[dpdk-dev] [PATCH v5] ethdev: check Rx/Tx offloads

[Ferruh Yigit]

On 4/26/2018 3:37 PM, Wei Dai wrote:
> This patch check if a requested offloading is supported
> in the device capability.
> Any offloading is disabled by default if it is not set
> in rte_eth_dev_configure( ) and rte_eth_[rt]x_queue_setup().
> A per port offloading can only be enabled in
> rte_eth_dev_configure(). If a per port offloading is
> sent to rte_eth_[rt]x_queue_setup( ), return error.
> Only per queue offloading can be sent to
> rte_eth_[rt]x_queue_setup( ). A per queue offloading is
> enabled only if it is enabled in rte_eth_dev_configure( ) OR
> if it is enabled in rte_eth_[rt]x_queue_setup( ).
> If a per queue offloading is enabled in rte_eth_dev_configure(),
> it can't be disabled in rte_eth_[rt]x_queue_setup( ).
> If a per queue offloading is disabled in rte_eth_dev_configure( ),
> it can be enabled or disabled( ) in rte_eth_[rt]x_queue_setup( ).
> 
> This patch can make such checking in a common way in rte_ethdev
> layer to avoid same checking in underlying PMD.
> 
> Signed-off-by: Wei Dai <wei.dai at intel.com>
> ---
>  lib/librte_ether/rte_ethdev.c | 56 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index f0f53d4..5485f47 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -1196,6 +1196,28 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>  							ETHER_MAX_LEN;
>  	}
>  
> +	/* Any requested offload must be within its device capability */
> +	if ((local_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
> +	     local_conf.rxmode.offloads) {
> +		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Rx offloads "
> +				    "0x%" PRIx64 " doesn't match Rx offloads "
> +				    "capability 0x%" PRIx64 "\n",
> +				    port_id,
> +				    local_conf.rxmode.offloads,
> +				    dev_info.rx_offload_capa);
> +		return -EINVAL;
> +	}
> +	if ((local_conf.txmode.offloads & dev_info.tx_offload_capa) !=
> +	     local_conf.txmode.offloads) {
> +		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Tx offloads "
> +				    "0x%" PRIx64 " doesn't match Tx offloads "
> +				    "capability 0x%" PRIx64 "\n",
> +				    port_id,
> +				    local_conf.txmode.offloads,
> +				    dev_info.tx_offload_capa);
> +		return -EINVAL;
> +	}
> +
>  	/*
>  	 * Setup new number of RX/TX queues and reconfigure device.
>  	 */
> @@ -1547,6 +1569,23 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
>  						    &local_conf.offloads);
>  	}
>  
> +	/*
> +	 * Only per-queue offload can be enabled from application.
> +	 * If any pure per-port offload is sent to this function, return -EINVAL

This comment doesn't match below check, below doesn't check pure per-port offload

> +	 */
> +	if ((local_conf.offloads & dev_info.rx_queue_offload_capa) !=
> +	     local_conf.offloads) {> +		RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d rx_queue_id=%d "
> +				    "Requested offload 0x%" PRIx64 "doesn't "
> +				    "match per-queue capability 0x%" PRIx64
> +				    " in rte_eth_rx_queue_setup( )\n",
> +				    port_id,
> +				    rx_queue_id,
> +				    local_conf.offloads,
> +				    dev_info.rx_queue_offload_capa);
> +		return -EINVAL;
> +	}

Lets add one more check and consider this for rc1, later we can update checks
for suggested API in rc2.

Check to add (this is for existing API)
If a pure per-port update enabled configure, it should be enabled in
queue_setup() as well.


> +
>  	ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
>  					      socket_id, &local_conf, mp);
>  	if (!ret) {
> @@ -1681,6 +1720,23 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
>  					  &local_conf.offloads);
>  	}
>  
> +	/*
> +	 * Only per-queue offload can be enabled from applcation.
> +	 * If any pure per-port offload is sent to this function, return -EINVAL
> +	 */
> +	if ((local_conf.offloads & dev_info.tx_queue_offload_capa) !=
> +	     local_conf.offloads) {
> +		RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d tx_queue_id=%d "
> +				    "Requested offload 0x%" PRIx64 "doesn't "
> +				    "match per-queue capability 0x%" PRIx64
> +				    " in rte_eth_tx_queue_setup( )\n",
> +				    port_id,
> +				    tx_queue_id,
> +				    local_conf.offloads,
> +				    dev_info.tx_queue_offload_capa);
> +		return -EINVAL;
> +	}
> +
>  	return eth_err(port_id, (*dev->dev_ops->tx_queue_setup)(dev,
>  		       tx_queue_id, nb_tx_desc, socket_id, &local_conf));
>  }
>