[dpdk-dev] [PATCH 6/8] net/ixgbe/base: update function comments

Qiming Yang qiming.yang at intel.com
Wed Jan 10 17:04:37 CET 2018


This patch mainly adds/removes comments for function
parameters that were missing or no longer needed.

Signed-off-by: Qiming Yang <qiming.yang at intel.com>
---
 drivers/net/ixgbe/base/ixgbe_82598.c     |  3 ++-
 drivers/net/ixgbe/base/ixgbe_82599.c     | 14 +++++++++++---
 drivers/net/ixgbe/base/ixgbe_api.c       | 16 +++++++++++++++-
 drivers/net/ixgbe/base/ixgbe_common.c    | 13 ++++++++++---
 drivers/net/ixgbe/base/ixgbe_dcb.c       | 10 ++++++++--
 drivers/net/ixgbe/base/ixgbe_dcb_82598.c | 22 +++++++++++++++++-----
 drivers/net/ixgbe/base/ixgbe_dcb_82599.c | 25 +++++++++++++++++++++----
 drivers/net/ixgbe/base/ixgbe_hv_vf.c     | 17 +++++++++++++++++
 drivers/net/ixgbe/base/ixgbe_mbx.c       |  4 ++--
 drivers/net/ixgbe/base/ixgbe_phy.c       | 19 ++++++++++++++++---
 drivers/net/ixgbe/base/ixgbe_vf.c        |  7 ++++---
 drivers/net/ixgbe/base/ixgbe_x550.c      | 10 +++++++++-
 12 files changed, 132 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ixgbe/base/ixgbe_82598.c b/drivers/net/ixgbe/base/ixgbe_82598.c
index d64abb2..ee7ce2e 100644
--- a/drivers/net/ixgbe/base/ixgbe_82598.c
+++ b/drivers/net/ixgbe/base/ixgbe_82598.c
@@ -548,6 +548,7 @@ s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 /**
  *  ixgbe_start_mac_link_82598 - Configures MAC link settings
  *  @hw: pointer to hardware structure
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Configures link settings based on values in the ixgbe_hw struct.
  *  Restarts the link.  Performs autonegotiation if needed.
@@ -1205,7 +1206,7 @@ s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset at address 0xA2
- *  @eeprom_data: value read
+ *  @sff8472_data: value read
  *
  *  Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
  **/
diff --git a/drivers/net/ixgbe/base/ixgbe_82599.c b/drivers/net/ixgbe/base/ixgbe_82599.c
index d382a60..110b114 100644
--- a/drivers/net/ixgbe/base/ixgbe_82599.c
+++ b/drivers/net/ixgbe/base/ixgbe_82599.c
@@ -265,7 +265,7 @@ s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
 /**
  * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
  * @hw: pointer to hardware structure
- * @reg_val: value to write to AUTOC
+ * @autoc: value to write to AUTOC
  * @locked: bool to indicate whether the SW/FW lock was already taken by
  *           previous proc_autoc_read_82599.
  *
@@ -1367,6 +1367,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
 s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
 			bool cloud_mode)
 {
+	UNREFERENCED_1PARAMETER(cloud_mode);
 	DEBUGFUNC("ixgbe_init_fdir_perfect_82599");
 
 	/*
@@ -1455,7 +1456,8 @@ do { \
 
 /**
  *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
- *  @stream: input bitstream to compute the hash on
+ *  @input: input bitstream to compute the hash on
+ *  @common: compressed common input dword
  *
  *  This function is almost identical to the function above but contains
  *  several optimizations such as unwinding all of the loops, letting the
@@ -1594,7 +1596,7 @@ do { \
 
 /**
  *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
- *  @atr_input: input bitstream to compute the hash on
+ *  @input: input bitstream to compute the hash on
  *  @input_mask: mask for the input bitstream
  *
  *  This function serves two main purposes.  First it applies the input_mask
@@ -1695,6 +1697,7 @@ s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
 	u32 fdirm = IXGBE_FDIRM_DIPv6;
 	u32 fdirtcpm;
 	u32 fdirip6m;
+	UNREFERENCED_1PARAMETER(cloud_mode);
 	DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599");
 
 	/*
@@ -1871,6 +1874,7 @@ s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
 	u32 addr_low, addr_high;
 	u32 cloud_type = 0;
 	s32 err;
+	UNREFERENCED_1PARAMETER(cloud_mode);
 
 	DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599");
 	if (!cloud_mode) {
@@ -1995,6 +1999,7 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
  *  @input_mask: mask for the input bitstream
  *  @soft_id: software index for the filters
  *  @queue: queue index to direct traffic to
+ *  @cloud_mode: unused
  *
  *  Note that the caller to this function must lock before calling, since the
  *  hardware writes must be protected from one another.
@@ -2005,6 +2010,7 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
 					u16 soft_id, u8 queue, bool cloud_mode)
 {
 	s32 err = IXGBE_ERR_CONFIG;
+	UNREFERENCED_1PARAMETER(cloud_mode);
 
 	DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599");
 
@@ -2514,6 +2520,7 @@ s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
  *  ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -2571,6 +2578,7 @@ STATIC s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to read from
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
diff --git a/drivers/net/ixgbe/base/ixgbe_api.c b/drivers/net/ixgbe/base/ixgbe_api.c
index 4117fb0..4870a15 100644
--- a/drivers/net/ixgbe/base/ixgbe_api.c
+++ b/drivers/net/ixgbe/base/ixgbe_api.c
@@ -549,6 +549,7 @@ s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
  *  ixgbe_read_phy_reg - Read PHY register
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: type of device you want to communicate with
  *  @phy_data: Pointer to read data from PHY register
  *
  *  Reads a value from a specified PHY register
@@ -567,6 +568,7 @@ s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
  *  ixgbe_write_phy_reg - Write PHY register
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: type of device you want to communicate with
  *  @phy_data: Data to write to the PHY register
  *
  *  Writes a value to specified PHY register
@@ -610,6 +612,8 @@ s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw)
 /**
  *  ixgbe_check_phy_link - Determine link and speed status
  *  @hw: pointer to hardware structure
+ *  @speed: link speed
+ *  @link_up: true when link is up
  *
  *  Reads a PHY register to determine if link is up and the current speed for
  *  the PHY.
@@ -625,6 +629,7 @@ s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
  *  ixgbe_setup_phy_link_speed - Set auto advertise
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Sets the auto advertised capabilities
  **/
@@ -650,6 +655,9 @@ s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on)
 /**
  *  ixgbe_check_link - Get link and speed status
  *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true when link is up
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
  *
  *  Reads the links register to determine if link is up and the current speed
  **/
@@ -703,6 +711,7 @@ void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
  *  ixgbe_setup_link - Set link speed
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Configures link settings.  Restarts the link.
  *  Performs autonegotiation if needed.
@@ -719,6 +728,7 @@ s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
  *  ixgbe_setup_mac_link - Set link speed
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Configures link settings.  Restarts the link.
  *  Performs autonegotiation if needed.
@@ -734,6 +744,8 @@ s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 /**
  *  ixgbe_get_link_capabilities - Returns link capabilities
  *  @hw: pointer to hardware structure
+ *  @speed: link speed capabilities
+ *  @autoneg: true when autoneg or autotry is enabled
  *
  *  Determines the link capabilities of the current configuration.
  **/
@@ -786,6 +798,7 @@ s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
 /**
  *  ixgbe_blink_led_stop - Stop blinking LEDs
  *  @hw: pointer to hardware structure
+ *  @index: led number to stop
  *
  *  Stop blinking LED based on index.
  **/
@@ -1028,6 +1041,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
  *  @mc_addr_list: the list of new multicast addresses
  *  @mc_addr_count: number of addresses
  *  @func: iterator function to walk the multicast address list
+ *  @clear: flag, when set clears the table beforehand
  *
  *  The given list replaces any existing list. Clears the MC addrs from receive
  *  address registers and the multicast table. Uses unused receive address
@@ -1241,7 +1255,7 @@ s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
 /**
  * ixgbe_set_source_address_pruning - Enable/Disable source address pruning
  * @hw: pointer to hardware structure
- * @enbale: enable or disable source address pruning
+ * @enable: enable or disable source address pruning
  * @pool: Rx pool - Rx pool to toggle source address pruning
  **/
 void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index 9ca6ebf..e54ba6a 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -2093,6 +2093,7 @@ STATIC void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
 /**
  *  ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
  *  @hw: pointer to hardware structure
+ *  @count: number of bits to shift
  **/
 STATIC u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
 {
@@ -2151,7 +2152,7 @@ STATIC void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
 /**
  *  ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
  *  @hw: pointer to hardware structure
- *  @eecd: EECD's current value
+ *  @eec: EEC's current value
  **/
 STATIC void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
 {
@@ -2531,6 +2532,7 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
  *  ixgbe_add_uc_addr - Adds a secondary unicast address.
  *  @hw: pointer to hardware structure
  *  @addr: new address
+ *  @vmdq: VMDq "set" or "pool" index
  *
  *  Adds it to unused receive address register or goes into promiscuous mode.
  **/
@@ -2675,7 +2677,7 @@ STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
 /**
  *  ixgbe_set_mta - Set bit-vector in multicast table
  *  @hw: pointer to hardware structure
- *  @hash_value: Multicast address hash value
+ *  @mc_addr: Multicast address
  *
  *  Sets the bit-vector in the multicast table.
  **/
@@ -3378,6 +3380,7 @@ s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw)
 /**
  *  prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
  *  @hw: pointer to hardware structure
+ *  @locked: bool to indicate whether the SW/FW lock was taken
  *  @reg_val: Value we read from AUTOC
  *
  *  The default case requires no protection so just to the register read.
@@ -3905,6 +3908,9 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
  *  ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
  *  @hw: pointer to hardware structure
  *  @vlan: VLAN id to write to VLAN filter
+ *  @vlvf_bypass: true to find vlanid only, false returns first empty slot if
+ *		  vlanid not found
+ *
  *
  *  return the VLVF index where this VLAN id should be placed
  *
@@ -4666,6 +4672,8 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
  *  @min: driver version minor number
  *  @build: driver version build number
  *  @sub: driver version sub build number
+ *  @len: unused
+ *  @driver_ver: unused
  *
  *  Sends driver version number to firmware through the manageability
  *  block.  On success return IXGBE_SUCCESS
@@ -4853,7 +4861,6 @@ STATIC const u8 ixgbe_emc_therm_limit[4] = {
 /**
  *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
  *  @hw: pointer to hardware structure
- *  @data: pointer to the thermal sensor data structure
  *
  *  Returns the thermal sensor data structure
  **/
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb.c b/drivers/net/ixgbe/base/ixgbe_dcb.c
index 9a6a508..2877f22 100644
--- a/drivers/net/ixgbe/base/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/base/ixgbe_dcb.c
@@ -43,6 +43,10 @@ POSSIBILITY OF SUCH DAMAGE.
  * are the smallest unit programmable into the underlying
  * hardware. The IEEE 802.1Qaz specification do not use bandwidth
  * groups so this is much simplified from the CEE case.
+ * @bw: bandwidth index by traffic class
+ * @refill: refill credits index by traffic class
+ * @max: max credits by traffic class
+ * @max_frame_size: maximum frame size
  */
 s32 ixgbe_dcb_calculate_tc_credits(u8 *bw, u16 *refill, u16 *max,
 				   int max_frame_size)
@@ -77,8 +81,10 @@ s32 ixgbe_dcb_calculate_tc_credits(u8 *bw, u16 *refill, u16 *max,
 
 /**
  * ixgbe_dcb_calculate_tc_credits_cee - Calculates traffic class credits
- * @ixgbe_dcb_config: Struct containing DCB settings.
- * @direction: Configuring either Tx or Rx.
+ * @hw: pointer to hardware structure
+ * @dcb_config: Struct containing DCB settings
+ * @max_frame_size: Maximum frame size
+ * @direction: Configuring either Tx or Rx
  *
  * This function calculates the credits allocated to each traffic class.
  * It should be called only after the rules are checked by
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb_82598.c b/drivers/net/ixgbe/base/ixgbe_dcb_82598.c
index 7ff7beb..3ed8337 100644
--- a/drivers/net/ixgbe/base/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/base/ixgbe_dcb_82598.c
@@ -110,7 +110,9 @@ s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
  *
  * Configure Rx Data Arbiter and credits for each traffic class.
  */
@@ -165,7 +167,10 @@ s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw, u16 *refill,
 /**
  * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
  *
  * Configure Tx Descriptor Arbiter and credits for each traffic class.
  */
@@ -209,7 +214,10 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
  *
  * Configure Tx Data Arbiter and credits for each traffic class.
  */
@@ -254,7 +262,7 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_pfc_82598 - Config priority flow control
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @pfc_en: enabled pfc bitmask
  *
  * Configure Priority Flow Control for each traffic class.
  */
@@ -338,7 +346,11 @@ s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
 /**
  * ixgbe_dcb_hw_config_82598 - Config and enable DCB
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @link_speed: unused
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
  *
  * Configure dcb settings and enable dcb mode.
  */
diff --git a/drivers/net/ixgbe/base/ixgbe_dcb_82599.c b/drivers/net/ixgbe/base/ixgbe_dcb_82599.c
index a52f83a..8f9e159 100644
--- a/drivers/net/ixgbe/base/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/base/ixgbe_dcb_82599.c
@@ -109,7 +109,11 @@ s32 ixgbe_dcb_get_pfc_stats_82599(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
+ * @map: priority to tc assignments indexed by priority
  *
  * Configure Rx Packet Arbiter and credits for each traffic class.
  */
@@ -168,7 +172,10 @@ s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
 /**
  * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
  *
  * Configure Tx Descriptor Arbiter and credits for each traffic class.
  */
@@ -213,7 +220,11 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, u16 *refill,
 /**
  * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
+ * @map: priority to tc assignments indexed by priority
  *
  * Configure Tx Packet Arbiter and credits for each traffic class.
  */
@@ -361,6 +372,7 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *map)
 /**
  * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
  * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
  *
  * Configure queue statistics registers, all queues belonging to same traffic
  * class uses a single set of queue statistics counters.
@@ -571,7 +583,12 @@ s32 ixgbe_dcb_config_82599(struct ixgbe_hw *hw,
 /**
  * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
  * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
+ * @link_speed: unused
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @tsa: transmission selection algorithm indexed by traffic class
+ * @map: priority to tc assignments indexed by priority
  *
  * Configure dcb settings and enable dcb mode.
  */
diff --git a/drivers/net/ixgbe/base/ixgbe_hv_vf.c b/drivers/net/ixgbe/base/ixgbe_hv_vf.c
index 47143a2..40dad77 100644
--- a/drivers/net/ixgbe/base/ixgbe_hv_vf.c
+++ b/drivers/net/ixgbe/base/ixgbe_hv_vf.c
@@ -36,6 +36,11 @@ POSSIBILITY OF SUCH DAMAGE.
 
 /**
  * Hyper-V variant - just a stub.
+ * @hw: unused
+ * @mc_addr_list: unused
+ * @mc_addr_count: unused
+ * @next: unused
+ * @clear: unused
  */
 static s32 ixgbevf_hv_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
 				 u32 mc_addr_count, ixgbe_mc_addr_itr next,
@@ -48,6 +53,8 @@ static s32 ixgbevf_hv_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_li
 
 /**
  * Hyper-V variant - just a stub.
+ * @hw: unused
+ * @xcast_mode: unused
  */
 static s32 ixgbevf_hv_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode)
 {
@@ -58,6 +65,11 @@ static s32 ixgbevf_hv_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode)
 
 /**
  * Hyper-V variant - just a stub.
+ * @hw: unused
+ * @vlan: unused
+ * @vind: unused
+ * @vlan_on: unused
+ * @vlvf_bypass: unused
  */
 static s32 ixgbevf_hv_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 				  bool vlan_on, bool vlvf_bypass)
@@ -96,6 +108,11 @@ static s32 ixgbevf_hv_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 v
 
 /**
  * Hyper-V variant; there is no mailbox communication.
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: unused
+ *
  */
 static s32 ixgbevf_hv_check_mac_link_vf(struct ixgbe_hw *hw,
 					ixgbe_link_speed *speed,
diff --git a/drivers/net/ixgbe/base/ixgbe_mbx.c b/drivers/net/ixgbe/base/ixgbe_mbx.c
index 042e5cc..5357e0a 100644
--- a/drivers/net/ixgbe/base/ixgbe_mbx.c
+++ b/drivers/net/ixgbe/base/ixgbe_mbx.c
@@ -41,7 +41,7 @@ POSSIBILITY OF SUCH DAMAGE.
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
  *
- *  returns SUCCESS if it successfully read message from buffer
+ *  returns SUCCESS if it successfuly read message from buffer
  **/
 s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
@@ -472,7 +472,7 @@ STATIC s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
  *
- *  returns SUCCESS if it successfully read message from buffer
+ *  returns SUCCESS if it successfuly read message from buffer
  **/
 STATIC s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
 			     u16 mbx_id)
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 62c3080..2df068e 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -86,8 +86,8 @@ STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
 
 /**
  * ixgbe_ones_comp_byte_add - Perform one's complement addition
- * @add1 - addend 1
- * @add2 - addend 2
+ * @add1: addend 1
+ * @add2: addend 2
  *
  * Returns one's complement 8-bit sum.
  */
@@ -398,6 +398,7 @@ s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
 /**
  *  ixgbe_validate_phy_addr - Determines phy address is valid
  *  @hw: pointer to hardware structure
+ *  @phy_addr: PHY address
  *
  **/
 bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
@@ -575,6 +576,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
  *  the SWFW lock
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
@@ -656,6 +658,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
  *  using the SWFW lock - this function is needed in most cases
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
@@ -872,6 +875,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
  *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
+ *  @autoneg_wait_to_complete: unused
  **/
 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 				       ixgbe_link_speed speed,
@@ -977,6 +981,8 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
 /**
  *  ixgbe_check_phy_link_tnx - Determine link and speed status
  *  @hw: pointer to hardware structure
+ *  @speed: current link speed
+ *  @link_up: true is link is up, false otherwise
  *
  *  Reads the VS1 register to determine if link is up and the current speed for
  *  the PHY.
@@ -1941,7 +1947,7 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset at address 0xA2
- *  @eeprom_data: value read
+ *  @sff8472_data: value read
  *
  *  Performs byte read operation to SFP module's SFF-8472 data over I2C
  **/
@@ -1990,6 +1996,7 @@ STATIC bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
  *  ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *  @lock: true if to take and release semaphore
  *
@@ -2081,6 +2088,7 @@ STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -2097,6 +2105,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -2113,6 +2122,7 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *  @lock: true if to take and release semaphore
  *
@@ -2184,6 +2194,7 @@ STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
@@ -2200,6 +2211,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
@@ -2582,6 +2594,7 @@ STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
 {
 	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
 	bool data;
+	UNREFERENCED_1PARAMETER(hw);
 
 	DEBUGFUNC("ixgbe_get_i2c_data");
 
diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c
index b513190..5b25a6b 100644
--- a/drivers/net/ixgbe/base/ixgbe_vf.c
+++ b/drivers/net/ixgbe/base/ixgbe_vf.c
@@ -376,6 +376,7 @@ s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
  *  @mc_addr_list: array of multicast addresses to program
  *  @mc_addr_count: number of multicast addresses to program
  *  @next: caller supplied function to return next address in list
+ *  @clear: unused
  *
  *  Updates the Multicast Table Array.
  **/
@@ -509,8 +510,9 @@ u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_get_mac_addr_vf - Read device MAC address
- *  @hw: pointer to the HW structure
+ * ixgbe_get_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ * @mac_addr: the MAC address
  **/
 s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
 {
@@ -556,7 +558,6 @@ s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
  *  ixgbe_setup_mac_link_vf - Setup MAC link settings
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
- *  @autoneg: true if autonegotiation enabled
  *  @autoneg_wait_to_complete: true when waiting for completion is needed
  *
  *  Set the link speed in the AUTOC register and restarts link.
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index c55bc5c..801e652 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -758,7 +758,7 @@ static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
 
 /**
  * ixgbe_setup_eee_fw - Enable/disable EEE support
- * @hw: pointer to the HW structurewrite_reg_mdi
+ * @hw: pointer to the HW structure
  * @enable_eee: boolean flag to enable EEE
  *
  * Enable/disable EEE based on enable_eee flag.
@@ -2625,6 +2625,8 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
 /**
  *  ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
  *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: unused
  *
  *  Configure the external PHY and the integrated KR PHY for SFP support.
  **/
@@ -2717,6 +2719,8 @@ STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
 /**
  *  ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
  *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg_wait_to_complete: unused
  *
  *  Configure the the integrated PHY for SFP support.
  **/
@@ -3338,6 +3342,8 @@ s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
  * @ptr: pointer offset in eeprom
  * @size: size of section pointed by ptr, if 0 first word will be used as size
  * @csum: address of checksum to update
+ * @buffer: pointer to buffer containing calculated checksum
+ * @buffer_size: size of buffer
  *
  * Returns error status for any failure
  */
@@ -3715,6 +3721,7 @@ s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
 
 /**
  * ixgbe_disable_rx_x550 - Disable RX unit
+ * @hw: pointer to hardware structure
  *
  * Enables the Rx DMA unit for x550
  **/
@@ -4359,6 +4366,7 @@ STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
  *  ixgbe_read_phy_reg_x550a  - Reads specified PHY register
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  *
  *  Reads a value from a specified PHY register using the SWFW lock and PHY
-- 
2.9.4



More information about the dev mailing list