[dpdk-dev] [RFC 2/3] vhost: add SET_VIRTIO_STATUS support

[Jens Freimann]

On Thu, Feb 22, 2018 at 07:19:09PM +0100, Maxime Coquelin wrote:
>This patch implements support for the new SET_VIRTIO_STATUS
>vhost-user request.
>
>The main use for this new request is for the backend to know
>when the driver sets the DRIVER_OK status bit. Starting Virtio
>1.0, we know that once the the bit is set, no more queues will
>be initialized.
>When it happens, this patch removes all queues starting from
>the first uninitialized one, so that the port starts even if
>the guest driver does not use all the queues provided by QEMU.
>This is for example the case with Windows driver, which only
>initializes as much queue pairs as vCPUs.
>
>The second use for this request is when the status changes to
>reset or failed state, the vhost port is stopped and virtqueues
>cleaned and freed.
>
>Signed-off-by: Maxime Coquelin <maxime.coquelin at redhat.com>
>---
> lib/librte_vhost/vhost_user.c | 98 +++++++++++++++++++++++++++++++++++++++++++
> lib/librte_vhost/vhost_user.h |  5 ++-
> 2 files changed, 102 insertions(+), 1 deletion(-)
>
>diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
>index c256ebb06..7ab02c44b 100644
>--- a/lib/librte_vhost/vhost_user.c
>+++ b/lib/librte_vhost/vhost_user.c
>@@ -67,6 +67,7 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
> 	[VHOST_USER_NET_SET_MTU]  = "VHOST_USER_NET_SET_MTU",
> 	[VHOST_USER_SET_SLAVE_REQ_FD]  = "VHOST_USER_SET_SLAVE_REQ_FD",
> 	[VHOST_USER_IOTLB_MSG]  = "VHOST_USER_IOTLB_MSG",
>+	[VHOST_USER_SET_VIRTIO_STATUS]  = "VHOST_USER_SET_VIRTIO_STATUS",
> };
>
> static uint64_t
>@@ -1244,6 +1245,100 @@ vhost_user_iotlb_msg(struct virtio_net **pdev, struct VhostUserMsg *msg)
> 	return 0;
> }
>
>+static int
>+vhost_user_set_virtio_status(struct virtio_net *dev, struct VhostUserMsg *msg)
>+{
>+	uint8_t old_status, new_status;
>+	uint32_t i;
>+
>+	/* As per Virtio spec, the Virtio device status is 8 bits wide */
>+	if (msg->payload.u64 != (uint8_t)msg->payload.u64) {
>+		RTE_LOG(ERR, VHOST_CONFIG,
>+				"Invalid Virtio dev status value (%lx)\n",
>+				msg->payload.u64);
>+		return -1;
>+	}
>+
>+	new_status = msg->payload.u64;
>+	old_status = dev->virtio_status;
>+
>+	if (new_status == old_status)
>+		return 0;
>+
>+	RTE_LOG(DEBUG, VHOST_CONFIG,
>+			"New Virtio device status %x (was %x)\n",
>+			new_status, old_status);
>+
>+	dev->virtio_status = new_status;
>+
>+	if (new_status == 0 || new_status & VIRTIO_CONFIG_S_FAILED) {
>+		/*
>+		 * The device moved to reset  or failed state,
>+		 * stop processing the virtqueues
>+		 */
>+		if (dev->flags & VIRTIO_DEV_RUNNING) {
>+			dev->flags &= ~VIRTIO_DEV_RUNNING;
>+			dev->notify_ops->destroy_device(dev->vid);
>+		}
>+
>+		while (dev->nr_vring > 0) {
>+			struct vhost_virtqueue *vq;
>+
>+			vq = dev->virtqueue[--dev->nr_vring];
>+			if (!vq)
>+				continue;
>+
>+			dev->virtqueue[dev->nr_vring] = NULL;
>+			cleanup_vq(dev, vq, 1);
>+			free_vq(vq);
>+		}
>+
>+		return 0;
>+	}
>+
>+	if ((dev->features & (1ULL << VIRTIO_F_VERSION_1)) &&
>+			(new_status & VIRTIO_CONFIG_S_DRIVER_OK) &&
>+			!virtio_is_ready(dev)) {
>+		/*
>+		 * Since Virtio 1.0, we know that no more queues will be
>+		 * setup after guest sets DRIVER_OK. So let's remove
>+		 * uinitialized queues.
>+		 */
>+		RTE_LOG(INFO, VHOST_CONFIG,
>+				"Driver is ready, but some queues aren't initialized\n");
>+
>+		/*
>+		 * Find the first uninitialized queue.
>+		 *
>+		 * Note: Ideally the backend implementation should
>+		 * support sparsed virtqueues, but as long as it is
>+		 * not the case, let's remove all queues after the
>+		 * first uninitialized one.
>+		 */
>+		for (i = 0; i < dev->nr_vring; i++) {
>+			if (!vq_is_ready(dev->virtqueue[i]))
>+				break;
>+		}
>+
>+		while (dev->nr_vring >= i) {
>+			struct vhost_virtqueue *vq;
>+
>+			vq = dev->virtqueue[--dev->nr_vring];

If i is 0, we could access an array element out of bounds, no?

With this fixed,

Reviewed-by: Jens Freimann <jfreimann at redhat.com> 

regards,
Jens