[dpdk-dev] [v2,1/6] eventdev: introduce event crypto adapter
Gujjar, Abhinandan S
abhinandan.gujjar at intel.com
Thu May 3 08:03:01 CEST 2018
> -----Original Message-----
> From: Jerin Jacob <jerin.jacob at caviumnetworks.com>
> Sent: Sunday, April 29, 2018 9:39 PM
> To: Gujjar, Abhinandan S <abhinandan.gujjar at intel.com>
> Cc: hemant.agrawal at nxp.com; akhil.goyal at nxp.com; dev at dpdk.org; Vangati,
> Narender <narender.vangati at intel.com>; Rao, Nikhil <nikhil.rao at intel.com>;
> Eads, Gage <gage.eads at intel.com>
> Subject: Re: [v2,1/6] eventdev: introduce event crypto adapter
>
> -----Original Message-----
> > Date: Tue, 24 Apr 2018 18:13:22 +0530
> > From: Abhinandan Gujjar <abhinandan.gujjar at intel.com>
> > To: jerin.jacob at caviumnetworks.com, hemant.agrawal at nxp.com,
> > akhil.goyal at nxp.com, dev at dpdk.org
> > CC: narender.vangati at intel.com, abhinandan.gujjar at intel.com,
> > nikhil.rao at intel.com, gage.eads at intel.com
> > Subject: [v2,1/6] eventdev: introduce event crypto adapter
> > X-Mailer: git-send-email 1.9.1
> >
> > Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar at intel.com>
> > Signed-off-by: Nikhil Rao <nikhil.rao at intel.com>
> > Signed-off-by: Gage Eads <gage.eads at intel.com>
> > ---
> > lib/librte_eventdev/rte_event_crypto_adapter.h | 532
> > +++++++++++++++++++++++++
> > 1 file changed, 532 insertions(+)
> > create mode 100644 lib/librte_eventdev/rte_event_crypto_adapter.h
> >
> > diff --git a/lib/librte_eventdev/rte_event_crypto_adapter.h
> > b/lib/librte_eventdev/rte_event_crypto_adapter.h
> > new file mode 100644
> > index 0000000..aa4f32c
> > --- /dev/null
> > +++ b/lib/librte_eventdev/rte_event_crypto_adapter.h
> > @@ -0,0 +1,532 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2017-2018 Intel Corporation */
> > +
> > +#ifndef _RTE_EVENT_CRYPTO_ADAPTER_
> > +#define _RTE_EVENT_CRYPTO_ADAPTER_
>
> 1) Please rebase to next-eventdev tree, If everything goes well, we will try to
> add it in RC2.
Ok
>
> 2) Please update MAINTAINERS section in this patch set with just one
> rte_event_crypto_adapter.h file and as when you add new files update the new
> files in the MAINTAINERS file
Ok
>
> > +
> > +/**
> > + * @file
> > + *
> > + * RTE Event crypto adapter
> > + *
> > + * Eventdev library provides couple of adapters to bridge between
> > +various
> > + * components for providing new event source. The event crypto
> > +adapter is
> > + * one of those adapter which is intended to bridge between event
> > +devices
> > + * and crypto devices.
> > + *
> > + * The crypto adapter adds support to enqueue/dequeue crypto
> > +operations to/
> > + * from event device. The packet flow between crypto device and the
> > +event
> > + * device can be accomplished using both SW and HW based transfer
> mechanisms.
> > + * The adapter uses an EAL service core function for SW based packet
> > +transfer
> > + * and uses the eventdev PMD functions to configure HW based packet
> > +transfer
> > + * between the crypto device and the event device.
> > + *
> > + * The application can choose to submit a crypto operation directly
> > +to
> > + * crypto device or send it to the crypto adapter via eventdev, the
> > +crypto
> > + * adapter then submits the crypto operation to the crypto device.
> > + * The first mode is known as the dequeue only (DEQ_ONLY) mode and
> > +the
> > + * second as the enqueue - dequeue (ENQ_DEQ) mode. The choice of mode
> > +can
> > + * be specified while creating the adapter.
>
> We need to tell why these modes are required or use of it/when to use what
> like, OPS_NEW does not maintain ingress order. example, use of DEQ_ONLY
> with FWD or ENQ_DEQ mode to use ingress order maintenance.
Sure. I will add some more information for clarity.
>
>
> > + *
> > + *
> > + * Working model of DEQ_ONLY mode:
> > + * ===============================
>
> This diagram is not rendering correctly in doxygen html file.
> check lib/librte_eventdev/rte_eventdev.h as reference.
>
> invoke "make doc-api-html" to see the html output.
>
>
> > + *
> > + * +--------------+ +--------------+
> > + * Events | | | Crypto stage |
> > + * <------>| Event device |-------->| + enqueue to |
> > + * | | | cryptodev |
> > + * +--------------+ +--------------+
> > + * event ^ |
> > + * enqueue| | crypto
> > + * | v enqueue
> > + * +--------------+ +--------------+
> > + * | | | |
> > + * |Crypto adapter|<--------| Cryptodev |
> > + * | | | |
> > + * +--------------+ +--------------+
> > + *
>
> I think, we need to add sequence of numbers scheme to define the data flow for
> this diagram as it is complex.
>
> something like, ------[1]----> and describe the action means.
Sure. I will add sequence number to the flow. Akhil also have some concern on this.
With the sequence number, it be will be more clear.
>
> > + * In the DEQ_ONLY mode, application submits crypto operations
> > + directly to
> > + * crypto device. The adapter then dequeues crypto completions from
> > + crypto
> > + * device and enqueue events to the event device.
> > + * In this mode, application needs to specify event information
> > + (response
> > + * information) which is needed to enqueue an event after the crypto
> > + operation
> > + * is completed.
> > + *
> > + *
> > + * Working model of ENQ_DEQ mode:
> > + * ==============================
> > + *
> > + * +--------------+ +--------------+
> > + * Events | | | |
> > + * <------>| Event device |-------->| Crypto stage |
> > + * | | | |
> > + * +--------------+ +--------------+
>
> I think, instead of "crypto stage", it is better to call it as "atomic stage"
> something like that where the source queue's(ORDERED mode) ingress order will
> be updated in that stage and then enqueue to cryptodev happens for ingress
> order maintenance.
Ok.
>
> > + * event ^ |
> > + * enqueue| | event
> > + * | v dequeue
> > + * +---------------------------------------+
> > + * | |
> > + * | Crypto adapter |
> > + * | |
> > + * +---------------------------------------+
> > + * ^
> > + * | crypto
> > + * | enq/deq
> > + * v
> > + * +-------------+
> > + * | |
> > + * | Cryptodev |
> > + * | |
> > + * +-------------+
>
> Same as above comments for the diagram(i.e adding sequence number)
Ok
>
> > + *
> > + * In the ENQ_DEQ mode, application sends crypto operations as events
> > + to
> > + * the adapter which dequeues events and perform cryptodev operations.
> ^^^^^^^
> Not to the adapter, right?. applications sends to the eventdev through ports
> available through rte_event_crypto_adapter_event_port_get() eventdev port.
> Right?
>
> Please reword if it makes sense.
It is to the adapter through eventdev.
May be elaborating little more something like, application gets crypto adapter's
event port by rte_event_crypto_adapter_event_port_get() API.
Application links it's event queue to this event port and starts enqueuing crypto
operations as events. Adapter dequeue these events and submit the crypto operations
to the cryptodev.
Does this make sense?
>
> > + * The adapter dequeues crypto completions from cryptodev and enqueue
> > + * events to the event device.
> > + * In this mode, the application needs to specify the cryptodev ID
> > + * and queue pair ID (request information) needed to enqueue a crypto
> > + * operation in addition to the event information (response
> > + information)
> > + * needed to enqueue an event after the crypto operation has completed.
> > + *
> > + *
> > + * The event crypto adapter provides common APIs to configure the
> > + packet flow
> > + * from the crypto device to event devices for both SW and HW based
> transfers.
> > + * The crypto event adapter's functions are:
> > + * - rte_event_crypto_adapter_create_ext()
> > + * - rte_event_crypto_adapter_create()
> > + * - rte_event_crypto_adapter_free()
> > + * - rte_event_crypto_adapter_queue_pair_add()
> > + * - rte_event_crypto_adapter_queue_pair_del()
> > + * - rte_event_crypto_adapter_start()
> > + * - rte_event_crypto_adapter_stop()
> > + * - rte_event_crypto_adapter_stats_get()
> > + * - rte_event_crypto_adapter_stats_reset()
> > +
> > + * The applicaton creates an instance using
> > + rte_event_crypto_adapter_create()
>
> s/application/application
>
> > + * or rte_event_crypto_adapter_create_ext().
> > + *
> > + * Cryptodev queue pair addition/deletion is done using the
> > + * rte_event_crypto_adapter_queue_pair_xxx() APIs.
>
> I think, we can mention the connection of
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND capability
> here.
Ok
>
> > + *
> > + * The SW adapter or HW PMD uses rte_crypto_op::sess_type to decide
> > + whether
> > + * request/response(private) data is located in the crypto/security
> > + session
> > + * or at an offset in the rte_crypto_op.
> > + * The rte_crypto_op::private_data_offset provides an offset to
> > + locate the
> > + * request/response information in the rte_crypto_op.
> > + *
> > + * For session-based operations, the set and get API provides a
> > + mechanism for
> > + * an application to store and retrieve the data information stored
> > + * along with the crypto session.
>
> I think, we can mention the connection of
> RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA capability here.
Ok
>
> > +
> > + * For session-less mode, the adapter gets the private data
> > + information placed
> > + * along with the ``struct rte_crypto_op``.
> > + * The ``rte_crypto_op::private_data_offset`` indicates the start of
> > + private
> > + * data information. The offset is counted from the start of the
> > + rte_crypto_op
> > + * including initialization vector (IV).
> > + */
> > +
> > +#ifdef __cplusplus
> > +extern "C" {
> > +#endif
> > +
> > +#include <stdint.h>
> > +
> > +#include "rte_eventdev.h"
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this enum may change without prior notice
> > + *
> > + * Crypto event adapter mode
> > + */
> > +enum rte_event_crypto_adapter_mode {
> > + RTE_EVENT_CRYPTO_ADAPTER_DEQ_ONLY = 1,
>
> Why to mark it as explicit '1' ?
Nothing specific. Have 0 & 1?
>
>
> > + /**< Start only dequeue part of crypto adapter.
> > + * Application submits crypto requests to the cryptodev.
> > + * Adapter only dequeues the crypto completions from cryptodev
> > + * and enqueue events to the eventdev.
>
> I think, you can mention the connection with below capabilities here.
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD
> and @see of those here.
This enum can be renamed to OP_NEW & OP_FWD.
So, the adapter will be configured with OP_NEW/OP_FWD mode.
>
>
> > + */
> > + RTE_EVENT_CRYPTO_ADAPTER_ENQ_DEQ,
> > + /**< Start both enqueue & dequeue part of crypto adapter.
> > + * Application submits crypto requests as events to the crypto
> > + * adapter. Adapter submits crypto requests to the cryptodev
> > + * and crypto completions are enqueued back to the eventdev.
>
> IMO, You can add note when this mode will be used by application if device is
> not capable of RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD
> and application need ingress order maintenance or something like that.
Ok
>
> > + */
> > +};
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this structure may change without prior notice
> > + *
> > + * Crypto event request structure will be filled by application to
> > + * provide event request information to the adapter.
> > + */
> > +struct rte_event_crypto_request {
> > + uint8_t resv[8];
> > + /**< Overlaps with first 8 bytes of struct rte_event
> > + * that encode the response event information
>
> May be we could add more comments on application usage on updating struct
> rte_event based field updating for response event information.
Thought, struct name itself is self-explanatory. It will try to add some more comments.
>
> > + */
> > + uint16_t cdev_id;
> > + /**< cryptodev ID to be used */
> > + uint16_t queue_pair_id;
> > + /**< cryptodev queue pair ID to be used */
> > + uint32_t resv1;
>
> How about rsvd ? No strong opinion though.
resv is used as array. So resv1.
>
> I think, you can add, Valid when it adapter is in ENQ_DEQ mode
Ok
>
> > + /**< Reserved bits */
> > +};
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this structure may change without prior notice
> > + *
> > + * Crypto event metadata structure will be filled by application
> > + * to provide crypto request and event response information.
> > + *
> > + * If crypto events are enqueued using a HW mechanism, the cryptodev
> > + * PMD will use the event response information to set up the event
> > + * that is enqueued back to eventdev after completion of the crypto
> > + * operation. If the transfer is done by SW, event response
> > +information
> > + * will be used by the adapter.
> > + */
> > +union rte_event_crypto_metadata {
> > + struct rte_event_crypto_request request_info;
>
> I think, you can add, Provided by application for ENQ_DEQ mode
Ok
>
> > + struct rte_event response_info;
>
> I think, you can add, Provided by application for ENQ_DEQ and DEQ_ONLY
> mode.
Ok
>
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this structure may change without prior notice
> > + *
> > + * Queue pair configuration structure containing event information.
> > + * @see
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND
> > + */
> > +struct rte_event_crypto_queue_pair_conf {
> > + struct rte_event ev;
>
> MO, As Akhil said, we can pass struct rte_event directly.
Yes. I will remove this in next patch.
>
> > +};
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Create a new event crypto adapter with the specified identifier.
> > + * This function uses an internal configuration function that creates
> > +an event
> > + * port. This default function reconfigures the event device with an
> > + * additional event port and setups up the event port using the
> > +port_config
> > + * parameter passed into this function. In case the application needs
> > +more
> > + * control in configuration of the service, it should use the
> > + * rte_event_crypto_adapter_create_ext() version.
> > + *
> > + * @param id
> > + * Adapter identifier.
> > + *
> > + * @param dev_id
> > + * Event device identifier.
> > + *
> > + * @param port_config
> > + * Argument of type *rte_event_port_conf* that is passed to the
> > +conf_cb
> > + * function.
> > + *
> > + * @param mode
> > + * Flag to indicate to start dequeue only or both enqueue & dequeue.
> > + *
> > + * @return
> > + * - 0: Success
> > + * - <0: Error code on failure
> > + */
> > +int __rte_experimental
> > +rte_event_crypto_adapter_create(uint8_t id, uint8_t dev_id,
> > + struct rte_event_port_conf *port_config,
> > + enum rte_event_crypto_adapter_mode mode);
>
> - Detecting what to pass (RTE_EVENT_CRYPTO_ADAPTER_DEQ_ONLY or
> RTE_EVENT_CRYPTO_ADAPTER_ENQ_DEQ)
> in application need a lot checks based on capabilities, instead, How about
> passing whats been desired by the application by adding a new
> enum(RTE_EVENT_CRYPTO_ADAPTER_MODE_OP_NEW or
> RTE_EVENT_CRYPTO_ADAPTER_MODE_OP_FWD).
> and internally based on mode selected and the device capability, the common
> code can choose RTE_EVENT_CRYPTO_ADAPTER_DEQ_ONLY in NEW or FWD
> mode vs RTE_EVENT_CRYPTO_ADAPTER_ENQ_DEQ.
I will rename the mode to OP_NEW and OP_FWD.
>
> - We could add common code based API to return the exiting configured mode.
>
> enum rte_event_crypto_adapter_mode mode __rte_experimental
> rte_event_crypto_adapter_mode_get(uint8_t id, uint8_t dev_id);
Since the existing enum is renamed, this API will not be useful.
>
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Free an event crypto adapter
> > + *
> > + * @param id
> > + * Adapter identifier.
> > + *
> > + * @return
> > + * - 0: Success
> > + * - <0: Error code on failure, If the adapter still has queue pairs
> > + * added to it, the function returns -EBUSY.
> > + */
> > +int __rte_experimental
> > +rte_event_crypto_adapter_free(uint8_t id);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Add a queue pair to an event crypto adapter.
> > + *
> > + * @param id
> > + * Adapter identifier.
> > + *
> > + * @param cdev_id
> > + * Cryptodev identifier.
> > + *
> > + * @param queue_pair_id
> > + * Cryptodev queue pair identifier. If queue_pair_id is set -1,
> > + * adapter adds all the pre configured queue pairs to the instance.
> > + *
> > + * @param conf
> > + * Additional configuration structure of type
> > + * *rte_event_crypto_queue_pair_conf*
>
> @see RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND
Ok
More information about the dev
mailing list