[dpdk-dev] [PATCH v3 0/7] crypto: add virtio poll mode driver
Jay Zhou
jianjay.zhou at huawei.com
Sun Mar 25 10:33:32 CEST 2018
This patch series introduce virtio crypto poll mode driver.
Since it is limited by the vhost crypto backend of the virtio-crypto,
this patch series only supports a limited subset of crypto services.
Only the following algorithms are tested:
Cipher algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC (128-bit, 192-bit and 256-bit keys)
Cipher then hash algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC with RTE_CRYPTO_AUTH_SHA1_HMAC
The qemu side has supported vhost crypto and the vhost user crypto server
side patches had been sent to DPDK community, pls see
[PATCH v2 00/10] lib/librte_vhost: introduce new vhost user crypto backend
support
https://dpdk.org/ml/archives/dev/2018-February/091594.html
Firstly run DPDK vhost crypto sample as a server side and build QEMU with
vhost crypto enabled.
QEMU can then be started using the following parameters:
qemu-system-x86_64 \
[...] \
-chardev socket,id=charcrypto0,path=/path/to/your/socket \
-object cryptodev-vhost-user,id=cryptodev0,chardev=charcrypto0 \
-device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0
[...]
Bind the uio_generic driver for the virtio-crypto device.
For example, 0000:00:04.0 is the domain, bus, device and function
number of the virtio-crypto device:
modprobe uio_pci_generic
echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
The front-end virtio crypto PMD driver can be installed:
cd to the top-level DPDK directory
sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO\)=n,\1=y,' config/common_base
make config T=x86_64-native-linuxapp-gcc
make install T=x86_64-native-linuxapp-gcc
The unit test cases can be compiled as below:
cd to the top-level DPDK directory
export RTE_TARGET=x86_64-native-linuxapp-gcc
export RTE_SDK=`pwd`
cd to test/test
make
./test (MUST reserve enough huge pages memory)
type the command "cryptodev_virtio_autotest" to test
The result should be like this:
RTE>>cryptodev_virtio_autotest
+ ------------------------------------------------------- +
+ Test Suite : Crypto VIRTIO Unit Test Suite
+ ------------------------------------------------------- +
0) TestCase AES-128-CBC Encryption PASS
1) TestCase AES-128-CBC Decryption PASS
2) TestCase AES-192-CBC Encryption PASS
3) TestCase AES-192-CBC Decryption PASS
4) TestCase AES-256-CBC Encryption PASS
5) TestCase AES-256-CBC Decryption PASS
6) TestCase AES-256-CBC OOP Encryption PASS
7) TestCase AES-256-CBC OOP Decryption PASS
8) TestCase AES-128-CTR Encryption PASS
9) TestCase AES-128-CTR Decryption PASS
10) TestCase AES-192-CTR Encryption PASS
11) TestCase AES-192-CTR Decryption PASS
12) TestCase AES-256-CTR Encryption PASS
13) TestCase AES-256-CTR Decryption PASS
+ TestCase [ 0] : test_AES_cipheronly_virtio_all succeeded
+ ------------------------------------------------------- +
+ Test Suite Summary
+ Tests Total : 1
+ Tests Skipped : 0
+ Tests Executed : 1
+ Tests Unsupported: 0
+ Tests Passed : 1
+ Tests Failed : 0
+ ------------------------------------------------------- +
Test OK
The performance can be tested as below:
reserve enough huge pages
cd to the top-level DPDK directory
export RTE_TARGET=x86_64-native-linuxapp-gcc
export RTE_SDK=`pwd`
cd to app/test-crypto-perf
type the command "make" to compile
run the tests with the following command:
./dpdk-test-crypto-perf -l 0,1 -- --devtype crypto_virtio \
--ptest throughput --optype cipher-then-auth --cipher-algo aes-cbc \
--cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac \
--auth-op generate --auth-key-sz 64 --digest-sz 12 \
--total-ops 100000000 --burst-sz 64 --buffer-sz 2048
Please help to review, thanks!
Changes in v3:
- set up capabilities for virtio crypto PMD [Fan]
- delete AES-CTR unit test cases since vhost_user crypto backend does not
support [Fan]
- fix a variable uninitialized in virtio_crypto_queue_setup() [Xin, Fan]
- fix a bug in virtqueue_dequeue_burst_rx()
Changes in v2:
- using pre-allocated mempool instead of rte_malloc to improve performance [Fan]
- split the patch into a patchset [Fan]
- using linux/virtio_crypto.h instead of creating a copy of the file [Fan]
- update doc/guides/cryptodevs for describing virtio crypto PMD [Fan]
- update copyright
- delete virtio legacy mode code since virtio-crypto conforms to virtio-1.0
- refine the function and variable names
- fix errors and warnings reported by checkpatch
Jay Zhou (7):
crypto/virtio: add virtio related fundamental functions
crpyto/virtio: add crypto related session structure
cryptodev/virtio: core code of crypto devices
crypto/virtio: add makefile
cryptodev: add document for virtio crypto PMD
cryptodev: add function tests for virtio crypto PMD
MAINTAINERS: add myself as virtio crypto PMD maintainer
MAINTAINERS | 6 +
config/common_base | 20 +
doc/guides/cryptodevs/features/virtio.ini | 22 +
doc/guides/cryptodevs/virtio.rst | 117 ++
drivers/crypto/Makefile | 1 +
drivers/crypto/virtio/Makefile | 31 +
.../virtio/rte_pmd_virtio_crypto_version.map | 3 +
drivers/crypto/virtio/virtio_crypto_algs.h | 27 +
drivers/crypto/virtio/virtio_crypto_capabilities.h | 51 +
drivers/crypto/virtio/virtio_cryptodev.c | 1553 ++++++++++++++++++++
drivers/crypto/virtio/virtio_cryptodev.h | 66 +
drivers/crypto/virtio/virtio_logs.h | 47 +
drivers/crypto/virtio/virtio_pci.c | 460 ++++++
drivers/crypto/virtio/virtio_pci.h | 253 ++++
drivers/crypto/virtio/virtio_ring.h | 137 ++
drivers/crypto/virtio/virtio_rxtx.c | 540 +++++++
drivers/crypto/virtio/virtqueue.c | 43 +
drivers/crypto/virtio/virtqueue.h | 176 +++
mk/rte.app.mk | 1 +
test/test/test_cryptodev.c | 49 +
test/test/test_cryptodev.h | 1 +
test/test/test_cryptodev_aes_test_vectors.h | 24 +-
test/test/test_cryptodev_blockcipher.c | 9 +-
test/test/test_cryptodev_blockcipher.h | 1 +
24 files changed, 3629 insertions(+), 9 deletions(-)
create mode 100644 doc/guides/cryptodevs/features/virtio.ini
create mode 100644 doc/guides/cryptodevs/virtio.rst
create mode 100644 drivers/crypto/virtio/Makefile
create mode 100644 drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map
create mode 100644 drivers/crypto/virtio/virtio_crypto_algs.h
create mode 100644 drivers/crypto/virtio/virtio_crypto_capabilities.h
create mode 100644 drivers/crypto/virtio/virtio_cryptodev.c
create mode 100644 drivers/crypto/virtio/virtio_cryptodev.h
create mode 100644 drivers/crypto/virtio/virtio_logs.h
create mode 100644 drivers/crypto/virtio/virtio_pci.c
create mode 100644 drivers/crypto/virtio/virtio_pci.h
create mode 100644 drivers/crypto/virtio/virtio_ring.h
create mode 100644 drivers/crypto/virtio/virtio_rxtx.c
create mode 100644 drivers/crypto/virtio/virtqueue.c
create mode 100644 drivers/crypto/virtio/virtqueue.h
--
1.8.3.1
More information about the dev
mailing list