[dpdk-dev] pthread_barrier_deadlock in -rc1

[Maxime Coquelin]

Hi Jiangfeng,

On 05/02/2018 10:19 AM, Tan, Jianfeng wrote:
> 
> 
> On 5/1/2018 2:46 AM, Olivier Matz wrote:
>> Hi Maxime,
>>
>> Le 30 avril 2018 17:45:52 GMT+02:00, Maxime Coquelin 
>> <maxime.coquelin at redhat.com> a écrit :
>>> Hi Olivier,
>>>
>>> On 04/24/2018 04:46 PM, Olivier Matz wrote:
>>>> Some parts of dpdk use their own management threads. Most of the
>>> time,
>>>> the affinity of the thread is not properly set: it should not be
>>> scheduled
>>>> on the dataplane cores, because interrupting them can cause packet
>>> losses.
>>>> This patchset introduces a new wrapper for thread creation that does
>>>> the job automatically, avoiding code duplication.
>>>>
>>>> v3:
>>>> * new patch: use this API in examples when relevant.
>>>> * replace pthread_kill by pthread_cancel. Note that pthread_join()
>>>>     is still needed.
>>>> * rebase: vfio and pdump do not have control pthreads anymore, and
>>> eal
>>>>     has 2 new pthreads
>>>> * remove all calls to snprintf/strlcpy that truncate the thread name:
>>>>     all strings lengths are already < 16.
>>>>
>>>> v2:
>>>> * set affinity to master core if no core is off, as suggested by
>>>>     Anatoly
>>>>
>>>> Olivier Matz (5):
>>>>     eal: use sizeof to avoid a double use of a define
>>>>     eal: new function to create control threads
>>>>     eal: set name when creating a control thread
>>>>     eal: set affinity for control threads
>>>>     examples: use new API to create control threads
>>>>
>>>>    drivers/net/kni/Makefile                     |  1 +
>>>>    drivers/net/kni/rte_eth_kni.c                |  3 +-
>>>>    examples/tep_termination/main.c              | 16 +++----
>>>>    examples/vhost/main.c                        | 19 +++-----
>>>>    lib/librte_eal/bsdapp/eal/eal.c              |  4 +-
>>>>    lib/librte_eal/bsdapp/eal/eal_thread.c       |  2 +-
>>>>    lib/librte_eal/common/eal_common_proc.c      | 15 ++----
>>>>    lib/librte_eal/common/eal_common_thread.c    | 72
>>> ++++++++++++++++++++++++++++
>>>>    lib/librte_eal/common/include/rte_lcore.h    | 26 ++++++++++
>>>>    lib/librte_eal/linuxapp/eal/eal.c            |  4 +-
>>>>    lib/librte_eal/linuxapp/eal/eal_interrupts.c | 17 ++-----
>>>>    lib/librte_eal/linuxapp/eal/eal_thread.c     |  2 +-
>>>>    lib/librte_eal/linuxapp/eal/eal_timer.c      | 12 +----
>>>>    lib/librte_eal/rte_eal_version.map           |  1 +
>>>>    lib/librte_vhost/socket.c                    | 25 ++--------
>>>>    15 files changed, 135 insertions(+), 84 deletions(-)
>>>>
>>> I face a deadlock issue with your series, that Jianfeng patch does not
>>> resolve ("eal: fix threads block on barrier"). Reverting the series and
>>> Jianfeng patch makes the issue to disappear.
>>>
>>> I face the problem in a VM (not seen on the host):
>>> # ./install/bin/testpmd -l 0,1,2 --socket-mem 1024 -n 4 --proc-type
>>> auto
>>> --file-prefix pg -- --portmask=3 --forward-mode=macswap
>>> --port-topology=chained --disable-rss -i --rxq=1 --txq=1 --rxd=256
>>> --txd=256 --nb-cores=2 --auto-start
>>> EAL: Detected 3 lcore(s)
>>> EAL: Detected 1 NUMA nodes
>>> EAL: Auto-detected process type: PRIMARY
>>> EAL: Multi-process socket /var/run/.pg_unix
>>>
>>>
>>> Then it is stuck. Attaching with GDB, I get below backtrace
>>> information:
>>>
>>> (gdb) info threads
>>>    Id   Target Id         Frame
>>>    3    Thread 0x7f63e1f9f700 (LWP 8808) "rte_mp_handle"
>>> 0x00007f63e2591bfd in recvmsg () at
>>> ../sysdeps/unix/syscall-template.S:81
>>>    2    Thread 0x7f63e179e700 (LWP 8809) "rte_mp_async"
>>> pthread_barrier_wait () at
>>> ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S:71
>>> * 1    Thread 0x7f63e32cec00 (LWP 8807) "testpmd" pthread_barrier_wait
>>> () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S:71
>>> (gdb) bt full
>>> #0  pthread_barrier_wait () at
>>> ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S:71
>>> No locals.
>>> #1  0x0000000000520c54 in rte_ctrl_thread_create
>>> (thread=thread at entry=0x7ffe5c895020, name=name at entry=0x869d86
>>> "rte_mp_async", attr=attr at entry=0x0,
>>> start_routine=start_routine at entry=0x521030 <async_reply_handle>,
>>> arg=arg at entry=0x0)
>>>      at /root/src/dpdk/lib/librte_eal/common/eal_common_thread.c:207
>>>          params = 0x17b1e40
>>>          lcore_id = <optimized out>
>>>          cpuset = {__bits = {1, 0 <repeats 15 times>}}
>>>          cpu_found = <optimized out>
>>>          ret = 0
>>> #2  0x00000000005220b6 in rte_mp_channel_init () at
>>> /root/src/dpdk/lib/librte_eal/common/eal_common_proc.c:674
>>>         path = "/var/run\000.pg_unix_*", '\000' <repeats 1301 times>...
>>>          dir_fd = 4
>>>          mp_handle_tid = 140066969745152
>>>          async_reply_handle_tid = 140066961352448
>>> #3  0x000000000050c227 in rte_eal_init (argc=argc at entry=23,
>>> argv=argv at entry=0x7ffe5c896378) at
>>> /root/src/dpdk/lib/librte_eal/linuxapp/eal/eal.c:775
>>>          i = <optimized out>
>>>          fctret = 11
>>>          ret = <optimized out>
>>>          thread_id = 140066989861888
>>>          run_once = {cnt = 1}
>>>          logid = 0x17b1e00 "testpmd"
>>>          cpuset = "T}\211\\\376\177", '\000' <repeats 117 times>,
>>> "\020", '\000' <repeats 116 times>...
>>>       thread_name = "X}\211\\\376\177\000\000\226\301\036\342c\177\000"
>>>          __func__ = "rte_eal_init"
>>> #4  0x0000000000473214 in main (argc=23, argv=0x7ffe5c896378) at
>>> /root/src/dpdk/app/test-pmd/testpmd.c:2597
>>>          diag = <optimized out>
>>>          port_id = <optimized out>
>>>          ret = <optimized out>
>>>          __func__ = "main"
>>> (gdb) thread 2
>>> [Switching to thread 2 (Thread 0x7f63e179e700 (LWP 8809))]
>>> #0  pthread_barrier_wait () at
>>> ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S:71
>>> 71        cmpl    %edx, (%rdi)
>>> (gdb) bt full
>>> #0  pthread_barrier_wait () at
>>> ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S:71
>>> No locals.
>>> #1  0x0000000000520777 in rte_thread_init (arg=<optimized out>) at
>>> /root/src/dpdk/lib/librte_eal/common/eal_common_thread.c:156
>>>          params = <optimized out>
>>>          start_routine = 0x521030 <async_reply_handle>
>>>          routine_arg = 0x0
>>> #2  0x00007f63e258add5 in start_thread (arg=0x7f63e179e700) at
>>> pthread_create.c:308
>>>          __res = <optimized out>
>>>          pd = 0x7f63e179e700
>>>          now = <optimized out>
>>>          unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140066961352448,
>>> 1212869169857371576, 0, 8392704, 0, 140066961352448,
>>> -1291626103561052744, -1291619793368703560}, mask_was_saved = 0}}, priv
>>>
>>> = {pad = {0x0, 0x0, 0x0, 0x0}, data = {
>>>                prev = 0x0, cleanup = 0x0, canceltype = 0}}}
>>>          not_first_call = <optimized out>
>>>          pagesize_m1 = <optimized out>
>>>          sp = <optimized out>
>>>          freesize = <optimized out>
>>> #3  0x00007f63e22b4b3d in clone () at
>>> ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
>>> No locals.
>>> (gdb) thread 3
>>> [Switching to thread 3 (Thread 0x7f63e1f9f700 (LWP 8808))]
>>> #0  0x00007f63e2591bfd in recvmsg () at
>>> ../sysdeps/unix/syscall-template.S:81
>>> 81    T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
>>> (gdb) bt full
>>> #0  0x00007f63e2591bfd in recvmsg () at
>>> ../sysdeps/unix/syscall-template.S:81
>>> No locals.
>>> #1  0x000000000052194e in read_msg (s=0x7f63e1f9d3b0, m=0x7f63e1f9d5a0)
>>>
>>> at /root/src/dpdk/lib/librte_eal/common/eal_common_proc.c:258
>>>          msglen = <optimized out>
>>>          control =
>>> "\000\000\000\000\000\000\000\000\336~\f\343c\177\000\000\005", '\000'
>>> <repeats 23 times>, "\360\371\033\342c\177\000"
>>>          cmsg = <optimized out>
>>>          iov = {iov_base = 0x7f63e1f9d5a0, iov_len = 332}
>>>        msgh = {msg_name = 0x7f63e1f9d3b0, msg_namelen = 110, msg_iov =
>>> 0x7f63e1f9d370, msg_iovlen = 1, msg_control = 0x7f63e1f9d380,
>>> msg_controllen = 48, msg_flags = 0}
>>> #2  mp_handle (arg=<optimized out>) at
>>> /root/src/dpdk/lib/librte_eal/common/eal_common_proc.c:346
>>>          msg = {type = 0, msg = {name = '\000' <repeats 63 times>,
>>> len_param = 0, num_fds = 0, param = '\000' <repeats 20 times>, "\002",
>>> '\000' <repeats 234 times>, fds = {0, 0, 0, 0, 0, 0, 0, 0}}}
>>>          sa = {sun_family = 55104,
>>>            sun_path =
>>> "\371\341c\177\000\000\352\372\f\343c\177\000\000\000\000\000\000\000\000\000\000\377\377\377\377\377\377\377\377\000\367\371\341c\177\000\000\030\000\000\000\000\000\000\000p\327\371\341c\177\000\000\000\367\371\341c\177\000\000\000\367\371\341c\177", 
>>>
>>>
>>> '\000' <repeats 34 times>, "\200\037\000\000\377\377"}
>>> #3  0x00007f63e258add5 in start_thread (arg=0x7f63e1f9f700) at
>>> pthread_create.c:308
>>>          __res = <optimized out>
>>>          pd = 0x7f63e1f9f700
>>>          now = <optimized out>
>>>          unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140066969745152,
>>> 1212869169857371576, 0, 8392704, 0, 140066969745152,
>>> -1291625004586295880, -1291619793368703560}, mask_was_saved = 0}}, priv
>>>
>>> = {pad = {0x0, 0x0, 0x0, 0x0}, data = {
>>>                prev = 0x0, cleanup = 0x0, canceltype = 0}}}
>>>          not_first_call = <optimized out>
>>>          pagesize_m1 = <optimized out>
>>>          sp = <optimized out>
>>>          freesize = <optimized out>
>>> #4  0x00007f63e22b4b3d in clone () at
>>> ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
>>> No locals.
>>>
>>> I don't have more info for now.
>>>
>>
>> Thanks for the feedback on this issue. I don't see obvious reason for 
>> this deadlock yet.
>>
>> I'll investigate it asap (not tomorrow, but wednesday). In the worst 
>> case, we can revert the series if I cannot find the root cause rapidly.
> 
> I might think that the suggestion from Stephen of destroying the barrier 
> can help this issue. I'll try to reproduce it and test it before sending 
> a patch to fix it.

In case you don't reproduce, feel free to send me the patch to test it.

Thanks,
Maxime

> Thanks,
> Jianfeng
> 
>>
>> Olivier
>>
>