counter is unique to the flow
>>>> +rule the action is specified with, or whether it is a shared counter.
>>>> +
>>>> +For a count action with the shared flag set, then then a global
>>>> +device namespace is assumed for the counter id, so that any matched
>>>> +flow rules
>>>> using
>>>> +a count action with the same counter id on the same port will
>>>> +contribute to that counter.
>>>> +
>>>> +For ports within the same switch domain then the counter id
>>>> +namespace
>>>> extends
>>>> +to all ports within that switch domain.
>>>>
>>>> .. _table_rte_flow_action_count:
>>>>
>>>> .. table:: COUNT
>>>>
>>>> - +---------------+
>>>> - | Field |
>>>> - +===============+
>>>> - | no properties |
>>>> - +---------------+
>>>> + +------------+---------------------+
>>>> + | Field | Value |
>>>> + +============+=====================+
>>>> + | ``shared`` | shared counter flag |
>>>> + +------------+---------------------+
>>>> + | ``id`` | counter id |
>>>> + +------------+---------------------+
>>>>
>>>> Query structure to retrieve and reset flow rule counters:
>>>>
>>>> @@ -2282,7 +2297,7 @@ definition.
>>>> int
>>>> rte_flow_query(uint16_t port_id,
>>>> struct rte_flow *flow,
>>>> - enum rte_flow_action_type action,
>>>> + const struct rte_flow_action *action,
>>>> void *data,
>>>> struct rte_flow_error *error);
>>>>
>>>> @@ -2290,7 +2305,7 @@ Arguments:
>>>>
>>>> - ``port_id``: port identifier of Ethernet device.
>>>> - ``flow``: flow rule handle to query.
>>>> -- ``action``: action type to query.
>>>> +- ``action``: action to query, this must match prototype from flow rule.
>>>> - ``data``: pointer to storage for the associated query data type.
>>>> - ``error``: perform verbose error reporting if not NULL. PMDs initialize
>>>> this structure in case of error only.
>>>> diff --git a/drivers/net/bonding/rte_eth_bond_flow.c
>>>> b/drivers/net/bonding/rte_eth_bond_flow.c
>>>> index 8093c04f5..31e4bcaeb 100644
>>>> --- a/drivers/net/bonding/rte_eth_bond_flow.c
>>>> +++ b/drivers/net/bonding/rte_eth_bond_flow.c
>>>> @@ -152,6 +152,7 @@ bond_flow_flush(struct rte_eth_dev *dev, struct
>>>> rte_flow_error *err)
>>>>
>>>> static int
>>>> bond_flow_query_count(struct rte_eth_dev *dev, struct rte_flow
>>>> *flow,
>>>> + const struct rte_flow_action *action,
>>>> struct rte_flow_query_count *count,
>>>> struct rte_flow_error *err)
>>>> {
>>>> @@ -165,7 +166,7 @@ bond_flow_query_count(struct rte_eth_dev
>> *dev,
>>>> struct rte_flow *flow,
>>>> rte_memcpy(&slave_count, count, sizeof(slave_count));
>>>> for (i = 0; i < internals->slave_count; i++) {
>>>> ret = rte_flow_query(internals->slaves[i].port_id,
>>>> - flow->flows[i],
>>>> RTE_FLOW_ACTION_TYPE_COUNT,
>>>> + flow->flows[i], action,
>>>> &slave_count, err);
>>>> if (unlikely(ret != 0)) {
>>>> RTE_BOND_LOG(ERR, "Failed to query flow on"
>>>> @@ -182,12 +183,12 @@ bond_flow_query_count(struct rte_eth_dev
>> *dev,
>>>> struct rte_flow *flow,
>>>>
>>>> static int
>>>> bond_flow_query(struct rte_eth_dev *dev, struct rte_flow *flow,
>>>> - enum rte_flow_action_type type, void *arg,
>>>> + const struct rte_flow_action *action, void *arg,
>>>> struct rte_flow_error *err)
>>>> {
>>>> - switch (type) {
>>>> + switch (action->type) {
>>>> case RTE_FLOW_ACTION_TYPE_COUNT:
>>>> - return bond_flow_query_count(dev, flow, arg, err);
>>>> + return bond_flow_query_count(dev, flow, action, arg, err);
>>>> default:
>>>> return rte_flow_error_set(err, ENOTSUP,
>>>> RTE_FLOW_ERROR_TYPE_ACTION,
>>>> arg,
>>>> diff --git a/drivers/net/failsafe/failsafe_flow.c
>>>> b/drivers/net/failsafe/failsafe_flow.c
>>>> index a97f4075d..bfe42fcee 100644
>>>> --- a/drivers/net/failsafe/failsafe_flow.c
>>>> +++ b/drivers/net/failsafe/failsafe_flow.c
>>>> @@ -174,7 +174,7 @@ fs_flow_flush(struct rte_eth_dev *dev, static
>>>> int fs_flow_query(struct rte_eth_dev *dev,
>>>> struct rte_flow *flow,
>>>> - enum rte_flow_action_type type,
>>>> + const struct rte_flow_action *action,
>>>> void *arg,
>>>> struct rte_flow_error *error) { @@ -185,7 +185,7 @@
>>>> fs_flow_query(struct rte_eth_dev *dev,
>>>> if (sdev != NULL) {
>>>> int ret = rte_flow_query(PORT_ID(sdev),
>>>> flow->flows[SUB_ID(sdev)],
>>>> - type, arg, error);
>>>> + action, arg, error);
>>>>
>>>> if ((ret = fs_err(sdev, ret))) {
>>>> fs_unlock(dev, 0);
>>>> diff --git a/lib/librte_ether/rte_flow.c
>>>> b/lib/librte_ether/rte_flow.c index 4f94ac9b5..7947529da 100644
>>>> --- a/lib/librte_ether/rte_flow.c
>>>> +++ b/lib/librte_ether/rte_flow.c
>>>> @@ -233,7 +233,7 @@ rte_flow_flush(uint16_t port_id, int
>>>> rte_flow_query(uint16_t port_id,
>>>> struct rte_flow *flow,
>>>> - enum rte_flow_action_type action,
>>>> + const struct rte_flow_action *action,
>>>> void *data,
>>>> struct rte_flow_error *error) { diff --git
>>>> a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h index
>>>> d390bbf5a..f8ba71cdb 100644
>>>> --- a/lib/librte_ether/rte_flow.h
>>>> +++ b/lib/librte_ether/rte_flow.h
>>>> @@ -1314,7 +1314,7 @@ enum rte_flow_action_type {
>>>> * These counters can be retrieved and reset through
>>>> rte_flow_query(),
>>>> * see struct rte_flow_query_count.
>>>> *
>>>> - * No associated configuration structure.
>>>> + * See struct rte_flow_action_count.
>>>> */
>>>> RTE_FLOW_ACTION_TYPE_COUNT,
>>>>
>>>> @@ -1546,6 +1546,38 @@ struct rte_flow_action_queue {
>>>> uint16_t index; /**< Queue index to use. */ };
>>>>
>>>> +
>>>> +/**
>>>> + * @warning
>>>> + * @b EXPERIMENTAL: this structure may change without prior notice
>>>> + *
>>>> + * RTE_FLOW_ACTION_TYPE_COUNT
>>>> + *
>>>> + * Adds a counter action to a matched flow.
>>>> + *
>>>> + * If more than one count action is specified in a single flow rule,
>>>> +then each
>>>> + * action must specify a unique id.
>>>> + *
>>>> + * Counters can be retrieved and reset through ``rte_flow_query()``,
>>>> +see
>>>> + * ``struct rte_flow_query_count``.
>>>> + *
>>>> + * The shared flag indicates whether the counter is unique to the
>>>> +flow rule
>>>> the
>>>> + * action is specified with, or whether it is a shared counter.
>>>> + *
>>>> + * For a count action with the shared flag set, then then a global
>>>> + device
>>>> + * namespace is assumed for the counter id, so that any matched flow
>>>> + rules
>>>> using
>>>> + * a count action with the same counter id on the same port will
>>>> + contribute
>>>> to
>>>> + * that counter.
>>>> + *
>>>> + * For ports within the same switch domain then the counter id
>>>> + namespace
>>>> extends
>>>> + * to all ports within that switch domain.
>>>> + */
>>>> +struct rte_flow_action_count {
>>>> + uint32_t shared:1; /**< Share counter ID with other flow rules. */
>>>> + uint32_t reserved:31; /**< Reserved, must be zero. */
>>>> + uint32_t id; /**< Counter ID. */
>>>> +};
>>>> +
>>>> /**
>>>> * RTE_FLOW_ACTION_TYPE_COUNT (query)
>>>> *
>>>> @@ -2044,7 +2076,7 @@ rte_flow_flush(uint16_t port_id,
>>>> * @param flow
>>>> * Flow rule handle to query.
>>>> * @param action
>>>> - * Action type to query.
>>>> + * Action definition as defined in original flow rule.
>>>> * @param[in, out] data
>>>> * Pointer to storage for the associated query data type.
>>>> * @param[out] error
>>>> @@ -2057,7 +2089,7 @@ rte_flow_flush(uint16_t port_id, int
>>>> rte_flow_query(uint16_t port_id,
>>>> struct rte_flow *flow,
>>>> - enum rte_flow_action_type action,
>>>> + const struct rte_flow_action *action,
>>>> void *data,
>>>> struct rte_flow_error *error);
>>>>
>>>> diff --git a/lib/librte_ether/rte_flow_driver.h
>>>> b/lib/librte_ether/rte_flow_driver.h
>>>> index 3800310ba..1c90c600d 100644
>>>> --- a/lib/librte_ether/rte_flow_driver.h
>>>> +++ b/lib/librte_ether/rte_flow_driver.h
>>>> @@ -88,7 +88,7 @@ struct rte_flow_ops {
>>>> int (*query)
>>>> (struct rte_eth_dev *,
>>>> struct rte_flow *,
>>>> - enum rte_flow_action_type,
>>>> + const struct rte_flow_action *,
>>>> void *,
>>>> struct rte_flow_error *);
>>>> /** See rte_flow_isolate(). */
>>>> --
>>>> 2.14.3
>>>
>
More information about the dev
mailing list